AM2754-Q1
- Dual or Quad-core Arm Cortex R5F CPU with each core running up to 1GHz
- 32KB I-Cache with 64-bit ECC per CPU core
- 4x8KB association
- Single Error Correction, Double Error Detection ECC protected per 64 bits
- 32KB D-cache with 64-bit ECC per CPU core
- 4x8KB association
- Single Error Correction, Double Error Detection ECC protected per 64 bits
- 64KB Tightly Coupled Memory (TCM) per core, with 32-bit ECC
- Single Error Correction, Double Error Detection ECC protected per 64 bits
- Two Banks, A and B, 32KB each
- Bank B split into B0 and B1, 16KB each
- 128KB TCM for CPU0 in lockstep mode
- Up to 128KB Remote L2 Cache
- 32B cache line
- Up to 128KB L2 cache covering up to 16MB cacheable space
- Read only, 8-way cache
- Fast Local Copy (FLC) support
- For each cluster, lockstep or independent dual core operation supported
- 32KB I-Cache with 64-bit ECC per CPU core
- Single or Dual C7x DSP core with each core running up to 1GHz
- L1 memory architecture
- 32KB I-Cache per core
- 64KB D-Cache per core
- L2 memory architecture
- 2.25MB with ECC protection on L2 SRAM
- 2MB "Main" segment
- 256KB "Auxiliary" segment
- 2.25MB with ECC protection on L2 SRAM
- Matrix Multiply Accelerator Version 2f (MMA2F) on DSP0
- L1 memory architecture
- 2x Asynchronous Audio Sample Rate Converter (ASRC)
- 140dB Signal-to-Noise ratio (SNR)
- Up to 8 pairs of input and output streams (up to 16 channels total) per ASRC
- Input and output sample rates from 8KHz to 216KHz
- 16-, 18-, 20-, 24-bit data input/output
Memory Subsystem:
- Up to 6MB of On-Chip Shared SRAM
-
Remote Low latency L2 cache (RL2), software programmable, allocated from SRAM
- 432KB of On-Chip SRAM in SMS Subsystem
- 256KB of On-Chip RAM with SECDED ECC in SMS Subsystem
- 176KB of On-Chip RAM with SECDED ECC in SMS Subsystem for TI security firmware
- 2 × Flash Sub Systems (FSS) that support Octal Serial Peripheral Interface (OSPI) at up to 166MHz SDR and 166MHz DDR at 1.8V and 3.3V with full XIP (eXecute In Place) which can be used for
- 1x FSS supporting OSPI OptiFlash memory technology, Firmware Over-The-Air upgrades (FOTA), and On The Fly Advanced Encryption Standard (OTFA)
- 1x FSS supporting OSPI or HyperRAM
- RAM expansion
- 1 × 8-bit Multi-Media Card/Secure Digital (eMMC/SD) interface
- 5 × Multichannel Audio Serial Ports (McASP)
- Transmit and Receive Clocks up to 50MHz
- Up to 26 Serial Data Pins across 5x McASP with Independent TX and RX Clocks
- Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S) and Similar Formats
- Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 Formats)
- FIFO Buffers for Transmit and Receive (256 Bytes)
- Support for audio reference output clock
- 8 × Universal Asynchronous RX-TX (UART) modules
- 5 × Serial Peripheral Interface (SPI) controllers
- 8 × Inter-Integrated Circuit (I2C) ports
- 5 × Modular Controller Area Network (MCAN) modules with CAN-FD support
- 3 × Enhanced Pulse Width Modulation (ePWM) modules
- 6 × Enhanced Capture (ECAP) modules
- 1 × 12-bit Analog to Digital Converters (ADC) with 4MSPS maximum sampling rate
- Up to 167 General Purpose I/O (GPIO)
- Integrated Ethernet Switch supporting (total 2 external ports)
- RMII (10/100) or RGMII (10/100/1000)
- IEEE 1588 (Annex D, Annex E, Annex F with 802.1AS PTP)
- Supports 802.1Qav (eAVB)
- Clause 45 MDIO PHY management
- Packet Classifier based on ALE engine with 512 classifiers
- Priority flow control
- Four CPU hardware interrupt pacing
- IP/ UDP/ TCP checksum offload in hardware
- USB 2.0
- Port configurable as USB host, USB device, or USB Dual-Role device
- Integrated USB VBUS detection
- Hardware Security Module (HSM)
- Dedicated dual-core ARM Cortex-M4F Security co-processor with dedicated interconnect for security
- Dedicated security DMA and IPC subsystem for isolated processing
- Secure boot support
- Hardware-enforced Root-of-Trust (RoT)
- Support to switch RoT via backup key
- Support for takeover protection, IP protection, and anti-roll back protection
- Cryptographic acceleration supported
- Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
- Supports cryptographic cores
- AES - 128/192/256-bit key sizes
- SHA2 - 224/256/384/512-bit support
- DRBG with true random number generator
- PKA (Public Key Accelerator) to Assist in RSA/ECC processing: RSA-4096 bits, ECDSA, SM2DSA, Curve25519/448
- Supports Chinese crypto algorithms: SM3 and SM4
- DMA support
- Debugging security
- Secure software controlled debug access
- Security aware debugging
- Trusted Execution Environment (TEE) supported
- Arm TrustZone based TEE
- Extensive firewall support for isolation
- Secure watchdog/timer/IPC
- Secure storage support
- On-the-Fly encryption and support for OSPI interface in XIP mode
- Functional Safety-Compliant targeted [Automotive]
- Developed for functional safety applications
- Documentation to be made available to aid ISO 26262 functional safety system design
- Systematic capability up to ASIL-D targeted
- Hardware integrity up to ASIL-B targeted
- Safety-related certification
- ISO 26262 planned
- Power modes supported by Device Manager:
- Active
- Standby
- IO Retention
- UART
- I2C EEPROM
- OSPI NOR/NAND Flash
- SD Card
- eMMC
- USB (host) Mass Storage
- USB (device) boot from external host (DFU mode)
- Ethernet
- AEC-Q100 qualified for automotive applications
- 16-nm FinFET technology
- 15.8mm x 15.8mm, 0.8mm pitch 361-pin FCCSP
The AM275x family of highly-integrated, high-performance microcontrollers is based on the Arm Cortex R5F and C7x floating point DSP cores. The microcontrollers enable original equipment manufacturers (OEM) and original design manufacturers (ODM) to quickly bring to market devices with robust software support and rich user interfaces. The device offers the maximum flexibility of a fully integrated, mixed processor design
Key features and benefits:
- Extensive audio interfacing with 5x McASP peripherals
- Peripherals supporting system level connectivity such as 2-port Gigabit Ethernet, USB, OSPI/QSPI, CAN-FD, UARTs, SPI and GPIOs.
- Supports the latest cybersecurity requirements with the built-in Hardware Security Module (HSM).
- One or two dual-core R5F clusters with 128KB TCM per cluster (64KB per core) and up to two C7x DSP cores with 2.25MB of L2 SRAM per C7x DSP, greatly reducing the need for external memory.

詳細リクエスト
AM2754-Q1 に対応する機能安全の詳細資料ご注文
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | AM275x Signal Processing Microcontrollers データシート (Rev. A) | PDF | HTML | 2025年 7月 27日 | ||
* | エラッタ | AM275x Errata (Rev. A) | PDF | HTML | 2025年 7月 29日 | ||
* | ユーザー・ガイド | AM275x Technical Reference Manual (Rev. A) | PDF | HTML | 2025年 8月 19日 | ||
EVM ユーザー ガイド (英語) | AM275x Evaluation Module User's Guide (Rev. C) | PDF | HTML | 2025年 6月 17日 | |||
ホワイト・ペーパー | 用於高端汽車音訊的高度整合 DSP 如何重新定義駕駛體驗 | PDF | HTML | 2025年 4月 17日 | |||
ホワイト・ペーパー | 車載用プレミアムオーディオ向け高集 積 DSP が、ドライビングエクスペリエ ンスを再定義する理由 | PDF | HTML | 英語版 | 2025年 4月 17日 | ||
ホワイト・ペーパー | 프리미엄 차량용 오디오를 위한 고도로 통합된 DSP가 운전 환경을 새롭게 정의하는 방법 | PDF | HTML | 2025年 4月 17日 |
設計および開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
AUDIO-AM275-EVM — AM275x オーディオの評価基板
DP83867-EVM-AM — AM2x および AM6x 産業用イーサネット PHY アドオン ボードの評価基板
DP83867-EVM-AM は、産業用イーサネット PHY アドオン ボードであり、Arm ベースの高性能マイコンの評価基板と組み合わせて使用することを想定しています。このアドオン ボードは、評価基板 (EVM) を使用する初期イーサネット評価とプロトタイプ製作に最適です。DP83867-EVM-AM は、RGMII インターフェイスを搭載した低レイテンシの 10/100/1000Mbps PHY である TI の DP83867IR と、標準的な RJ45 イーサネット ネットワーク コネクタを 1 個搭載しています。DP83867-EVM-AM は、AUDIO-AM275-EVM (...)
TAS67CD-AEC — TAS67CD-AEC Class-D アンプのオーディオ拡張カード
AM275-FREERTOS-SDK — FreeRTOS SDK for AM275 – RTOS, No-RTOS
サポート対象の製品とハードウェア
製品
デジタル信号プロセッサ (DSP)
ハードウェア開発
評価ボード
AM275X-RESTRICTED-DOCS-ADVANCE — AM275 Hardware Design Guidelines and Schematic Checklist
サポート対象の製品とハードウェア
製品
デジタル信号プロセッサ (DSP)
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
サポート対象の製品とハードウェア
製品
Arm Cortex-M0+ マイコン
MSP430 マイコン
Arm Cortex-R マイコン
Arm ベースのプロセッサ
C2000 リアルタイム マイコン
デジタル信号プロセッサ (DSP)
Sub-1GHz ワイヤレス マイコン
低消費電力 2.4GHz 製品
車載ワイヤレス接続製品
車載ミリ波レーダー センサ
産業用ミリ波レーダー センサ
ハードウェア開発
ドーター・カード
C7000-CGT — C7000 code generation tools (CGT) - compiler
The TI C7000 C/C++ Compiler Tools support development of applications for TI C7000 Digital Signal Processor cores.
Code Composer Studio is the Integrated Development Environment (IDE) for TI embedded devices. If you are looking to develop on a TI embedded device it is recommended to start (...)
サポート対象の製品とハードウェア
製品
Arm ベースのプロセッサ
デジタル信号プロセッサ (DSP)
C7000-SAFETI-CQKIT-RV — C7000 安全コンパイラ認証キット(コンパイラのリリース検証機能を利用)
The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.
The Safety Compiler Qualification Kit:
- is free of charge for TI customers
- does (...)
サポート対象の製品とハードウェア
製品
Arm ベースのプロセッサ
デジタル信号プロセッサ (DSP)
CCSTUDIO — Code Composer Studio 統合開発環境(IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
サポート対象の製品とハードウェア
こちらの設計リソースは、このカテゴリに属する製品の大半をサポートしています。
サポート状況を確認するには、製品の詳細ページをご覧ください。
-
parametric-filter デジタル信号プロセッサ (DSP) -
parametric-filter Arm ベースのプロセッサ -
parametric-filter MSP430 マイコン -
parametric-filter C2000 リアルタイム マイコン -
parametric-filter Arm ベースのマイコン -
parametric-filter シグナル コンディショナ -
parametric-filter ミリ波レーダー センサ -
parametric-filter Wi-Fi 製品 -
parametric-filter Sub-1GHz 製品 -
parametric-filter デジタル電源絶縁型コントローラ
K3-RESOURCE-CONFIGURATION — Resource partitioning tool for multi core SOCs
サポート対象の製品とハードウェア
製品
Arm ベースのプロセッサ
デジタル信号プロセッサ (DSP)
SYSCONFIG — SysConfigのスタンドアロン・デスクトップ・バージョン
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
サポート対象の製品とハードウェア
製品
車載ミリ波レーダー センサ
デジタル信号プロセッサ (DSP)
C2000 リアルタイム マイコン
Wi-Fi 製品
Arm ベースのプロセッサ
産業用ミリ波レーダー センサ
Arm Cortex-M4 マイコン
Arm Cortex-M0+ マイコン
Arm Cortex-R マイコン
Sub-1GHz ワイヤレス マイコン
車載ワイヤレス接続製品
低消費電力 2.4GHz 製品
AM27X-ACADEMY — AM27x Academy
サポート対象の製品とハードウェア
製品
デジタル信号プロセッサ (DSP)
ソフトウェア
ソフトウェア開発キット (SDK)
パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
---|---|---|
FCCSP (ANJ) | 361 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。