Home Amplifiers Operational amplifiers (op amps) High-speed op amps (GBW ≥ 50 MHz)
Home
Amplifiers
Operational amplifiers (op amps)
High-speed op amps (GBW ≥ 50 MHz)

OPA818

ACTIVE

2.7-GHz, 13-V, decompensated 7-V/V, FET-input operational amplifier

Order now
Data sheet

OPA818

ACTIVE
Data sheet Order now

Product details

Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 13 GBW (typ) (MHz) 2700 BW at Acl (MHz) 765 Acl, min spec gain (V/V) 7 Slew rate (typ) (V/µs) 1400 Vn at flatband (typ) (nV√Hz) 2.2 Vn at 1 kHz (typ) (nV√Hz) 8.5 Iq per channel (typ) (mA) 27.7 Vos (offset voltage at 25°C) (max) (mV) 1.25 Rail-to-rail No Features Decompensated Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 90 Input bias current (max) (pA) 25 Offset drift (typ) (µV/°C) 3 Iout (typ) (mA) 55 2nd harmonic (dBc) -84 3rd harmonic (dBc) -106 Frequency of harmonic distortion measurement (MHz) 1
Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 13 GBW (typ) (MHz) 2700 BW at Acl (MHz) 765 Acl, min spec gain (V/V) 7 Slew rate (typ) (V/µs) 1400 Vn at flatband (typ) (nV√Hz) 2.2 Vn at 1 kHz (typ) (nV√Hz) 8.5 Iq per channel (typ) (mA) 27.7 Vos (offset voltage at 25°C) (max) (mV) 1.25 Rail-to-rail No Features Decompensated Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 90 Input bias current (max) (pA) 25 Offset drift (typ) (µV/°C) 3 Iout (typ) (mA) 55 2nd harmonic (dBc) -84 3rd harmonic (dBc) -106 Frequency of harmonic distortion measurement (MHz) 1
WSON (DRG) 8 9 mm² 3 x 3
  • High speed:
    • Gain-bandwidth product (GBWP): 2.7GHz
    • Bandwidth (G = 7V/V): 765MHz
    • Large-signal bandwidth (2VPP): 400MHz
    • Slew rate: 1400V/µs
  • Decompensated gain: 7V/V stable
  • Low noise:
    • Input voltage noise: 2.2nV/√Hz
    • Input current noise: 3fA/√Hz (f = 10kHz)
  • Input bias current: 4pA (typical)
  • Low input capacitance:
    • Common-mode: 1.9pF
    • Differential mode: 0.5pF
  • Low distortion (G = 7V/V, RL = 1kΩ, VO = 2VPP):
    • HD2, HD3 at 1MHz: –104dBc, –108dBc
    • HD2, HD3 at 50MHz: –57dBc, –72dBc
  • Wide supply range: 6V to 13V
  • Output swing: 8VPP (VS = 10V)
  • Supply current: 27.7mA
  • Shutdown supply current: 27µA
  • Performance upgrade to OPA657
  • High speed:
    • Gain-bandwidth product (GBWP): 2.7GHz
    • Bandwidth (G = 7V/V): 765MHz
    • Large-signal bandwidth (2VPP): 400MHz
    • Slew rate: 1400V/µs
  • Decompensated gain: 7V/V stable
  • Low noise:
    • Input voltage noise: 2.2nV/√Hz
    • Input current noise: 3fA/√Hz (f = 10kHz)
  • Input bias current: 4pA (typical)
  • Low input capacitance:
    • Common-mode: 1.9pF
    • Differential mode: 0.5pF
  • Low distortion (G = 7V/V, RL = 1kΩ, VO = 2VPP):
    • HD2, HD3 at 1MHz: –104dBc, –108dBc
    • HD2, HD3 at 50MHz: –57dBc, –72dBc
  • Wide supply range: 6V to 13V
  • Output swing: 8VPP (VS = 10V)
  • Supply current: 27.7mA
  • Shutdown supply current: 27µA
  • Performance upgrade to OPA657

The OPA818 is a decompensated, voltage-feedback operational amplifier for high-speed and wide-dynamic-range applications. The OPA818 has a low-noise JFET input stage that combines high gain-bandwidth with a wide supply range from 6V to 13V. The fast slew rate (1400V/µs) provides high, large-signal bandwidth and low distortion. This amplifier is manufactured using TI’s proprietary, high-speed, silicon-germanium (SiGe) process to achieve significant performance improvements over other high-speed, FET-input amplifiers.

The OPA818 is an extremely versatile, wideband TIA photodiode amp for use in optical test and communication equipment, and many medical, scientific, and industrial instruments. The OPA818 showcases a 2.7GHz GBWP, low 2.4pF total input capacitance, and 2.2nV/√Hz input noise. The OPA818 achieves over 85MHz signal bandwidth in a TIA configuration with 20kΩ TIA gain (RF) and 0.5pF photodiode capacitance (CD) with wide output swings. The low-noise architecture with picoampere of input bias current is also an excellent choice for test and measurement applications. Though typically stable in gains ≥ 7V/V, the OPA818 is designed for use in applications with lower gains by applying noise-gain shaping techniques.

The OPA818 is available in an 5-pin SOT-23 package and an 8-lead WSON package with an exposed thermal pad for heat dissipation. This device is specified for operation over the industrial temperature range of –40°C to +85°C.

The OPA818 is a decompensated, voltage-feedback operational amplifier for high-speed and wide-dynamic-range applications. The OPA818 has a low-noise JFET input stage that combines high gain-bandwidth with a wide supply range from 6V to 13V. The fast slew rate (1400V/µs) provides high, large-signal bandwidth and low distortion. This amplifier is manufactured using TI’s proprietary, high-speed, silicon-germanium (SiGe) process to achieve significant performance improvements over other high-speed, FET-input amplifiers.

The OPA818 is an extremely versatile, wideband TIA photodiode amp for use in optical test and communication equipment, and many medical, scientific, and industrial instruments. The OPA818 showcases a 2.7GHz GBWP, low 2.4pF total input capacitance, and 2.2nV/√Hz input noise. The OPA818 achieves over 85MHz signal bandwidth in a TIA configuration with 20kΩ TIA gain (RF) and 0.5pF photodiode capacitance (CD) with wide output swings. The low-noise architecture with picoampere of input bias current is also an excellent choice for test and measurement applications. Though typically stable in gains ≥ 7V/V, the OPA818 is designed for use in applications with lower gains by applying noise-gain shaping techniques.

The OPA818 is available in an 5-pin SOT-23 package and an 8-lead WSON package with an exposed thermal pad for heat dissipation. This device is specified for operation over the industrial temperature range of –40°C to +85°C.
filter Find other High-speed op amps (GBW ≥ 50 MHz)
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
OPA817 ACTIVE 800-MHz, high-precision unity-gain-stable FET-input operational amplifier High-voltage FET input, unity-gain stable and higher precision (0.2 mV, 1 uV/C)

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet OPA818 2.7GHz, High-Voltage, FET-Input, Low Noise, Operational Amplifier datasheet (Rev. B) PDF | HTML 09 Dec 2025
Product overview High Speed Amplifiers for In-Vitro Diagnostics (IVD) Analog Front End PDF | HTML 10 Apr 2025
EVM User's guide DEM-OPA-DTK-EVM User's Guide PDF | HTML 16 Jun 2022
Application note High Speed ADCs and Amplifiers for Flow Cytometry Applications 12 Oct 2020
Technical article 3 common questions when designing with high-speed amplifiers PDF | HTML 17 Jul 2020
EVM User's guide OPA818DRGEVM Evaluation Module (Rev. A) 26 Feb 2020
Application note Noise Analysis for High Speed Op Amps (Rev. A) 17 Jan 2005

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

OPA818DRGEVM — OPA818 Evaluation Module

The OPA818DRG EVM is an evaluation module for the single OPA818 in the DRG (8-pin WSON) package. The OPA818DRG EVM is designed to quickly demonstrate the functionality and versatility of the amplifier. The EVM is ready to connect to power, signal source, and test instruments by using on-board (...)
User guide: PDF
Not available on TI.com
Simulation model

OPA818 TINA-TI Spice Model (Rev. A)

SBOMAZ1A.TSM (14 KB) - TINA-TI Spice Model
Download
Simulation model

OPA818 Unencrypted TINA-TI Reference Design Package (Rev. A)

SBOMB21A.TSC (172 KB) - TINA-TI Reference Design
Download
Simulation model

PSPICE Circuit Containing OPA818 Model (Rev. B)

SBOMB74B.ZIP (31 KB) - PSpice Model
Download
Calculation tool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Supported products & hardware

Supported products & hardware

Products
Precision op amps (Vos<1mV)
INA1620 — High-fidelity audio operational amplifier with integrated thin-film resistors and EMI filtering OPA130 — Single, 1-MHz, 20-pA bias current, 530-µA power, FET operational amplifier OPA131 — Single, 4-MHz, 50-pA bias current, 750-µA power, FET operational amplifier OPA140 — Single-channel, 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output OPA140A-DIE — 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output OPA145 — Single, 5.5-MHz, high slew rate, low-noise, low-power, RRO precision JFET operational amplifier OPA177 — Precision Operational Amplifier OPA180 — 0.1-μV/°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifier OPA180-Q1 — Automotive-Qualified 0.1μV/°C Drift, Low-Noise, RRO, 36V, Zero-Drift Op Amp OPA182 — Highest-precision, 36-V, 5-MHz, single, low-noise, zero-drift, MUX-friendly amplifier OPA186 — Single, 24-V, low-power (90 μA) 5-μV-offset zero-drift op amp with rail-to-rail input and o OPA187 — Zero drift (10µV, 0.001µV/°C), MUX-friendly, low power, RRO, CMOS precision op amp OPA188 — Precision, Low-Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier OPA188-Q1 — Automotive-Qualified Precision, Low-Noise, RRO, 36V, Zero-Drift Operational Amplifier OPA189 — Single, 14-MHz, mux-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier OPA191 — Low-Power, Precision, 36-V, e-trim CMOS Amplifier OPA192 — High-Voltage, Rail-to-Rail Input/Output, 5µV, 0.2µV/˚C, Precision Operational Amplifier OPA192-Q1 — Automotive High-Voltage Rail-to-Rail Input/Output Precision Op Amp E-Trim™ Series OPA196 — Single, 36-V, low power, all-purpose amplifier with mux-friendly input OPA197 — Single, 36-V, precision, rail-to-rail input output, low offset voltage op amp OPA197-Q1 — Single, automotive 36-V, precision, rail-to-rail input output, low offset voltage op amp OPA202 — Low-noise (0.2 µVPP, 9 nV/√Hz) heavy-capacitive-drive (25 nF) super-beta precision op amp OPA205 — Single, rail-to-rail bipolar precision e-trim™ op amp with low input bias current and low noise OPA206 — Low-power (240 µA) low-noise (8 nV/√Hz) precision e-trim™ op amp with super-beta inputs and OVP OPA207 — Low power (350µA), low noise (7.5nV/√Hz), high precision (100µV, 0.2µV/⁰C), bipolar RRO op amp OPA209 — Single, 2.2-nV/rtHz, 18-MHz, precision, RRO, 36-V operational amplifier OPA210 — 2.2-nV/√Hz, low-power, 36-V operational amplifier OPA211 — 1.1nV/rtHz Noise, Low-Power, Precision Operational Amplifier OPA211-EP — Enhanced Product 1.1nV/rtHz Noise, Low Power, Precision Operational Amplifier OPA211-HT — High Temperature 1.1nV/rtHz Noise, Low Power, Precision Operational Amplifier OPA2130 — Dual, 1-MHz, 20-pA bias current, 530-µA power, FET operational amplifier OPA2131 — Dual, 4-MHz, 50-pA bias current, 750-µA power, FET operational amplifier OPA2140 — Dual-channel, 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output OPA2145 — Dual, 5.5-MHz, high slew rate, low-noise, low-power, RRO precision JFET operational amplifier OPA2156 — Low noise (3-nV/√Hz @10kHz), high speed (25-MHz, 40-V/µs), CMOS precision RRIO dual op amp OPA2180 — 0.1 uV/°C DRIFT, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Op Amp OPA2180-Q1 — Automotive-Qualified 0.1 uV/°C Drift, Low Noise, RRO, 36V, Zero-Drift Op Amp OPA2182 — Industry’s lowest offset drift (0.012 uV/˚C, max), 5.7 nV/rtHz, MUX-friendly 36V op amp OPA2186 — Dual, 24-V, 90-μA 5-μV-offset zero-drift operational amplifier with rail-to-rail input and output OPA2187 — Zero-drift (10µV, 0.001µV/C˚), MUX-friendly, low power, RRO, CMOS precision op amp (dual) OPA2188 — 0.03µV/°C, 6µV Vos, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier OPA2188-Q1 — Automotive-Qualified 0.03µV/°C Drift, 6µV Vos, Low-Noise, RRO, 36V, Zero-Drift Op Amp OPA2189 — Dual, 14-MHz, MUX-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier OPA2191 — Low-power, 36-V, CMOS precision e-trim™ operational amplifier OPA2192 — 36-V, Precision, RRIO, Low Offset Voltage, Low Input Bias Current Op Amp With e-trim OPA2192-Q1 — Automotive 36-V, Precision, RRIO, Low Offset Voltage, Low Input Bias Current Op Amp With e-trim OPA2196 — Dual, 36-V, low power, all-purpose amplifier with mux-friendly input OPA2197 — Dual 36-V, precision, rail-to-rail input output, low offset voltage op amp OPA2197-Q1 — Dual automotive 36-V, precision, rail-to-rail input output, low offset voltage op amp OPA2202 — Low-noise (0.2 µVPP, 9 nV/√Hz), heavy-capacitive-drive (25 nF) dual super-beta precision op amp OPA2205 — Dual, rail-to-rail bipolar precision e-trim™ op amp with low input bias current and low noise OPA2206 — OVP ±40-V, low-power, low-noise, precision amplifier with e-trim™ and super beta input transistors OPA2209 — Dual, 2.2-nV/rtHz, 18-MHz, precision, RRO, 36-V operational amplifier OPA2210 — Ultra-low noise (2.2-nV/√Hz), super beta (0.3nA), high precision (5µV, 0.1µV/°C), 36-V, dual op amp OPA2211-EP — 1.1 nV/√Hz Noise, Low Power, Precision Operational Amplifier OPA2211-HT — 1.1nV/rtHz noise, low power, precision op amp OPA2211A — 1.1nV/rtHz Noise, Low Power, Precision Operational Amplifier OPA2227 — Dual high precision, low noise operational amplifiers OPA2227-EP — Enhanced Product High Precision, Low Noise Operational Amplifier OPA2228 — Dual, wide bandwidth, high precision, low noise operational amplifiers OPA2237 — Dual Single-Supply Operational Amplifiers MicroAmplifier™ Series OPA2241 — Dual, 5V single-supply, micro power operational amplifiers OPA2251 — Dual, 15V single-supply, micro power operational amplifiers OPA227 — High Precision, Low Noise Operational Amplifiers OPA2277 — 10µV, 0.1µV/˚C, High-Precision, Low-Power Operational Amplifier OPA2277-EP — Enhanced Product High Precision Operational Amplifier OPA228 — 33-MHz, 3-nV/√Hz noise, high precision operational amplifiers OPA2317 — Dual, Low Offset, Rail-to-Rail I/O Operational Amplifier OPA2317-Q1 — OPAx317-Q1 Low-Offset, Rail-to-Rail I/O Operational Amplifier OPA2320 — Dual, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier OPA2320-Q1 — Automotive, dual, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS op amp OPA2325 — Dual precision, wide bandwidth, low noise, low power ADC driving op amp with RRIO and zero-crossover OPA2328 — Dual-channel, precision, 50-µV offset voltage, 40-MHz wide-bandwidth RRIO CMOS op amp OPA2330 — Dual, 1.8-V, 35-µA, micropower, precision, zero drift CMOS op amp OPA2333 — 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier OPA2333-HT — High-temperature, 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier OPA2333-Q1 — Automotive, 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier OPA2333A-EP — Enhanced-product, 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier OPA2333P — 1.8-V, 17-µA, two-channel, micropower zero-drift CMOS operational amplifier with >300-kHz GBW OPA2334 — Dual 0.05uV/C max, single-supply CMOS operational amplifier with shutdown OPA2335 — Dual 0.05uV/C max, single-supply CMOS operational amplifier OPA2335M — 0.05uV/C max, Single-Supply CMOS Operational Amplifier OPA2336 — Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier Series OPA2340 — Dual single-supply, rail-to-rail, low power operational amplifier OPA2350 — Dual single-supply, rail-to-rail, high speed, low-noise operational amplifier OPA2369 — Dual, 1.8-V, 700-nA, zero-crossover rail-to-rail I/O operational amplifier OPA237 — Single-Supply Operational Amplifiers MicroAmplifier™ Series OPA2376 — Dual, precision, low-noise, low quiescent current operational amplifier OPA2376-Q1 — Low Noise, Low Quiescent Current, Precision Operational Amplifier e-trim/trade OPA2377 — Low-Cost, Low Noise, 5MHz CMOS Operational Amplifier OPA2377-Q1 — Automotive-Qualified, Rail-to-Rail In/Out, Low Noise, 5MHz CMOS Operational Amplifier OPA2378 — Dual, low-noise, 900-kHz, RRIO, precision operational amplifier, zero-drift series OPA2381 — Precision, Low Power, Transimpedance Amplifier OPA2383 — Dual, zero-drift, micropower (65μA), high speed-to-power ratio (2.5MHz) RRIO operational amplifier OPA2387 — Ultra-high-precision zero-drift low-input-bias-current operational amplifier OPA2388 — Dual, 10-MHz, CMOS, zero-drift, zero-crossover, true RRIO precision operational amplifier OPA2388-Q1 — Dual, automotive qualified, wide-bandwidth, zero-drift, zero-crossover, precision amplifier OPA2391 — Dual, micropower, high speed-to-power ratio low-bias-current RRIO precision operational amplifier OPA2392 — Dual, low-offset (10μV), low-noise (4.4nV/rtHz @10kHz) femtoamp-bias-current e-trim™ op amp OPA2397 — Dual, low-offset (60 µV), low-noise, low-bias-current RRIO e-trim™ operational amplifier OPA241 — Single, 5V single-supply, micro power operational amplifiers OPA251 — Single, 15V single-supply, micro power operational amplifiers OPA2596 — Dual-channel 85V high speed-to-power ratio (100V/µs to 400µA) precision operational amplifier OPA27 — Ultra-low-noise (4.5-nV/√Hz), 100-µV offset, unity gain stable precision operational amplifier OPA2727 — e-trim™20MHz, High Precision CMOS Operational Amplifier OPA2734 — Dual 0.05uV/degC (max) single-supply CMOS operational amplifier, zero-drift series with shutdown OPA2735 — Dual 0.05uV/degC (max) single-supply CMOS operational amplifier, zero-drift series OPA277 — Dual, 36-V, 10µV offset, 0.1µV/˚C drift, bipolar, operational amplifier OPA2828 — Dual, high-speed (45 MHz and 150 V/μs), 36-V, low-noise (4 nV/√Hz) RRO JFET operational amplifier OPA317 — Low Offset, Rail-to-Rail I/O Operational Amplifier OPA317-Q1 — Automotive-Qualified Operational Amplifier with Low-Offset, RRIO, and Low Current Consumption OPA320 — Precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier OPA320-Q1 — Automotive qualified, precision, zero-crossover, 20-MHz, 0.9-pA Ib, RRIO, CMOS operational amplifier OPA325 — Low noise (10nV/rtHz), wide bandwidth (10MHz), low power (0.65mA), zero crossover op amp OPA328 — Precision, zero-crossover, 50μV offset voltage, 40MHz wide-bandwidth RRIO CMOS operational amplifier OPA330 — Single, 1.8-V, 35-µA, micropower, precision, zero drift CMOS op amp OPA333 — Micropower, 1.8-V, 17-µA zero-drift CMOS precision operational amplifier OPA333-Q1 — Automotive, micropower, 1.8-V, 17-µA zero-drift CMOS precision operational amplifier OPA333A-EP — Enhanced-product, micropower, 1.8-V, 17-µA zero-drift CMOS precision operational amplifier OPA334 — Single 0.05uV/C max, single-supply CMOS operational amplifier with shutdown OPA335 — Single 0.05uV/C max, single-supply CMOS operational amplifier OPA336 — Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier™ Series OPA336-EP — Enhanced Product Single-Supply, Micropower Cmos Operational Amplifiers Microamplifier(Tm) OPA340 — Single, single-supply, rail-to-rail, low power operational amplifier OPA340-EP — Enhanced Product Single-Supply, Rail-to-Rail Operational Amplifiers MicroAmplifier™ Series OPA350 — Single, single-supply, rail-to-rail, high speed, low noise operational amplifier OPA369 — Single, 1.8-V, 700-nA, zero-crossover rail-to-rail I/O operational amplifier OPA37 — Ultra-low-noise (4.5-nV/√Hz), 100-µV offset, decompensated precision operational amplifier OPA376 — Precision (0.025mV), low noise (7.5nV/rtHz), low quiescent current (760uA) op amp OPA376-Q1 — Automotive Precision, Low Noise, Low Iq Operational Amplifier OPA377 — Low-cost, low-noise, 5.5-MHz CMOS operational amplifier OPA377-Q1 — Automotive Qualified, Low Noise, Low Voltage, Precision Operational Amplifier OPA378 — Low-noise, 900-kHz, RRIO, precision operational amplifier, zero-drift series OPA381 — Precision, Low Power, High-Speed Transimpedance Amplifier OPA383 — Single, zero-drift, micropower (65μA), high speed-to-power ratio (2.5MHz) RRIO operational amplifier OPA387 — Ultra-high precision (2 µV), zero-drift (0.003 µV/C), low-input-bias-current op amp (single) OPA388 — Single, 10-MHz, CMOS, zero-drift, zero-crossover, true RRIO precision operational amplifier OPA388-Q1 — Automotive qualified, wide bandwidth, zero drift, zero cross over, precision amplifier OPA391 — Micropower, single, high-precision low-bias-current RRIO op amp with high speed-to-power ratio OPA392 — Single, low-offset (10 μV), low-noise (4.4 nV/rtHz @10kHz) femtoamp-bias-current e-trim™ op amp OPA396 — Single, micropower (24 μA), low-offset (100 μV), high speed-to-power ratio RRIO op amp OPA397 — Single, low-offset (60 µV), low-noise, low-bias-current RRIO e-trim™ operational amplifier OPA3S328 — High-speed (40 MHz) high-precision (60 µV) low-noise op amp with integrated gain switches OPA404 — Quad High Speed Precision Difet® Operational Amplifier OPA4140 — Quad-channel, 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output OPA4180 — 0.1 uV/C Drift, Quad, Low Noise, Rail-to-Rail, 36V Zero Drift Op Amp OPA4182 — 36-V, 5-MHz, quad, low-noise, zero-drift, MUX-friendly, precision op amp OPA4186 — Quad, 24-V, low-power (90 μA) 5-μV-offset zero-drift op amp with rail-to-rail input and output OPA4187 — Zero-drift (10µV, 0.001µV/C˚), MUX-friendly, low power, RRO, CMOS quad precision op amp (quad) OPA4188 — 0.03µV/C, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier OPA4189 — Quad, 14-MHz, MUX-friendly, zero-drift, rail-to-rail-output, precision operational amplifier OPA4191 — Quad, low-power, 36-V, precision, e-trim amplifier with RRIO OPA4192 — Low-Noise, Low Quiescent Current, 36V RRI/O Precision Op Amps, E-Trim™ Series OPA4196 — Quad, 36-V, low power, all-purpose amplifier with mux-friendly input OPA4197 — Quad, 36-V, precision, rail-to-rail input output, low offset voltage op amp OPA4197-Q1 — Automotive, quad channel, high precision, 36-V, 10-MHz, rail-to-rail input output op amp OPA4202 — Low-noise (0.2 µVPP, 9 nV/√Hz), heavy-capacitive-drive (25 nF) quad super-beta precision op amp OPA4205 — Quad, rail-to-rail bipolar precision e-trim™ op amp with low input bias current and low noise OPA4206 — Input-overvoltage-protected, low-power, low-noise four-channel op amp with super-beta inputs OPA4209 — Quad, 2.2-nV/rtHz, 18-MHz, precision, RRO, 36-V operational amplifier OPA4227 — Quad high precision, low noise operational amplifiers OPA4228 — Quad high precision, wide bandwidth, low noise operational amplifiers OPA4241 — Quad, 5V single-supply, micro power operational amplifiers OPA4251 — Quad, 15V single-supply, micro power operational amplifiers OPA4277 — Quad, low-offset (10 µV), precision op amp OPA4277-EP — Enhanced Products High Precision Operational Amplifiers OPA4277-SP — High-precision operational amplifier OPA4317 — Quad, Low Offset, Rail-to-Rail I/O Operational Amplifier OPA4325 — Low noise (10nV/rtHz), wide bandwidth (10MHz), low power (0.65mA), quad zero crossover op amp OPA4328 — Quad-channel, precision, 50µV offset voltage, 40MHz wide-bandwidth RRIO CMOS operational amplifier OPA4330 — Quad, 1.8-V, 35-µA, micropower, precision, zero drift CMOS op amp OPA4336 — Quad Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier™ Series OPA4340 — Quad, single-supply, rail-to-rail, low power operational amplifier OPA4350 — Quad, single-supply, rail-to-rail, high speed, low noise operational amplifier OPA4376 — Quad precision, low-noise, low quiescent current operational amplifier OPA4376-Q1 — Automotive-Qualified Precision Op Amp With E-Trim, Low Quiescent Current and Low Noise OPA4377 — Quad low-cost, low-noise, 5.5-MHz CMOS operational amplifier OPA4377-Q1 — Automotive-Qualified CMOS Operational Amplifier With Low Noise and 5.5MHz GBW OPA4383 — Quad, zero-drift, micropower (65μA), high speed-to-power ratio (2.5MHz) RRIO operational amplifier OPA4387 — Ultra-high precision (2 μV), zero-drift (0.003 μV/C), low-input-bias-current op amp (quad) OPA4388 — Quad, 10-MHz, CMOS, zero-drift, zero-crossover, true RRIO precision operational amplifier OPA4391 — Quad, micropower, high speed-to-power ratio, low-bias-current RRIO precision operational amplifier OPA4392 — Quad, low-offset (10 μV), low-noise (6 nV/rtHz) femtoampere-bias-current e-trim™ op amp OPA4397 — Quad, low-offset (60 μV), low-noise, low-bias-current RRIO e-trim™ operational amplifier OPA4727 — e-trim™ 20MHz, High Precision CMOS Operational Amplifier OPA4H014-SEP — Radiation-tolerant, 11-MHz, low-noise, precision rail-to-rail output JFET amplifier OPA4H838-SEP — Radiation-tolerant 10MHz, zero-drift, zero-crossover, RRIO precision operational amplifier OPA593 — 85-V, 100-µV wide-bandwidth (10 MHz) high-output-current (250 mA) precision operational amplifier OPA627 — 55V/µs high-speed 0.8µV/˚C max drift precision operational amplifier OPA637 — Precision High-Speed Difet® Operational Amplifiers OPA727 — Single high precision, low noise operational amplifiers OPA728 — 20-MHz, 2.5-fA/√Hz noise, high precision operational amplifiers OPA734 — Single 0.05-uV/degC (max) single-supply CMOS op amp, zero-drift series with shutdown OPA735 — Single 0.05uV/degC (max) single-supply CMOS operational amplifier, zero-drift series OPA827 — Low-noise, high-precision, JFET-input operational amplifier OPA828 — High-speed (45 MHz and 150 V/μs), 36-V, low-noise (4 nV/√Hz) RRO JFET operational amplifier OPA928 — High-voltage femtoampere-input-bias precision e-trim™ operational amplifier with RRIO
General-purpose op amps
OPA137 — Single, 36-V, 1-MHz operational amplifier with rail-to-rail input to V+ OPA141 — Single, 10-MHz, single supply, low-noise, JFET precision amplifier OPA170 — Single, 36-V, 1.2-MHz, low-power operational amplifier OPA170-EP — Enhanced product, single, 36-V, 1.2-MHz, low-power operational amplifier OPA170-Q1 — Automotive-grade, single, 36-V, 1.2-MHz, low-power operational amplifier OPA171 — Single, 36-V, 3-MHz, low-power operational amplifier OPA171-Q1 — Automotive-grade, single, 36-V, 3-MHz, low-power operational amplifier OPA172 — Single, 36-V, 10-MHz, low-power operational amplifier OPA2107 — Dual, 30-V, 4.5-MHz operational amplifier OPA2137 — Dual, 36-V, 1-MHz operational amplifier OPA2141 — Dual, 10-MHz, single supply, low-noise, JFET precision amplifier OPA2170 — Dual, 36-V, 1.2-MHz, low-power operational amplifier OPA2170-Q1 — Automotive-grade, dual, 36-V, 1.2-MHz, low-power operational amplifier OPA2171 — Dual, 36-V, 3-MHz, low-power operational amplifier OPA2171-EP — Enhanced product, dual, 36-V, 3-MHz, low-power operational amplifier OPA2171-Q1 — Automotive-grade, dual, 36-V, 3-MHz, low-power operational amplifier OPA2172 — Dual, 36-V, 10-MHz, low-power operational amplifier OPA2172-Q1 — Automotive-grade, dual, 36-V, 10-MHz, low-power operational amplifier OPA2244 — Dual, 36-V, 430-kHz, low-power operational amplifier OPA2310 — Dual-channel, 5.5-V, 3-MHz high-output-current (150-mA) fast-shutdown (1-μs) operational amplifier OPA2313 — Dual, 5.5-V, 1-MHz, low quiescent current (50-μA), RRIO operational amplifier OPA2313-Q1 — Automotive-grade, dual, 5.5-V, 1-MHz, low quiescent current (50-μA), RRIO operational amplifier OPA2314 — Dual, 5.5-V, 3-MHz, 1.8-V min supply, low noise (14-nV/√Hz) operational amplifier OPA2314-EP — Enhanced product, dual, 5.5-V, 3-MHz, RRIO operational amplifier OPA2314-Q1 — Automotive-grade, dual, 5.5-V, 3-MHz, 1.8-V min supply, low noise (14-nV/√Hz) operational amplifier OPA2316 — Dual, 5.5-V, 10-MHz, low noise (11-nV/√Hz), RRIO operational amplifier OPA2316-Q1 — Automotive-grade, dual, 5.5-V, 10-MHz, low noise (11-nV/√Hz), RRIO operational amplifier OPA2322 — Dual, 5.5-V, 20-MHz, low noise (8.5-nV/√Hz), RRIO operational amplifier OPA2322-Q1 — Automotive-grade, dual, 5.5-V, 20-MHz, low noise (8.5-nV/√Hz), RRIO operational amplifier OPA2323 — Dual, 5.5V, 20MHz, zero-cross low-noise (6nV/√Hz) RRIO operational amplifier OPA2337 — Dual, 5.5-V, 3-MHz, RRO operational amplifier OPA2338 — Dual, 5.5-V, 12.5-MHz, RRO operational amplifier OPA2341 — Dual, 5.5-V, 5.5-MHz, RRIO operational amplifier with shutdown OPA2342 — Dual, 5.5-V, 1-MHz, low bias current (0.2-pA), RRIO operational amplifier OPA2343 — Dual, 5.5-V, 5.5-MHz, RRIO operational amplifier OPA2344 — Dual, 5.5-V, 1-MHz, 1-mV offset, RRIO operational amplifier OPA2345 — Dual, 5.5-V, 3-MHz, 1-mV offset, RRIO operational amplifier OPA2347 — Dual, 5.5-V, 350-kHz, low quiescent current (20-μA), RRIO operational amplifier OPA2348 — Dual, 5.5-V, 1-MHz, low quiescent current (45-μA), RRIO operational amplifier OPA2348-Q1 — Automotive-grade, dual, 5.5-V, 1-MHz, low quiescent current (45-μA), RRIO operational amplifier OPA2349 — Dual, 5.5-V, 70-kHz, low quiescent current (1-μA), RRIO operational amplifier OPA2353 — Dual, 5.5-V, 44-MHz, low noise (7-nV/√Hz), RRIO operational amplifier OPA2363 — Dual, 5.5-V, 7-MHz, RRIO operational amplifier with shutdown OPA2364 — Dual, 5.5-V, 7-MHz, RRIO operational amplifier OPA2373 — Dual, 5.5-V, 6.5-MHz, RRIO operational amplifier with shutdown OPA2374 — Dual, 5.5-V, 6.5-MHz, RRIO operational amplifier OPA2375 — Dual, 5.5-V, 10-MHz, low noise (4.6-nV/√Hz), RRO operational amplifier OPA2379 — Dual, 5.5-V, 90-kHz, low quiescent current (2.9-μA), RRIO operational amplifier OPA244 — Single, 36-V, 430-kHz, low-power operational amplifier OPA2703 — Dual, 12-V, 1-MHz operational amplifier OPA2704 — Dual, 12-V, 3-MHz operational amplifier OPA2705 — Dual, 12-V, 1-MHz, low-power, low-offset operational amplifier OPA2725 — Dual, 12-V, 20-MHz, low-power, low-offset operational amplifier OPA2726 — Dual, 12-V, 20-MHz, low-power operational amplifier OPA2743 — Dual, 12-V, 7-MHz operational amplifier OPA2990 — Dual, 40-V, 1.1-MHz, low-power operational amplifier OPA2991 — Dual, 40-V, 4.5-MHz, low-power operational amplifier OPA2991-Q1 — Automotive, dual, 40-V 4.5-MHz low-power operational amplifier OPA2992 — Dual, 40V, 10.6MHz, rail-to-rail input and output low-offset-voltage low-noise op amp OPA2992-Q1 — Automotive, dual, 40V, 10MHz rail-to-rail input and output low-noise operational amplifier OPA2994 — Dual, 32V, 24MHz RRIO high-output-current (125mA) op amp with unlimited capacitance load drive OPA2994-Q1 — Automotive, dual, 32V 25MHz high-output-current (150 mA) operational amplifier OPA310 — Single, 5.5-V, 3-MHz high-output-current (150 mA) fast-shutdown (1 μs) operational amplifier OPA310-Q1 — Automotive, single, 5.5-V, 3-MHz high-output-current (150 mA) fast-shutdown operational amplifier OPA313 — Single, 5.5-V, 1-MHz, low quiescent current (50-μA), RRIO operational amplifier OPA314 — Single, 5.5-V, 3-MHz, low noise (4.6-nV/√Hz), RRIO operational amplifier OPA314-Q1 — Automotive-grade, single, 5.5-V, 3-MHz, low noise (4.6-nV/√Hz), RRIO operational amplifier OPA316 — Single, 5.5-V, 10-MHz, 50-mA output current, low noise (11-nV/√Hz), RRIO operational amplifier OPA316-Q1 — Automotive-grade, single, 5.5-V, 10-MHz, 50-mA output current, low noise (11-nV/√Hz), RRIO op amp OPA322 — Single, 5.5-V, 20-MHz, 65-mA output current, low noise (8.5-nV/√Hz) operational amplifier OPA322-Q1 — Automotive-grade, single, 5.5-V, 20-MHz, 65-mA output current, low noise (8.5-nV/√Hz) op amp OPA323 — Single, 5.5V, 20MHz, zero-cross low-noise (6nV/√Hz) RRIO operational amplifier OPA337 — Single, 5.5-V, 3-MHz, RRO operational amplifier OPA338 — Single, 5.5-V, 62.5-MHz, RRO operational amplifier OPA341 — Single, 5.5-V, 5.5-MHz, extended temp, RRIO operational amplifier with shutdown OPA342 — Single, 5.5-V, 1-MHz, low bias current (0.2-pA), RRIO operational amplifier OPA343 — Single, 5.5-V, 5.5-MHz, RRIO operational amplifier OPA344 — Single, 5.5-V, 1-MHz, 1-mV offset, RRIO operational amplifier OPA345 — Single, 5.5-V, 3-MHz, RRIO operational amplifier OPA347 — Single, 5.5-V, 350-kHz, low quiescent current (20-μA), RRIO operational amplifier OPA348 — Single, 5.5-V, 1-MHz, low quiescent current (45-μA), RRIO operational amplifier OPA348-Q1 — Automotive-grade, single, 5.5-V, 1-MHz, low quiescent current (45-μA), RRIO operational amplifier OPA349 — Single, 5.5-V, 70-kHz, low quiescent current (1-μA), RRIO operational amplifier OPA353 — Single, 5.5-V, 44-MHz, low noise (7-nV/√Hz), RRIO operational amplifier OPA363 — Single, 5.5-V, 7-MHz, RRIO operational amplifier with shutdown OPA364 — Single, 5.5-V, 7-MHz, RRIO operational amplifier OPA373 — Single, 5.5-V, 6.5-MHz, RRIO operational amplifier with shutdown OPA374 — Single, 5.5-V, 6.5-MHz, RRIO operational amplifier OPA375 — OPAx375, 500uV, 10-MHz, Low Broadband Noise, RRO, Operational Amplifier OPA379 — Single, 5.5-V, 90-kHz, low quiescent current (2.9-μA), RRIO operational amplifier OPA4130 — Quad, low bias current, low-noise, precision difet operational amplifier OPA4131 — Quad, 1-MHz, 20-pA bias current, 530-µA power, FET operational amplifier OPA4137 — Quad, 36-V, 1-MHz, RRI operational amplifier OPA4141 — Quad, 10-MHz, single supply, low-noise, JFET precision amplifier OPA4170 — Quad, 36-V, 1.2-MHz, low-power operational amplifier OPA4170-Q1 — Automotive-grade, quad, 36-V, 1.2-MHz, low-power operational amplifier OPA4171 — Quad, 36-V, 3-MHz, low-power operational amplifier OPA4171-Q1 — Automotive-grade, quad, 36-V, 3-MHz, low-power operational amplifier OPA4172 — Quad, 36-V, 10-MHz, low-power operational amplifier OPA4172-Q1 — Automotive-grade, quad, 36-V, 10-MHz, low-power operational amplifier OPA4243 — Quad, 36-V, 430-kHz operational amplifier OPA4244 — Quad, 36-V, 430-kHz, low-offset operational amplifier OPA4310 — Quad, 5.5-V, 3-MHz high-output-current (150 mA) fast-shutdown (1 μs) operational amplifier OPA4313 — Quad, 5.5-V, 1-MHz, low quiescent current (50-μA), RRIO operational amplifier OPA4314 — Quad, 5.5-V, 3-MHz, low noise (4.6-nV/√Hz), RRIO operational amplifier OPA4314-Q1 — Automotive-grade, quad, 5.5-V, 3-MHz, low noise (4.6-nV/√Hz), RRIO operational amplifier OPA4316 — Quad, 5.5-V, 10-MHz, 50-mA output current, low noise (11-nV/√Hz), RRIO operational amplifier OPA4316-Q1 — Automotive-grade, quad, 5.5-V, 10-MHz, 50-mA output current, low noise (11-nV/√Hz), RRIO op amp OPA4322 — Quad, 5.5-V, 20-MHz, 65-mA output current, low noise (8.5-nV/√Hz), RRIO operational amplifier OPA4322-Q1 — Automotive-grade, quad, 5.5-V, 20-MHz, 65-mA output current, low noise (8.5-nV/√Hz), RRIO op amp OPA4323 — Quad, 5.5-V, 20-MHz, zero-cross low-noise (6 nV/√Hz) RRIO operational amplifier OPA4342 — Quad, 5.5-V, 1-MHz, low bias current (0.2-pA), RRIO operational amplifier OPA4343 — Quad, 5.5-V, 5.5-MHz, RRIO operational amplifier OPA4344 — Quad, 5.5-V, 1-MHz, 1-mV offset, RRIO operational amplifier OPA4345 — Quad, 5.5-V, 3-MHz, 1-mV offset, RRIO operational amplifier OPA4347 — Quad, 5.5-V, 350-kHz, low quiescent current (20-μA), RRIO operational amplifier OPA4348 — Quad, 5.5-V, 1-MHz, low quiescent current (45-μA), RRIO operational amplifier OPA4348-Q1 — Automotive-grade, quad, 5.5-V, 1-MHz, low quiescent current (45-μA), RRIO operational amplifier OPA4353 — Quad, 5.5-V, 44-MHz, low noise (7-nV/√Hz) operational amplifier OPA4364 — Quad, 5.5-V, 7-MHz, RRIO operational amplifier OPA4364-Q1 — Automotive-grade, quad, 5.5-V, 7-MHz, RRIO operational amplifier OPA4374 — Quad, 5.5-V, 6.5-MHz, RRIO operational amplifier OPA4379 — Quad, 5.5-V, 90-kHz, low quiescent current (2.9-μA), RRIO operational amplifier OPA4703 — Quad, 12-V, 1-MHz, low-offset operational amplifier OPA4704 — Quad, 12-V, 3-MHz operational amplifier OPA4705 — Quad, 12-V, 1-MHz operational amplifier OPA4743 — Quad, 12-V, 7-MHz operational amplifier OPA4990 — Quad, 40-V 1.1-MHz low-power (0.12 mA) operational amplifier OPA4990-Q1 — Automotive, quad, 40-V 1.1-MHz low-power (0.12 mA) operational amplifier OPA4991 — Quad, 40-V, 4.5-MHz, low-power operational amplifier OPA4991-EP — Enhanced-product, quad, 40-V 4.5-MHz rail-to-rail input and output operational amplifier OPA4991-Q1 — Automotive, quad, 40-V, 4.5-MHz, low-power operational amplifier OPA4992 — Quad, 40-V, 10.6-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp OPA4992-Q1 — Automotive, quad, 40-V, 10.6-MHz, rail-to-rail input and output low-offset-voltage low-noise op amp OPA4H199-SEP — Space-enhanced-product, quad, 40-V 4.5-MHz rail-to-rail input and output operational amplifier OPA4H199-SP — Space-grade, quad, 40V 4.5MHz rail-to-rail input and output operational amplifier OPA602 — High-Speed Precision Difet® Operational Amplifier OPA703 — Single, 12-V, 1-MHz, low-offset operational amplifier OPA704 — Single, 12-V, 3-MHz operational amplifier OPA705 — Single, 12-V, 1-MHz operational amplifier OPA725 — Single, 12-V, 20-MHz operational amplifier OPA726 — Single, 12-V, 20-MHz operational amplifier with shutdown OPA743 — Single, 12-V, 7-MHz operational amplifier OPA990 — Single, 40-V, 1.1-MHz, low-power operational amplifier OPA991 — Single, 40-V 4.5-MHz low-power operational amplifier OPA991-Q1 — Automotive, single, 40-V 4.5-MHz low-power operational amplifier OPA992 — Single, 40-V, 10.6-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp OPA992-Q1 — Automotive, single, 40-V, 10-MHz rail-to-rail input and output low-noise operational amplifier OPA994 — Single, 32V, 24MHz RRIO high-output-current (125mA) op amp with unlimited capacitance load drive OPA994-Q1 — Automotive, single-channel, 32V, 25MHz high-output-current (150 mA) operational amplifier
Audio op amps
OPA132 — Single SoundPlus™ 8-MHz, 5-pA, High Performance Audio Operational Amplifiers with FET inputs OPA134 — Single SoundPlus™ 8-MHz, 50-pA, high-performance audio op amp with FET inputs OPA1602 — Dual, SoundPlus™ high-performance, bipolar-input audio op amp OPA1604 — Quad, SoundPlus High-Performance, Bipolar-Input Audio Op Amp OPA1611 — 1.1nV/√Hz Noise, Low Power, Precision Operational Amplifier OPA1612 — SoundPlus™ Audio Operational Amplifier with 1.1nV/√Hz Noise, Low THD and Precision OPA1612-Q1 — Automotive, 1.1nV/√Hz Noise, Low Power, Precision Audio Operational Amplifier OPA1622 — SoundPlus™ Audio Operational Amplifier with High Performance, Low THD+N and Bipolar Input OPA1632 — Fully Differential I/O Audio Amplifier OPA1633 — Ultra-low-distortion 195-MHz fully-differential audio amplifier OPA1637 — High-fidelity, high-voltage (36-V), low-noise (3.7-nV/rtHz) Burr-Brown™ audio fully-differential amp OPA1641 — Single Sound-Plus High-Performance, JFET-Input Audio OpAmps OPA1641-Q1 — Single Automotive Sound-Plus High-Performance, JFET-Input Audio Op Amps OPA1642 — Dual SoundPlus™ high-performance, JFET-input audio op amp OPA1642-Q1 — Dual automotive soundplus™ high-performance, JFET-input audio op amps OPA1644 — OPA1641/1642/1644 SoundPLUS™ High-Performance, JFET-Input Audio OpAmps OPA1652 — Dual SoundPlus™ low-noise & distortion, general-purpose, FET-input audio op amp OPA1654 — Quad sound plus low noise and distortion, general-purpose, FET-input audio op amps OPA1655 — SoundPlus™ ultra-low noise and distortion, Burr-Brown™ single audio operational amplifier OPA1656 — SoundPlus™ ultra-low noise and distortion, Burr-Brown™ audio operational amplifier OPA1662 — Dual SoundPlus™ low noise (3.3nV/rtHz) and distortion (-124dB), wide bandwidth (22MHz) audio op amp OPA1662-Q1 — Automotive Sound Plus, Low-Power, Low-Noise and Distortion, Audio Op Amp OPA1664 — Quad sound plus low-power, low-noise and distortion, audio op amps OPA1671 — Single supply, wide bandwidth (13MHz), low noise (7nV/RtHz), RRIO audio op amp OPA1677 — Low-distortion (-120 dB) low-noise (4.5 nV/rtHz) single audio operational amplifier OPA1678 — Low distortion (-120 dB), low noise (4.5nV/rtHz), dual audio op amp OPA1679 — Low distortion (-120 dB), low noise (4.5nV/rtHz), quad audio op amp OPA1679-Q1 — Automotive quad-channel, low-noise 4.5-nV/rtHz, low-distortion 120-dB, audio operational amplifier OPA1688 — 36V, 10MHz, Low Distortion High Drive Rail-to-Rail Output Audio Operational Amplifiers OPA1692 — SoundPlus™ Low-Power, Low-Noise, High-Performance Dual Bipolar-Input Audio Op Amp OPA2132 — Dual, SoundPlus™ 8-MHz, 5-pA, High Performance Audio Operational Amplifiers with FET inputs OPA2134 — SoundPlus™ Audio Operational Amplifier with Low Distortion, Low Noise and Precision OPA4132 — Quad, 4-MHz, 50-pA bias current, 750-µA power, FET operational amplifier OPA4134 — Quad SoundPlus™ High Performance Audio Operational Amplifiers OPA604 — FET-Input, Audio Operational Amplifier
Transimpedance amplifiers
OPA1S2384 — 250-MHz, CMOS Transimpedance Amplifier (TIA) with Integrated Switch and Buffer OPA1S2385 — 250-MHz, CMOS Transimpedance Amplifier (TIA) with Integrated active low Switch and Buffer OPA2380 — OPA2380 - Dual, High-Speed Precision Transimpedance Amplifier OPA380 — Single, High-Speed Precision Transimpedance Amplifier OPA3S2859 — Dual-channel, 900-MHz 2.2-nV/√Hz programmable-gain transimpedance amplifier OPA3S2859-EP — Enhanced product, dual-channel, 900-MHz, 2.2-nV/√Hz, programmable gain transimpedance amplifier OPA857 — Ultralow-Noise, Wideband, Pseudo-Differential Output Transimpedance Amplifier OPA857-DIE — Low-Noise, Wideband, Selectable-gain, Transimpedance Amp
High-speed op amps (GBW ≥ 50 MHz)
OPA2300 — Low-Noise, High-Speed, 16-Bit Accurate CMOS Operational Amplifier with digital shutdown OPA2301 — Low-Noise, High-Speed, 16-Bit Accurate CMOS Operational Amplifier OPA2354 — 250MHz, Rail-to-Rail I/O, CMOS Dual Operational Amplifier OPA2354A-Q1 — Automotive 250MHz, Rail-to-Rail I/O, CMOS Dual Operational Amplifier OPA2355 — 2.5V, 200MHz GBW, CMOS Dual Op Amp With Shutdown OPA2356 — 2.5V, 200MHz GBW, CMOS Dual Op Amp OPA2356-EP — Enhanced product 2.5 V, 200 MHz GBW, CMOS dual op amp OPA2357 — 250MHz, Rail-to-Rail I/O, Dual CMOS Operational Amplifier w/Shutdown OPA2365 — 2.2V, 50MHz, Low-Noise Single-Supply Rail-to-Rail Operational Amplifiers OPA2365-Q1 — Automotive 2.2V, 50MHz, Low-Noise Single-Supply Rail-to-Rail Operational Amplifiers OPA2607 — Dual-channel, low-power, precision, 50-MHz decompensated CMOS op amp OPA2607-Q1 — Automotive, dual-channel, 50-MHz decompensated rail-to-rail output CMOS op amp OPA2613 — Dual Wideband, High-Output Current, Operational Amplifier with Current Limit OPA2614 — Dual, High Gain Bandwidth, High Output Current, Operational Amplifier with Current Limit OPA2625 — High-Bandwidth, High-Precision, Low THD+N, 16-Bit and 18-Bit ADC Drivers with shutdown OPA2626 — High-Bandwidth, High-Precision, Low THD+N, 16-Bit and 18-Bit ADC Drivers OPA2652 — SpeedPlus™ Dual, 700MHz, Voltage-Feedback Operational Amplifier OPA2673 — Dual, Wideband, High Output Current Amplifier and PLC Line Driver with Active Off-line Control OPA2674 — Dual, Wideband, High Output Current Amplifier and DSL/PLC Line Driver with Current Limit OPA2675 — Dual-channel, wideband high-power-output current-feedback amplifier OPA2677 — SpeedPlus™ Dual, Wideband, High Output Current Operational Amplifier and DSL/PLC Line Driver OPA2683 — Very-low-power dual-current feedback operational amplifier OPA2684 — Dual, Low Power, Current Feedback Operational Amplifier OPA2690 — Dual Wideband, Voltage Feedback Operational Amplifier with Disable OPA2691 — Dual wideband current feedback operational amplifier with disable OPA2694 — Dual, Wideband, Low Power, Current Feedback Operational Amplifier OPA2695 — Ultra-Wideband, Current-Feedback Operational Amplifier with Disable OPA2810 — Dual channel, high performance, 27 V, 105 MHz, RRIO FET input op amp OPA2822 — Dual, wideband low-noise SpeedPlus™ operational amplifier OPA2830 — Dual, Low-Power, Single-Supply Wideband Operational Amplifier OPA2832 — Dual, Low Power, High-Speed , Fixed Gain Operational Amplifier OPA2834 — Ultra-low power, 50MHz rail-to-rail out, negative rail in, voltage-feedback op amp OPA2835 — Dual, Ultra Low Power, Rail to Rail Out, Negative Rail In, VFB Amplifier OPA2836 — Dual, Very Low Power, Rail to Rail out, Negative Rail in, VFB Op Amp OPA2836-Q1 — Automotive, Dual, Very Low Power, Rail to Rail output, VFB Op Amp OPA2837 — Dual, Low-Power, Precision, Rail-to-Rail Output, 105MHz, Voltage Feedback Amplifier OPA2846 — Dual, Wideband, Low-Noise, Voltage-Feedback Operational Amplifier OPA2863 — Dual, low-power, 110-MHz, 12-V, rail-to-rail input and output (RRIO) voltage-feedback amplifier OPA2863-Q1 — Automotive, dual, low-power, 110-MHz, 12-V RRIO voltage-feedback amplifier OPA2863A — Dual, high-precision, low-power, 105MHz, 12V RRIO voltage-feedback amplifier OPA2889 — Dual 115MHz, Low Power, Wideband, Voltage Feedback Operational Amplifier with Disable OPA2890 — Dual 250MHz , Low Power, Wideband, Voltage Feedback Operational Amplifier with Disable OPA2891 — Dual-channel 180MHz 0.95nV√Hz operational amplifier with ultra-low total harmonic distortion (THD) OPA2892 — Dual-channel, 2GHz, 10V/V stable 0.95nV√Hz op amp with ultra-low total harmonic distortion (THD) OPA300 — High Speed, Low Noise, Single Supply CMOS Operational Amplifier OPA301 — Low-Noise, High-Speed,16-Bit Accurate CMOS Operational Amplifier OPA3355 — 2.5V, 200MHz GBW, CMOS Triple Op Amp With Shutdown OPA354 — 250MHz, Rail-to-Rail I/O, CMOS Single Operational Amplifier OPA354A-Q1 — Automotive 250MHz, Rail-to-Rail I/O, CMOS Single Operational Amplifier OPA355 — 2.5V, 200MHz GBW, CMOS Single Op Amp With Shutdown OPA355-Q1 — Automotive 2.5V, 200MHz GBW, CMOS Single Op Amp With Shutdown OPA356 — 2.5V, 200MHz GBW, CMOS Single Op Amp OPA356-Q1 — Automotive Catalog 2.5V, 200MHz GBW, CMOS Single Op Amp OPA357 — 250MHz, Rail-to-Rail I/O, Single CMOS Operational Amplifier w/Shutdown OPA358 — 3V Single Supply 80MHz High-Speed Op Amp in SC70 OPA365 — 2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Operational Amplifier OPA365-EP — Enhanced Product 2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Op Amp OPA365-Q1 — Automotive 2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Operational Amplifier OPA3684 — Low-Power, Triple Current Feedback Operational Amplifier with Disable OPA3690 — Triple, Wideband, Voltage-Feedback Operational Amplifier with Disable OPA3691 — Triple Wideband Current Feedback Operational Amplifier with Disable OPA3695 — Ultra-Wideband, Current-Feedback Operational Amplifier with Disable OPA3832 — 250MHz triple, low-power, high-speed, fixed-gain operational amplifier OPA4354 — 250 MHz, rail-to-rail I/O, CMOS quad operational amplifier OPA4354-Q1 — Automotive, 250MHz, Rail-to-Rail I/O, CMOS Quad Operational Amplifier OPA4684 — Quad, Low-Power, Current Feedback Operational Amplifier OPA4684M — Military Quad, Low-Power, Current Feedback Operational Amplifier OPA4820 — Quad, Unity-Gain, Low-Noise, Voltage-Feedback Operational Amplifier OPA4830 — Quad, Low-Power, Single-Supply, Wideband Operational Amplifier OPA4863 — Quad, low-power, 110-MHz RRIO voltage-feedback amplifier OPA4872-EP — Enhanced Product 4:1 High-Speed Multiplexer OPA607 — Low power, precision, 50 MHz decompensated CMOS operational amplifier for cost sensitive systems OPA607-Q1 — Automotive, 50-MHz, low-power, gain of 6-V/V stable, rail-to-rail output CMOS operational amplifier OPA625 — High Bandwidth, High Precision, Low Noise & Distortion Amplifier SAR ADC Driver with Power Scaling OPA653 — 500MHz, Fixed Gain of +2V/V, JFET input amplifier OPA656 — Wideband, Unity Gain Stable FET-Input Operational Amplifier OPA657 — 1.6GHz, Low Noise, FET-Input Operational Amplifier OPA657-DIE — Bare-DIE 1.6-GHz, Low-Noise, FET-Input Operational Amplifier OPA659 — 650MHz unity gain stable JFET input amplifier OPA683 — Very-low-power current-feedback amplifier with disable OPA684 — Low-Power, Current Feedback Operational Amplifier With Disable OPA688M — Military Speedplus unity gain stable, wideband voltage limiting amplifier OPA689M — Military wideband, high gain voltage limiting amplifier OPA690 — Wideband voltage-feedback operational amplifier with disable OPA691 — Wideband Current Feedback Operational Amplifier with Disable OPA692 — Wideband, Fixed Gain Buffer Amplifier with Disable OPA694 — WideBand, Low-Power, Current Feedback Amplifier OPA695 — Ultra-Wideband, Current-Feedback Operational Amplifier with Disable OPA698 — Unity Gain Stable, Wideband Voltage Limiting Amplifier OPA698M — Unity-Gain-Stable Wideband Voltage Limiting Amplifier OPA699 — OPA699: Wideband, High Gain Voltage Limiting Amplifier OPA699M — Gain +4 Stable Wideband Voltage Limiting Amplifier OPA810 — 27V, 140MHz, single channel, high performance, RRIO FET input op amp OPA810-Q1 — Automotive, 27V, 140MHz, single channel, high performance, RRIO FET input op amp OPA814 — 600-MHz, high-precision unity-gain-stable FET-input operational amplifier OPA817 — 800-MHz, high-precision unity-gain-stable FET-input operational amplifier OPA818 — 2.7-GHz, 13-V, decompensated 7-V/V, FET-input operational amplifier OPA820 — Unity gain stable, low-noise, voltage feedback operational amplifier OPA830 — Low-Power, Single-Supply Operational Amplifier OPA830-EP — Low-Power, Single-Supply, Wideband Operational Amplifier OPA832 — Low-Power, Single-Supply, Fixed-Gain Video Buffer Amplifier OPA835 — Ultra Low Power, Rail to Rail Out, Negative Rail In, VFB Amplifier OPA836 — Very Low Power, Rail to Rail out, Negative Rail in, VFB Op Amp OPA837 — Low-power, precision 105-MHz voltage-feedback operational amplifier OPA838 — 1mA, 300MHz gain bandwidth, voltage-feedback operational amplifier OPA842 — Wideband, Low Distortion, Unity Gain Stable, Voltage Feedback Operational Amplifier OPA843 — Wideband, Low Distortion, Medium Gain, Voltage Feedback Operational Amplifier OPA846 — Wideband low-noise voltage-feedback operational amplifier OPA847 — Wideband, ultra-low noise, voltage feedback operational amplifier with shutdown OPA855 — 8 GHz Gain Bandwidth Product, Decompensated Transimpedance Amplifier with Bipolar Input OPA855-Q1 — Automotive 8-GHz gain bandwidth, decompensated transimpedance amplifier with bipolar input OPA856 — 1.1-GHz unity-gain bandwidth, 0.9 nV/√Hz, bipolar input amplifier OPA858 — 5.5 GHz Gain Bandwidth Product, Decompensated Transimpedance Amplifier with FET Input OPA858-Q1 — Automotive 5.5-GHz gain bandwidth, decompensated transimpedance amplifier with FET input OPA859 — 1.8 GHz Unity-Gain Bandwidth, 3.3 nV/√Hz, FET Input Amplifier OPA859-Q1 — Automotive 1.8-GHz unity-gain bandwidth, 3.3-nV/√Hz, FET input amplifier OPA863 — Single-channel, low-power, 110-MHz, 12-V rail-to-rail input and output voltage-feedback amplifier OPA863A — Single-channel, high-precision, low-power, 105-MHz, 12-V RRIO voltage-feedback amplifier OPA890 — Low Power, Wideband, Voltage Feedback Operational Amplifier with Disable OPA891 — 180-MHz 0.95-nV√Hz operational amplifier with ultra-low total harmonic distortion (THD) OPA892 — 2-GHz 10-V/V stable 0.95-nV√Hz operational amplifier with ultra-low total harmonic distortion (THD)
Power op amps
OPA2541 — Dual High Power Operational Amplifier OPA2544 — High-Voltage, High-Current Dual Operational Amplifier OPA445 — High Voltage FET-Input Operational Amplifier OPA452 — 80-V, 50-mA, unity-gain stable with a BW of 1.8-MHz operational amplifiers OPA453 — 80-V, 50-mA optimized for gains greater than 5 with a BW of 7.5-MHz operational amplifiers OPA454 — High voltage (100 V), high-current (50 mA) operational amplifiers, g=1 stable OPA455 — 150-V, wide bandwidth 6.5-MHz, high-slew rate 32-V/µs unity-gain stable op amp OPA462 — 180-V, wide bandwidth (6.5 MHz), high-slew rate (25 V/µs) unity-gain stable op amp OPA521 — 2.5A Narrowband line driver OPA541 — High Power Monolithic Operational Amplifier OPA544 — High-Current (4A Typ), High-Voltage, Operational Amplifier OPA547 — High-Voltage, High-Current Op Amp with shutdown capability OPA548 — High-voltage, high-current, wide-output-voltage-swing power operational amplifier OPA549 — High-Voltage, High-Current Op Amp, Excellent Output Swing OPA549-HIREL — High-Voltage, High-Current Operational Amplifier OPA551 — High-current (380mA Typ), high-voltage (60V), operational amplifier OPA552 — High-current (380mA typ), high-voltage (60V), wide bandwidth (12MHz), operational amplifier OPA561 — High-current high-speed operational amplifier OPA564 — 1.5A, 24V, 17MHz, Power Operational Amplifier OPA564-Q1 — Automotive 1.5A, 24V, 17MHz, Power Operational Amplifier OPA567 — Rail-to-Rail I/O, 2A Power Amplifier OPA569 — Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current OPA596 — 85V high speed (100V/µs) to power (400µA) ratio precision op-amp in small package OPA598 — 85V, 100µV wide-bandwidth (10MHz) high-output-current (250mA) precision operational amplifier
Video amplifiers
OPA360 — 3V, Video Amplifier with Low Pass Filter, Internal G=2 and SAG Correction in SC70 OPA361 — 3V Video Amplifier with Internal Gain and Filter OPA361-Q1 — Automotive AEC-Q100 Grade 1 Qualified 3V Video Amplifier with Internal Gain and Filter OPA362 — 3V Video Amplifier with Internal Gain and Filter in SC70 OPA3692 — Triple, Wideband, Fixed Gain Video Buffer Amplifier With Disable OPA3693 — Triple, ultra-wideband, fixed-gain, video buffer with disable OPA3875 — Triple-channel, 700-MHz, op amp with 2:1 high-speed multiplexer OPA4872 — 12V, 500MHz high-speed op amp with 4:1 high-speed multiplexer OPA693 — Ultra-Wideband, Fixed Gain Video Buffer Amplifier with Disable OPA875 — Single-channel, 700-MHz, op amp with 2:1 high-speed multiplexer
Line drivers
OPA2670 — Single Port, High Output Current VDSL2 and PLC Line Driver with Power Control
Transconductance amplifiers & laser drivers
OPA615 — Wide Bandwidth, DC Restoration Circuit OPA860 — Wide Bandwidth Operational Transconductance Amplifier and Buffer OPA861 — Wide Bandwidth Operational Transconductance Amplifier
Fully differential amplifiers
OPA862 — 12.6V, Low-noise, single-ended-to-differential, high input impedance amplifier
Precision ADCs
ADS1000 — 12-Bit, 128SPS, 1-Ch Delta-Sigma ADC w/ PGA, Oscillator & I2C ADS1000-Q1 — Automotive, 12-Bit, 128SPS, 1-Ch Delta-Sigma ADC w/ PGA, Oscillator & I2C ADS1013 — 12-Bit 3.3kSPS 1-Ch Delta-Sigma ADC With Oscillator, Voltage Reference, and I2C ADS1013-Q1 — Automotive 12-Bit 3.3kSPS 1-Ch Delta-Sigma ADC With Oscillator, Voltage Reference, and I2C ADS1014 — 12-Bit 3.3kSPS 1-Ch Delta-Sigma ADC With PGA, Oscillator, Voltage Reference, Comparator, and I2C ADS1014-Q1 — Automotive 12-Bit 3.3kSPS 1-Ch Delta-Sigma ADC With PGA, Oscillator, VREF, Comparator, and I2C ADS1014L — 12-bit, 3.3-kSPS one-channel delta-sigma ADC with PGA, comparator and 1.8-V I²C bus voltage support ADS1015 — 12-bit, 3.3-kSPS, 4-channel, delta-sigma ADC with PGA, oscillator, VREF, comparator and I2C ADS1015-Q1 — Automotive 12-bit, 3.3-kSPS, 4-ch, delta-sigma ADC with PGA, oscillator, VREF, comparator and I2C ADS1015L — 12-bit, 3.3-kSPS four-channel delta-sigma ADC with PGA, comparator and 1.8-V I²C bus voltage support ADS1018 — 12-bit, 3.3-kSPS, 4-channel, delta-sigma ADC with PGA, oscillator, VREF, temp sensor and SPI ADS1018-Q1 — Automotive, 12-bit, 3.3-kSPS, 4-ch, delta-sigma ADC with PGA, oscillator, VREF, temp sensor and SPI ADS1100 — 16-Bit, 128SPS, 1-Ch Delta-Sigma ADC w/ PGA, Oscillator & I2C ADS1110 — 16-Bit 240SPS 1-Ch Delta-Sigma ADC With PGA, Oscillator, Voltage Reference, and I2C ADS1112 — 16-Bit 240SPS 4-Ch Delta-Sigma ADC With PGA, Oscillator, Voltage Reference, and I2C ADS1113 — 16-Bit 860SPS 1-Ch Delta-Sigma ADC With Oscillator, Voltage Reference, and I2C ADS1113-Q1 — Automotive 16-Bit 860SPS 1-Ch Delta-Sigma ADC With Oscillator, Voltage Reference, and I2C ADS1114 — 16-Bit 860SPS 1-Ch Delta-Sigma ADC With PGA, Oscillator, Vref, Comparator, and I2C ADS1114-Q1 — Automotive 16-Bit 860SPS 1-Ch Delta-Sigma ADC With PGA, Oscillator, Vref, Comparator, and I2C ADS1114L — 16-bit, 860-SPS one-channel delta-sigma ADC with PGA, comparator and 1.8-V I²C bus voltage support ADS1115 — 16-bit, 860-SPS, 4-channel, delta-sigma ADC with PGA, oscillator, VREF, comparator and I2C ADS1115-Q1 — Automotive 16-bit, 860-SPS, 4-ch, delta-sigma ADC with PGA, oscillator, VREF, comparator and I2C ADS1115L — 16-bit, 860-SPS four-channel delta-sigma ADC with PGA, comparator and 1.8-V I²C bus voltage support ADS1118 — 16-bit, 860-SPS, 4-channel, delta-sigma ADC with PGA, oscillator, VREF, temp sensor and SPI ADS1118-Q1 — Automotive 16-bit, 860-SPS, 4-ch, delta-sigma ADC with PGA, oscillator, VREF, temp sensor and SPI ADS1119 — 16-bit, 1kSPS, 4-ch general-purpose delta-sigma ADC with I2C interface and external Vref inputs ADS1120 — 16-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC with PGA, VREF, 2x IDACs & SPI interface ADS1120-Q1 — Automotive 16-bit 2-kSPS 4-ch low-power delta-sigma ADC with PGA and VREF for small signal sensors ADS112C04 — 16-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC with PGA, VREF, 2x IDACs & I2C interface ADS112U04 — 16-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC w/ PGA, VREF, 2x IDACs & UART interface ADS1130 — 18-Bit, 80SPS, 1-Ch Delta-Sigma ADC for Resistive Bridge Sensors & Weigh Scales ADS1131 — 18-Bit, 80SPS, 1-Ch Delta-Sigma ADC w/ Powerdown Switch for Resistive Bridge Sensors & Weigh Scales ADS1146 — 16-Bit 2kSPS 1-Ch ADC With PGA for Precision Sensor Measurement ADS1147 — 16-Bit 2kSPS 4-Ch ADC With PGA, Reference, and IDAC for Precision Sensor Measurement ADS1148 — 16-bit 2-kSPS ADC with PGA, reference and IDAC for precision sensor measurement ADS1148-Q1 — Automotive 16-bit 2-kSPS ADC with PGA, reference and IDAC for precision sensor measurement ADS114S06 — 16-bit, 4-kSPS, 6-ch delta-sigma ADC with PGA and voltage reference for sensor measurement ADS114S06B — 16-bit, 4-kSPS, 6-ch delta-sigma ADC With PGA and voltage reference for low-cost applications ADS114S08 — 16-bit, 4-kSPS, 12-ch delta-sigma ADC with PGA and voltage reference for sensor measurement ADS114S08B — 16-bit, 4-kSPS, 12-ch delta-sigma ADC with PGA and voltage reference for low-cost applications ADS1158 — 16-Bit, 125kSPS, 16-Ch Delta-Sigma ADC w/ Fast Channel Scan & Automatic Sequencer ADS1174 — Quad, Simultaneous Sampling, 16-Bit Analog-to-Digital Converter ADS1178 — Octal, Simultaneous Sampling, 16-Bit Analog-to-Digital Converter ADS117L11 — 16-bit, 400-kSPS, low-power, wide-bandwidth delta-sigma ADC with input and reference buffers ADS117L14 — 512-kSPS, 16-bit, four-channel, simultaneous-sampling, wide-bandwidth, delta-sigma ADC ADS117L18 — 512-kSPS, 16-bit, eight-channel, simultaneous-sampling, wide-bandwidth, delta-sigma ADC ADS1202 — Current-shunt delta-sigma modulator, 10MHz CLK, +/-250mV input, 16-bit resolution ADS1203 — Current-shunt delta-sigma modulator, 10MHz CLK, +/-250mV input, 16-bit resolution, ext ref option ADS1204 — Four Delta-Sigma Modulators, 10MHz CLK, 0-5V Input, 16-Bit Resolution ADS1205 — Two 1-Bit, 10MHz, 2nd-Order, Delta-Sigma Modulator ADS1208 — 10MHz Modulator With Built-in Current Excitation for Hall Sensors ADS1209 — 16-Bit, 10MHz, 2-Ch, Delta-Sigma Modulator ADS1211 — 24-bit, 15.6-kSPS, 8-ch delta-sigma ADC with VREF and PGA ADS1213 — 22-bit, 6.25-kSPS, 8-ch Delta-Sigma ADC with VREF and PGA ADS1216 — 24-bit, 8-ch delta-sigma ADC with VREF, PGA, IDACs and RAM ADS1217 — 8-Channel, 24-Bit Analog-to-Digital Converter ADS1218 — 24-Bit, 780SPS ADC w/ Flash Memory, 8 Ch, VREF, Buffer, 2 IDACs, Serial Out, Digital I/O, Low Power ADS1219 — 24-bit, 1kSPS, 4-ch general-purpose delta-sigma ADC with I2C interface and external Vref inputs ADS1220 — 24-bit, 2-kSPS, four-channel, low-power, delta-sigma ADC with PGA, VREF, SPI and two IDACs ADS1222 — 24-bit ADC with 2-channel differential input multiplexer ADS1224 — 24-bit 240-SPS ADC with 4-channel differential input multiplexer, high-Z buffer, and serial output ADS1225 — 24-bit 100-SPS ADC with differential input and internal oscillator ADS1226 — 24-bit ADC with two differential input multiplexers and internal oscillators ADS122C04 — 24-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC with PGA, VREF, 2x IDACs & I2C interface ADS122U04 — 24-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC w/ PGA, VREF, 2x IDACs & UART interface ADS1230 — 20-Bit, 80SPS, 1-Ch Delta-Sigma ADC for Resistive Bridge Sensors & Weigh Scales ADS1231 — 24-Bit, 80SPS, 1-Ch Delta-Sigma ADC for Resistive Bridge Sensors & Weigh Scales ADS1232 — 24-Bit, 80SPS, 2-Ch (Differential), Pin-Programmable Delta-Sigma ADC for Bridge Sensors ADS1234 — 24-Bit, 80SPS, 4-Ch (Differential), Pin-Programmable Delta-Sigma ADC for Bridge Sensors ADS1235 — 24-bit, 7.2-kSPS, 3-ch differential, delta-sigma ADC with PGA and AC excitation for bridge sensors ADS1235-Q1 — Automotive 24-bit, 7.2-kSPS, 3-ch differential input, delta-sigma ADC with PGA and AC excitation ADS1240 — 24-Bit, 30-SPS, 4-Ch delta-sigma ADC with PGA ADS1241 — 24-Bit, 30-SPS, 8-Ch delta-sigma ADC with PGA ADS1242 — 24-Bit ADC, 4 Ch, PGA 1:128, 50/60 Hz Notch, 0.6 mW Power Consumption ADS1243 — 24-Bit ADC, 8 Ch, PGA 1:128, 50/60 Hz Notch, 0.6 mW Power Consumption ADS1243-HT — High-Temperature 24-Bit ADC, 8-Ch, PGA 1:128, 50/60Hz Notch ADS1244 — 24-Bit 15sps Delta-Sigma ADC with 50 & 60Hz rejection ADS1245 — 24-Bit Low-Power ADC With High-Z Input Buffer ADS1246 — 24-Bit, 2kSPS, 1-Ch Delta-Sigma ADC With PGA for Precision Sensor Measurement ADS1247 — 24-Bit, 2kSPS, 4-Ch Delta-Sigma ADC With PGA, Vref and 2x IDACs for Precision Sensor Measurement ADS1248 — 24-bit, 2-kSPS, eight-channel delta-sigma ADC for precision sensor measurement ADS124S06 — 24-bit, 4-kSPS, 6-ch delta-sigma ADC with PGA and voltage reference for precision sensor measurement ADS124S08 — 24-bit, 4-kSPS, 12-ch delta-sigma ADC with PGA and voltage reference for sensor measurement ADS1250 — 20-Bit Data Acquisition System Analog-to-Digital Converter ADS1251 — 24-Bit, 20kHz, Low-Power Analog-to-Digital Converter ADS1252 — ResolutionPlus 24-Bit, 40kHz Analog-to-Digital Converter ADS1253 — 24-Bit, 20-kSPS, 4-Ch, single-supply delta-sigma ADC ADS1254 — 24-Bit, 20-kSPS, 4-Ch delta-sigma ADC with separate AVDD and DVDD ADS1255 — 24-Bit, 30kSPS, Very-Low-Noise Delta-Sigma ADC ADS1256 — 24-Bit, 30kSPS, 8-Ch Delta-Sigma ADC With PGA for Factory Automation and Process Control ADS1257 — 24-Bit, 30kSPS, 4-Ch Industrial ADC With Integrated PGA ADS1258 — 24-bit, 125kSPS, 16-ch delta-sigma ADC with fast channel scan and automatic sequencer ADS1258-EP — Enhanced product 16-channel 24-bit analog-to-digital converter (ADC) ADS1259 — 24-bit, 14.4kSPS, 1-ch delta-sigma ADC with low-drift voltage reference for factory automation ADS1259-Q1 — Automotive, 24-bit, 14.4kSPS, 1-ch delta-sigma ADC w/ low-drift Vref for high-dynamic range systems ADS125H01 — 24-bit, 40-kSPS, 1-ch delta-sigma ADC with low-noise PGA and ±20-V input ADS125H02 — 24-bit, 40-kSPS, 2-ch delta-sigma ADC with ±20-V input, PGA, IDACs, GPIOs and VREF ADS1260 — 24-bit, 40-kSPS, 5-ch delta-sigma ADC with PGA, VREF and IDACs for factory automation ADS1260-Q1 — Automotive 24-bit, 40-kSPS, 5-ch delta-sigma ADC with PGA, VREF and IDACs ADS1261 — 24-bit, 40-kSPS, 10-ch delta-sigma ADC with PGA, VREF, IDACs & AC excitation for factory automation ADS1261-Q1 — Automotive 24-bit, 40-kSPS, 10-ch, delta-sigma ADC with PGA, VREF, IDACs and AC excitation ADS1262 — 32-bit 38-kSPS 10-ch delta-sigma ADC with PGA and voltage reference for factory automation ADS1263 — 32-bit 38-kSPS 10-ch delta-sigma ADC with PGA, VREF and auxiliary ADC for factory automation ADS1271 — 24-Bit, 105kSPS, 1-Ch Delta-Sigma ADC for Wide Bandwidth Applications ADS1274 — 24-Bit, 144kSPS, 4-Ch Simultaneous-Sampling Delta-Sigma ADC for Wide Bandwidth Applications ADS1278 — 24-Bit, 144kSPS, 8-Ch Simultaneous-Sampling Delta-Sigma ADC for Wide Bandwidth Applications ADS1278-EP — Enhanced Product Octal, 144kHz, Simultaneous Sampling 24-Bit Delta Sigma ADC ADS1278-HT — High-Temperature Quad/Octal, Simultaneous-Sampling, 24-Bit Analog-to-Digital Converter ADS1278-SP — Radiation Hardened 24-Bit 8-Ch Simultaneous-Sampling Delta-Sigma ADC ADS127L01 — 24-Bit, 512kSPS, 1-Ch, Very-Low-Power, Wide-Bandwidth Delta-Sigma ADC ADS127L11 — 24-bit, 400-kSPS, delta-sigma ADC with easy-to-drive inputs and wideband or low-latency filters ADS127L14 — Four-channel, simultaneous-sampling, 512-kSPS, wideband 24-bit delta-sigma ADC ADS127L18 — Eight-channel, simultaneous-sampling, 512-kSPS, wideband 24-bit delta-sigma ADC ADS127L21 — 24-bit, 512-kSPS wide-bandwidth delta-sigma ADC with programmable IIR and FIR filters ADS127L21B — 24bit, 512kSPS wide-bandwidth delta-sigma ADC with high-linearity of 0.8 ppm max INL ADS1281 — Ultra-high-resolution 4-kSPS 1-channel delta-sigma ADC for seismic and energy exploration ADS1282 — Ultra-high-resolution 4-kSPS 2-channel delta-sigma ADC with PGA for seismic and energy exploration ADS1282-SP — High-resolution analog-to-digital converter (ADC) ADS1283 — Ultra-high-resolution 4-kSPS 2-ch delta-sigma ADC with PGA for seismic and energy exploration ADS1284 — Ultra-high-resolution 4-kSPS 2-ch ADC w/ PGA and low-power mode for seismic and geospace exploration ADS1285 — 32-bit high-resolution two-channel delta-sigma ADC for seismic and geospace exploration ADS1286 — 12-bit micropower sampling analog-to-digital converter (ADC) ADS1287 — Low-power 1-kSPS 1-ch delta-sigma ADC with PGA for seismic and energy exploration ADS1287D — Low-power 1-kSPS 2-ch (simultaneous) delta-sigma ADC with PGA for seismic and energy exploration ADS1288 — Low-power, 32-bit two-channel delta-sigma ADC for seismic and geospace exploration ADS130B02-Q1 — Automotive 16-bit, 32-kSPS, two-channel, simultaneous-sampling, delta-sigma ADC ADS130B04-Q1 — Automotive 16-bit, 32-kSPS, four-channel, simultaneous-sampling, delta-sigma ADC ADS130E08 — Low-Cost, 8-Channel, Integrated Analog Front-End for Metering Applications ADS131A02 — 24-bit 128-kSPS 2-channel simultaneous-sampling delta-sigma ADC ADS131A04 — 24-bit 128-kSPS 4-channel simultaneous-sampling delta-sigma ADC ADS131B02-Q1 — Automotive 24-bit, 32-kSPS, two-channel, simultaneous-sampling, delta-sigma ADC ADS131B04-Q1 — Automotive 24-bit, 32-kSPS, four-channel, simultaneous-sampling, delta-sigma ADC ADS131B23 — 3 ADC channel, SPI, high-voltage battery pack monitor for current and voltage sensing ADS131B23-Q1 — Automotive high-voltage battery-pack monitor with three ADC channels for current and voltage sensing ADS131B24-Q1 — Automotive high-voltage battery-pack monitor with four ADC channels for current and voltage sensing ADS131B26-Q1 — Automotive high-voltage battery-pack monitor with six ADC channels for current and voltage sensing ADS131E04 — 24-bit 64-kSPS 4-channel simultaneous-sampling delta-sigma ADC for power monitoring and protection ADS131E06 — 24-bit 64-kSPS 6-channel simultaneous-sampling delta-sigma ADC for power monitoring and protection ADS131E08 — 24-bit 64-kSPS 8-channel simultaneous-sampling delta-sigma ADC for power monitoring and protection ADS131E08S — 24-bit 64-kSPS 8-ch simultaneous delta-sigma ADC with fast start-up for monitoring and protection ADS131M02 — Two-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC ADS131M02-Q1 — Automotive, two-channel, 24-bit, 64-kSPS simultaneous-sampling delta-sigma ADC ADS131M03 — Three-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC ADS131M03-Q1 — Automotive, three-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC ADS131M04 — Four-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC ADS131M04-Q1 — Automotive, four-channel, 24-bit, 64-kSPS simultaneous-sampling delta-sigma ADC ADS131M06 — Six-channel, 24-bit, 32-kSPS, simultaneous-sampling, delta-sigma ADC ADS131M06-Q1 — Automotive, six-channel, 24-bit, 32-kSPS simultaneous-sampling delta-sigma ADC ADS131M08 — 24-bit, 32-kSPS, 8-channel, simultaneous-sampling, delta-sigma ADC ADS131M08-Q1 — Automotive, eight-channel, 24-bit, 32-kSPS simultaneous-sampling delta-sigma ADC ADS1601 — 16-Bit, 1.25MSPS, High Speed and High Precision Delta Sigma ADC ADS1602 — 16-Bit, 2.5MSPS Analog-to-Digital Converter ADS1605 — 16-bit, 5 MSPS Delta-Sigma, Analog-to-Digital Converter ADS1606 — 16 Bit, 5MSPS Single Channel Delta-Sigma ADC Single with FIFO ADS1610 — 16-Bit, 10MSPS Delta-Sigma Analog-to-Digital Converter ADS1625 — 18 Bit, 1.25MSPS Single Channel Delta-Sigma ADC ADS1626 — 18 Bit, 1.25MSPS Single Channel Delta-Sigma ADC Single with an adjustable FIFO ADS1672 — High Speed High Resolution 625kSPS 24 bit Delta Sigma ADC ADS1675 — 4MSPS, 24-Bit Analog-to-Digital Converter ADS7028 — Small 8-channel 12-bit analog-to-digital converter (ADC) with SPI, GPIOs and CRC ADS7029-Q1 — Ultra-Low-Power Ultra-Small-Size 8-Bit 2MSPS SAR ADC ADS7038 — 8-channel, 1-MSPS, 12-bit analog-to-digital converter (ADC) with SPI, GPIOs and CRC ADS7038-Q1 — Automotive, 8-channel, 1-MSPS, 12-bit analog-to-digital converter (ADC) with SPI, GPIOs and CRC ADS7038H — 8-channel, 1.5MSPS, 12-bit analog-to-digital converter (ADC) with SPI, GPIOs and CRC ADS7039-Q1 — Ultra-Low-Power Ultra-Small-Size 10-Bit 2MSPS SAR ADC ADS7040 — Ultra-low-power, ultra-small-size SAR ADC, 8 bit, 1 MSPS, single ended ADS7041 — Ultra-low power and ultra-small size SAR ADC, 10 bit, 1 MSPS, single ended ADS7042 — 12-Bit 1MSPS Ultra-Low-Power Ultra-Small-Size SAR ADC With SPI Interface ADS7043 — Ultra-Low-Power Ultra-Small-Size SAR ADC | 12 Bit | 1MSPS | Pseudo Differential ADS7044 — Ultra-Low-Power Ultra-Small-Size SAR ADC | 12 Bit | 1MSPS | Fully Differential ADS7046 — 12-Bit, 3MSPS, Single-Ended Input, Small-Size Low-Power SAR ADC ADS7047 — 12-Bit, 3MSPS, Differential Input, Small-Size Low-Power SAR ADC ADS7049-Q1 — Ultra-Low-Power Ultra-Small-Size 12-Bit 2MSPS SAR ADC ADS7052 — 14-Bit, 1MSPS, Single-Ended Input, Small-Size Low-Power SAR ADC ADS7054 — 14-Bit, 1MSPS, Differential Input, Small-Size Low-Power SAR ADC ADS7056 — 14-bit 2.5-MSPS ultra-low-power ultra-small-size SAR ADC with SPI ADS7057 — 14-Bit, 2.5MSPS, Differential Input, Small-Size Low-Power SAR ADC ADS7066 — Eight-channel, 250-kSPS, 16-bit analog-to-digital converter with internal reference, GPIOs and SPI ADS7067 — Eight-channel, 800-kSPS, 16-bit SAR analog-to-digital converter (ADC) with GPIOs and SPI ADS7128 — Small 8-ch 12-bit analog-to-digital converter (ADC) with I2C interface, GPIOs, CRC and RMS module ADS7138 — 8-channel, 140-kSPS, 12-bit analog-to-digital converter (ADC) with I2C, GPIOs and CRC ADS7138-Q1 — Automotive, 8-channel, 140-kSPS, 12-bit analog-to-digital converter (ADC) with I2C, GPIOs and CRC ADS7142 — 12-bit 140-kSPS 2-ch nanopower SAR ADC with 1.8-V operation in 1.5-mm x 2-mm QFN package ADS7142-Q1 — Automotive 2-channel 12-bit 140-kSPS I2C-compatible ADC with programmable threshold and host wake-up ADS7223 — 12-bit 1MSPS 4x2/2x2 Simultaneous Sampling SAR ADC ADS7229 — 12-Bit, 1-MSPS, 1-ch SAR ADC w/ single-ended inputs ADS7230 — Low-power, 12-bit, 2-channel, 1-MHz, single/dual unipolar input, ADCs with serial interface ADS7250 — SAR ADC, Dual, 750 kSPS, 12 Bit, Simultaneous Sampling ADS7251 — SAR ADC, Dual, 2 MSPS, 12 Bit, Simultaneous Sampling ADS7253 — 12 Bit, 1 MSPS, Dual, Simultaneous Sampling Single Ended / Pseudo-Differential SAR ADC ADS7254 — 12 Bit, 1 MSPS, Dual, Simultaneous Sampling Differential SAR ADC ADS7263 — 14-bit 1MSPS 4x2/2x2 Simultaneous Sampling SAR ADC ADS7279 — Low-Power, 14-Bit, 1-MHz, Single Unipolar Input, ADC with Serial Interface ADS7280 — Low-Power, 14-Bit, 1-MHz, Dual Unipolar Input, ADC with Serial Interface ADS774 — Microprocessor-Compatible Sampling CMOS A/D Converter ADS774H — Microprocessor-Compatible Sampling CMS Analog-to-Digital Converter ADS7800 — 12-Bit 3us Sampling Analog-to-Digital Converter ADS7804 — 12-Bit 10us Sampling CMOS Analog-to-Digital Converter ADS7805 — 16-Bit 10us Sampling CMOS Analog-to-Digital Converter ADS7806 — Low-Power 12-Bit Sampling CMOS Analog-to-Digital Converter ADS7807 — Low-Power 16-Bit Sampling CMOS Analog-to-Digital Converter ADS7808 — 12-bit 10-µs serial CMOS-sampling analog-to-digital converter (ADC) ADS7809 — 16-Bit 10us Serial CMOS Sampling Analog-to-Digital Converter ADS7811 — 16-Bit, 250-kSPS, 1-Ch SAR ADC with single-ended input ADS7812 — Low-Power, Serial 12-Bit Sampling Analog-To-Digital Converter ADS7813 — Low-Power, Serial 16-Bit Sampling Analog-To-Digital Converter ADS7815 — 16-Bit, 250-kSPS, 1-Ch SAR ADC with single-ended input ADS7816 — 12-bit high-speed micropower sampling analog-to-digital converter (ADC) ADS7817 — 12-Bit Differential Input Micro Power Sampling Analog-to-Digital Converter ADS7818 — 12-Bit High Speed Low Power Sampling Analog-to-Digital Converter with 5V input range ADS7822 — 12-Bit, 200kSPS Micro Power Sampling Analog-To-Digital Converter ADS7822-Q1 — Automotive 12-Bit, 200kSPS Micro Power Sampling Analog-To-Digital Converter ADS7823 — 12-Bit Low Power,I2C Serial, Sampling Analog-To-Digital Converter ADS7824 — 4-Channel, 12-Bit Sampling CMOS A/D Converter ADS7825 — 4 Channel, 16-Bit Sampling CMOS A/D Converter ADS7826 — 5.25V-2.7V, 10 bit, 200KSPS, Synchronous Serial ADC ADS7827 — 5.25V-2.7V, 8 bit, 250KSPS, Synchronous Serial ADC ADS7828 — 12-Bit, 8-Channel SAR ADC with Internal Reference and I2C Interface ADS7828-Q1 — Automotive 12-Bit 50 kSPS ADC I2C Low Power 8-Channel MUX Int 2.5V Ref ADS7829 — 12-Bit High Speed 2.7V microPower Sampling Analog-to-Digital Converter ADS7830 — 8-Bit, 8-Channel Sampling A/D Converter with I2C Interface ADS7834 — 12-Bit High Speed Low Power Sampling Analog-to-Digital Converter with 2.5V input range ADS7835 — 12-Bit, High-Speed, Low Power Sampling Analog-to-Digital Converter ADS7841 — 12-bit 4-channel serial output sampling analog-to-digital converter (ADC) ADS7841-Q1 — Automotive 12-bit 4-channel serial output sampling analog-to-digital converter (ADC) ADS7842 — 12-Bit, 4-Channel Parallel Output Sampling Analog-to-Digital Converter ADS7844 — 12-Bit, 8-Channel Serial Output Sampling Analog-To-Digital Converter ADS7850 — SAR ADC, Dual, 750 kSPS, 14 Bit, Simultaneous Sampling ADS7851 — SAR ADC, Dual, 1.5 MSPS, 14 Bit, Simultaneous Sampling ADS7852 — 12-Bit, 8-Channel, Parallel Output Analog-to-Digital Converter ADS7853 — SAR ADC, dual, single-ended input, 1 MSPS, 14-bit, simultaneous sampling ADS7854 — SAR ADC, dual, differential input, 1 MSPS, 14-bit, simultaneous sampling ADS7861 — Dual, 500kHz, 12-Bit, 2+2 Ch, Simultaneous Sampling Analog-To-Digital Converter ADS7862 — Dual 500kHz, 12-Bit, 2+2 Ch Simultaneous Sampling Analog-To-Digital Converter ADS7863 — Dual, 2MSPS, 12-Bit, 3+3 or 2+2 Channel, Simultaneous Sampling Analog-To-Digital SAR Converter ADS7863A — Dual, 2MSPS, 12-Bit, 2+2 or 3+3 Channel, Simultaneous Sampling SAR ADC ADS7864 — 500kHz, 12-Bit, 6-Channel Simultaneous Sampling Analog-To-Digital Converter ADS7865 — Dual, 2MSPS, 12-Bit, 3+3 or 2+2 Channel, Simultaneous Sampling ADC ADS7866 — 1.2V, 12 Bit 200KSPS, Serial ADC ADS7867 — 1.2V, 10 bit 240KSPS, Serial ADC ADS7868 — 1.2V, 8 bit 280KSPS, Serial ADC ADS7869 — 12-Ch 7 Simultaneous Sampling, Analog Motor Control Front End w/3 1MSPS, 12-Bit ADCs ADS7870 — 12-Bit ADC, MUX, PGA and Internal Reference Data Acquisition System ADS7871 — 14-Bit 48KSPS DAS with ADC, MUX, PGA and Internal Reference ADS7881 — 2.7V-5.25V Digital, 5V Analog, 12 Bit, 4MSPS, Parallel ADC with Ref ADS7882 — 2.7V-5.25V Digital, 5V Analog, 12 Bit, 3MSPS, Parallel ADC with Ref ADS7883 — 2.7V-5.5V, 12 bit, 3MSPS, Serial ADC ADS7884 — 2.7V-5.5V, 10 Bit, 3MSPS, Serial ADC ADS7885 — 2.7V-5.5V, 8 Bit, 3MSPS, Serial ADC ADS7886 — 2.35V-5.25V, 12 bit, 1MSPS, Serial ADC ADS7887 — 2.35V-5.25V, 10 Bit, 1.25MSPS, Serial ADC ADS7888 — 2.35V-5.25V, 8 Bit, 1.25MSPS, Serial ADC ADS7890 — 14-Bit, 1.25MSPS, 1-Ch SAR ADC with Serial Interface and Internal Voltage Reference ADS7891 — 2.7-V to 5.25-V digital, 5-V analog, 14-bit 3-MSPS parallel ADC with internal reference ADS7924 — 12-Bit 4-Ch MUX-Input SAR ADC With Intelligent System Power Control ADS7945 — 14-Bit, 2MSPS, Dual-Channel, Unipolar, Differential, u-Power SAR ADC ADS7946 — 14-Bit, 2MSPS, Dual-Channel, Unipolar, Pseudo-Differential, u-Power SAR ADC ADS7947 — 12-Bit, 2 MSPS, Dual Channel, Pseudo-differential uPower Serial SAR ADC ADS7948 — 10-Bit, 2 MSPS, Dual Channel, Pseudo-differential uPower Serial SAR ADC ADS7949 — 8-Bit, 2 MSPS, Dual Channel, Pseudo-differential, uPower Serial SAR ADC ADS7950 — 12 bit, 1 MSPS, 4 ch, single ended, micro power, sr i/f, SAR ADC ADS7950-Q1 — Automotive, 12-bit, 1-MSPS, 4-channel, single-ended SAR ADC ADS7951 — 12 bit, 1 MSPS, 8 Channel, Single-Ended, SAR ADC ADS7951-Q1 — Automotive 12 bit, 1 MSPS, 8 Channel, Single-Ended, SAR ADC ADS7952 — 12 bit, 1 MSPS, 12 Ch, single ended, micro power, sr i/f, SAR ADC ADS7952-Q1 — Automotive 12-Bit, 1MSPS, 12-Channel Single-Ended Micropower, Serial Interface ADC ADS7953 — 12-Bit, 1-MSPS, 16-Channel, Single-Ended, microPower SAR ADC with Serial I/F ADS7953-Q1 — Automotive 12-Bit, 1MSPS, 16-Channel Single-Ended Micropower, Serial Interface ADC ADS7954 — 10 bit, 1 MSPS, 4 Ch, Single Ended, Micro Power, sr i/f, SAR ADC ADS7954-Q1 — Automotive 10 bit, 1 MSPS, 4 Channel, Single-Ended, SAR ADC ADS7955 — 10 bit, 1 MSPS, 8 Ch, Single Ended, Micro Power, sr i/f, SAR ADC ADS7955-Q1 — Automotive 10 bit, 1 MSPS, 8 Channel, Single-Ended, SAR ADC ADS7956 — 10 bit, 1 MSPS, 12 Ch, Single Ended, Micro Power, sr i/f, SAR ADC ADS7956-Q1 — Automotive 10-Bit, 1MSPS, 12-Channel Single-Ended Micropower, Serial Interface ADC ADS7957 — 10 bit, 1 MSPS, 16 Ch, Single Ended, Micro Power, sr i/f, SAR ADC ADS7957-Q1 — Automotive 10-Bit, 1MSPS, 16-Channel Single-Ended Micropower, Serial Interface ADC ADS7958 — 8 bit, 1 MSPS, 4 Channel, Single-Ended, SAR ADC ADS7958-Q1 — Automotive 8 bit, 1 MSPS, 4 Channel, Single-Ended, SAR ADC ADS7959 — 8 bit, 1 MSPS, 8 Ch, Single Ended, Micro Power, sr i/f, SAR ADC ADS7959-Q1 — Automotive 8 bit, 1 MSPS, 8 Channel, Single-Ended, SAR ADC ADS7960 — 8 Bit, 1 MSPS, 12 Ch, Single Ended, Micro Power, sr i/f, SAR ADC ADS7960-Q1 — Automotive 8 bit, 1 MSPS, 12 Channel, Single-Ended, SAR ADC ADS7961 — 8 Bit, 1 MSPS, 16 Ch, Single Ended, Micro Power, sr i/f, SAR ADC ADS7961-Q1 — Automotive 8-Bit, 1MSPS, 16-Channel Single-Ended Micropower, Serial Interface ADC ADS8028 — 12-bit, 8-channel, 1MSPS, SAR ADC with Internal Reference and Internal Temperature Sensor ADS8166 — 16-bit, 250-kSPS, 8-ch SAR ADC with VREF, VREF buffer and direct sensor interface ADS8167 — 16-bit, 500-kSPS, 8-ch SAR ADC with VREF, VREF buffer and direct sensor interface ADS8168 — 16-bit, 1-MSPS, 8-ch SAR ADC with VREF, VREF buffer and direct sensor interface ADS8201 — 2.2V to 5.5V, Low-Power, 12-Bit, 100kSPS, 8-Channel DAS with PGA and SPI™ ADS8284 — 18 bit, 1 MSPS, 4 channel, Pseudo bipolar, differential ADC with onboard ADC driver OPA ADS8317 — 16-Bit, Pseudo-Bipolar, Fully Diff Input, 250kSPS Serial Out, 2.7V-to-5.5V Micropower Sampling ADC ADS8318 — 16-Bit, Unipolar Differential Input, 500kSPS Serial Out, 4.5V-to-5.5V Micropower Sampling ADC ADS8319 — Precision 16-Bit SAR Analog-to-Digital Converter (ADC) With SPI Interface ADS8320 — 16-Bit, High-Speed, 2.7V-to-5V Micropower Sampling Analog-to-Digital Converter (ADC) ADS8320-HT — High-Temperature 16-bit, high-speed, 2.7 V-to-5 V micropower sampling ADC ADS8321 — 16-Bit, High-Speed, Micropower Sampling Analog-to-Digital Converter (ADC) ADS8322 — Unipolar, 16-Bit, 500kSPS CMOS Analog-to-Digital Converter (ADC) ADS8323 — Pseudo Bipolar, 16-Bit, 500kSPS CMOS Analog-to-Digital Converter ADS8324 — 14-Bit 50 kSPS ADC Ser. Out, 1.8V Operation ADS8325 — 16-Bit, 100kSPS Serial Out, 2.7V-to-5.5V Micropower Sampling ADC ADS8326 — 16-Bit, Pseudo-Diff Input, 250kSPS Serial Out, 2.7V-to-5.5V Micropower Sampling ADC ADS8327 — 2.7V-to-5.5V 16-Bit 500kSPS Serial Analog-to-Digital Converter (ADC) ADS8328 — 2.7V-to-5.5V 16-Bit 500kSPS Serial ADC With 2-to-1 Multiplexer ADS8329 — 2.7V-to-5.5V 16-Bit 1MSPS Serial Analog-to-Digital Converter (ADC) ADS8330 — 2.7V-to-5.5V 16-Bit 1MSPS Serial ADC With 2-to-1 Multiplexer ADS8331 — 2.7V-to-5.5V 16-Bit 500kSPS Low-Power Serial Analog-to-Digital Converter (ADC) ADS8332 — 2.7V-to-5.5V, 16-Bit, 500kSPS Low-Power Serial ADC With 8-Ch Multiplexer and Breakout ADS8339 — 16-bit, 250-kSPS, serial-interface micropower, miniature SAR ADC ADS8341 — 16-Bit, 4-Channel Serial Output Sampling Analog-to-Digital Converter (ADC) ADS8342 — 16-Bit 250 kSPS ADC Parallel Out, 4 true bipolar channels ADS8343 — 16-Bit, 4-Channel Serial Output Sampling Analog-To-Digital Converter ADS8344 — 16-Bit, 100-kSPS, 8-Ch SAR ADC with single-ended inputs ADS8345 — 16-Bit, 100-kSPS, 8-Ch SAR ADC with fully differential inputs ADS8350 — Dual 750kSPS 16-Bit Simultaneous-Sampling SAR Analog-to-Digital Converter (ADC) ADS8353 — 16-bit 600-kSPS 2-channel simultaneous-sampling SAR ADC with single-ended inputs ADS8353-Q1 — Automotive 16-bit 600-kSPS 2-channel simultaneous-sampling SAR ADC with single-ended inputs ADS8354 — Dual 700kSPS 16-Bit Simultaneous-Sampling SAR Analog-to-Digital Converter (ADC) ADS8355 — 16-bit 1-MSPS 2-channel simultaneous-sampling SAR ADC with single-ended inputs ADS8361 — 16-Bit 500 kSPS 2 ADCs, 4ch, serial out ADS8363 — 16-Bit, 1-MSPS, 4x2/2x2 Simultaneous-Sampling SAR ADC ADS8364 — 6-Channel 16-Bit Simultaneous-Sampling SAR ADC With 250kSPS for Motor and Power Control ADS8365 — 16-Bit 250kSPS 6-Ch Simultaneous Sampling SAR ADC ADS8370 — 16-Bit 600KSPS Serial ADC with Ref and Unipolar Pseudo Diff Input ADS8371 — 16-Bit 750-kHz Unipolar Input Micro Power Sampling ADC Converter w/Parallel ADS8372 — 16-Bit 600KSPS Serial ADC with Ref and Pseudo Bipolar, Fully Differential Input ADS8380 — 18-Bit 600KSPS Serial ADC with Ref and Unipolar Pseudo Diff Input ADS8381 — 18 Bit 580KSPS parallel ADC ADS8382 — 18-Bit 600KSPS Serial ADC with Ref and Pseudo Bipolar, Fully Differential Input ADS8383 — 18 Bit 500KSPS Parallel ADC ADS8405 — 16-Bit 1.25 MSPS Unipolar Input Micro Power Sampling ADC ADS8406 — 16-Bit 1.25 MSPS, Pseudo Bipolar, Fully Differential Input Micro Power Sampling ADC ADS8411 — 16-Bit, 2MSPS ADC with P8/P16 Parallel Output, Internal Clock & Internal Reference ADS8412 — 16-Bit 2MSPS Parallel ADC W/Ref, Unipolar Fully Differential Input ADS8413 — 16-bit, Unipolar Diff Input, 2MSPS Sampling rate, 4.75V to 5.25V ADC with LVDS Serial Interface ADS8422 — 16 Bit 4MSPS Parallel ADC W/Ref, Pseudo Bipolar, Fully Differential Input ADS8471 — 16-bit 1-MSPS pseudo-differential SAR ADC with reference ADS8472 — 16-Bit 1MSPS 0.65 LSB Max INL Precision ADC with Parallel Interface and Reference ADS8481 — 18 Bit 1MSPS parallel ADC W/Ref ADS8482 — 18 Bit 1MSPS Parallel ADC W/Ref, Pseudo Bipolar, Fully Differential Input ADS8484 — 18 Bit 1.25MSPS Parallel ADC W/Ref, Pseudo Bipolar, Fully Differential Input ADS8504 — 12-Bit 250kHz CMOS Analog-to-Digital Converter With Parallel Interface 2.5V Internal Reference ADS8505 — 16-Bit, 250-kSPS, 1-Ch SAR ADC with programmable (±10/±5/±3.3V) input ranges and parallel interface ADS8506 — 12-Bit 40KSPS Analog-to-Digital Converter With Serial Interface and Reference Parallel ADS8507 — 16-Bit 40KSPS Analog-to-Digital Converter With Internal Reference and Parallel/Serial Interface ADS8508 — 12-Bit 250kHz CMOS Analog-to-Digital Converter With Serial Interface 2.5V Internal Reference ADS8509 — 16-Bit, 250-kSPS, 1-Ch SAR ADC with programmable (±10/±5/±3.3V) input ranges and SPI interface ADS8512 — 12-Bit 40kSPS Low-Power Sampling ADC With Internal Reference and Serial Interface ADS8513 — 16-Bit 40kSPS Low-Power Sampling ADC With Internal Reference and Parallel/Serial Interface ADS8515 — 16-Bit 250kHz CMOS Analog-to-Digital Converter With Parallel Interface 4.096V Internal Reference ADS8517 — Low-Power 16-Bit 200kSPS ±10V Bipolar Input SAR ADC With S/P Interface ADS8519 — 16-Bit 250kHz CMOS Analog-to-Digital Converter With Serial Interface 4.096V Internal Reference ADS8528 — 12-Bit 8-Channel Simultaneous-Sampling Bipolar-Input ADC ADS8548 — 14-Bit 8-Channel Simultaneous-Sampling Bipolar-Input ADC ADS8555 — 630-kSPS, 16-bit, six-channel, simultaneous-sampling analog-to-digital converter (ADC) ADS8556 — 630kSPS 6-Channel Simultaneous-Sampling ADC ADS8557 — 670kSPS 14-Bit 6-Channel Simultaneous-Sampling ADC ADS8558 — 730kSPS 12-Bit 6-Channel Simultaneous-Sampling ADC ADS8568 — 16-bit, 8-channel, simultaneous-sampling, bipolar-input, SAR analog-to-digital converter (ADC) ADS8578S — 14-Bit High-Speed 8-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply ADS8584S — 16-Bit High-Speed 4-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply ADS8586S — 16-Bit High-Speed 6-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply ADS8588H — 16-Bit 500kSPS 8-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply ADS8588S — 16-Bit High-Speed 8-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply ADS8598H — 18-Bit 500kSPS 8-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply ADS8598S — 18-Bit 200kSPS 8-Channel Simultaneous-Sampling ADC With Bipolar Inputs on a Single Supply ADS8634 — 12-Bit 4-Channel Bipolar SAR With Software-Selectable Input Ranges ADS8638 — 12-Bit 8-Channel Bipolar SAR With Software-Selectable Input Ranges ADS8661 — 12-Bit, 1.25-MSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8661W — 12-bit, 1.25-MSPS, one-channel, wide bandwidth SAR ADC with programmable input ranges on +5V supply ADS8664 — 12-Bit SAR ADC With 4-Channels, 500kSPS, and Bipolar Inputs Off 5V Supply ADS8665 — 12-Bit, 500-kSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8668 — 12-Bit 500kSPS 8-Channel SAR ADC With Bipolar Inputs Off 5V Supply ADS8671 — 14-Bit, 1-MSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8674 — 14-Bit 500kSPS 4-Channel SAR ADC With Bipolar Inputs Off 5V Supply ADS8675 — 14-Bit, 500-kSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8678 — 14-Bit 500kSPS 8-Channel SAR ADC With Bipolar Inputs Off 5V Supply ADS8681 — 16-bit, 1MSPS 1-ch SAR ADC with programmable (±12V, ±10V, ±6V, ±5V, ±2.5V) input ranges on 5V supply ADS8681W — 16-bit, 1MSPS, one-channel, wide bandwidth SAR ADC with programmable input ranges on +5V supply ADS8684 — 16-Bit, 500-kSPS, 4-Ch SAR ADC w/ programmable (±10/±5/±2.5V) input ranges on +5V supply ADS8684A — 16-Bit, 500-kSPS, 4-Ch SAR ADC w/ programmable (±10/±5/±2.5V) input ranges & ALARM on +5V supply ADS8685 — 16-Bit, 500-kSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8685W — 16-bit, 500-kSPS, one-channel, wide bandwidth SAR ADC with programmable input ranges on +5V supply ADS8686S — 16-channel 16-bit 1-MSPS dual simultaneous-sampling ADC with integrated analog front end (AFE) ADS8688 — 16-bit, 500kSPS 8-channel single-supply SAR ADC with bipolar input ranges ADS8688A — 16-bit, 500kSPS 8-channel SAR ADC with bipolar inputs using 5V supply and low-drift VREF ADS8688AT — 16-bit, 500kSPS 8-channel SAR ADC with bipolar inputs using 5V low-drift VREF and wide temp range ADS8689 — 16-Bit, 100-kSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8689W — 16-bit, 100-kSPS, one-channel, wide bandwidth SAR ADC with programmable input ranges on +5V supply ADS8691 — 18-Bit, 1-MSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8694 — 18-Bit 500kSPS 4-Channel SAR ADC With Bipolar Inputs Off 5V Supply ADS8695 — 18-Bit, 500-kSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8698 — 18-Bit 500kSPS 8-Channel SAR ADC With Bipolar Inputs Off 5V Supply ADS8699 — 18-Bit, 100-kSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply ADS8860 — 16-bit, 1-MSPS, 1-channel SAR ADC with single-ended input, SPI and daisy chain ADS8861 — 16-Bit, 1-MSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8862 — 16-Bit, 680-kSPS, 1-Ch SAR ADC with Single-Ended Input, SPI Interface and Daisy-Chain ADS8863 — 16-Bit, 680-kSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8864 — 16-Bit, 400-kSPS, 1-Ch SAR ADC with Single-Ended Input, SPI Interface and Daisy-Chain ADS8865 — 16-Bit, 400-kSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8866 — 16-Bit, 100-kSPS, 1-Ch SAR ADC with Single-Ended Input, SPI Interface and Daisy-Chain ADS8867 — 16-Bit, 100-kSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8881 — 18-Bit, 1-MSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8883 — 18-Bit, 680-kSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8885 — 18-Bit, 400-kSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8887 — 18-Bit, 100-kSPS, 1-Ch SAR ADC with True-Differential Input, SPI Interface and Daisy-Chain ADS8900B — 20-bit, 1-MSPS, one-channel SAR ADC with internal VREF buffer, internal LDO and enhanced SPI ADS8902B — 20-bit, 500-kSPS, one-channel SAR ADC with internal VREF buffer, internal LDO and enhanced SPI ADS8904B — 20-bit, 250-kSPS, one-channel SAR ADC with internal VREF buffer, internal LDO and enhanced SPI ADS8910B — 18-Bit, 1-MSPS, 1-Ch SAR ADC with Internal VREF Buffer, Internal LDO and Enhanced SPI Interface ADS8912B — 18-Bit, 500-kSPS, 1-Ch SAR ADC with Internal VREF Buffer, Internal LDO and Enhanced SPI Interface ADS8914B — 18-Bit, 250-kSPS, 1-Ch SAR ADC with Internal VREF Buffer, Internal LDO and Enhanced SPI Interface ADS8920B — 16-bit, 1-MSPS, one-channel SAR ADC with internal VREF buffer, internal LDO and enhanced SPI ADS8922B — 16-bit, 500-kSPS, one-channel SAR ADC with internal VREF buffer, internal LDO and enhanced SPI ADS8924B — 16-bit, 250-kSPS, one-channel SAR ADC with internal VREF buffer, internal LDO and enhanced SPI ADS9110 — 18-bit, 2-MSPS, one-channel SAR ADC with enhanced serial peripheral interface (SPI) ADS9117 — 18-bit 5MSPS SAR ADC with ADC driver and reference rriver in 6mm x 6mm QFN ADS9118 — 18-bit 10MSPS SAR ADC with ADC driver and reference driver in 6mm x 6mm QFN ADS9119 — 18-bit 20MSPS SAR ADC with ADC driver and reference driver in 6mm x 6mm QFN ADS9120 — 16-Bit, 2.5-MSPS, 1-Ch SAR ADC with Enhanced SPI Interface ADS9127 — 16-bit 5MSPS SAR ADC with ADC driver and deference driver in 6mm x 6mm QFN ADS9128 — 16-bit 10MSPS SAR ADC with ADC driver and reference driver in 6mm x 6mm QFN ADS9129 — 16-bit 20MSPS SAR ADC with ADC driver and reference driver in 6mm x 6mm QFN ADS9212 — 18-bit, 8MSPS, dual simultaneous-sampling ADC with integrated analog ADS9217 — Two-channel, simultaneous-sampling, 18-bit 5-MSPS SAR ADC with fully-differential ADC input driver ADS9218 — Two-channel, simultaneous-sampling, 18-bit 10-MSPS SAR ADC with fully-differential ADC input driver ADS9219 — 2-channel, 18-bit, 20 Msps/channel, with ADC driver and reference driver in 6mm x 6mm QFN ADS9224R — 16-bit, 3-MSPS, dual-channel, simultaneous-sampling SAR ADC with internal reference and enhanced SPI ADS9226 — 16-bit, 2.048-MSPS, dual-channel, simultaneous-sampling SAR ADC with enhanced SPI ADS9227 — Two-channel, simultaneous-sampling, 16-bit 5-MSPS SAR ADC with fully-differential ADC input driver ADS9228 — Two-channel, simultaneous-sampling, 16-bit 10-MSPS SAR ADC with fully-differential ADC input driver ADS9229 — Two-channel, simultaneous-sampling, 16-bit 20MSPS SAR ADC with fully-differential ADC input drive ADS9234R — 14-bit, 3.5-MSPS, dual, simultaneous-sampling SAR ADC with internal reference and enhanced SPI ADS9326 — Two-channel, simultaneous-sampling, 16-bit 3MSPS SAR ADC in small package ADS9327 — Two-channel, simultaneous-sampling, 16-bit 5MSPS SAR ADC in small package ADS9803 — 20-bit eight-channel 2 MSPS per channel simultaneous sampling ADC with programmable gain amplifier ADS9810 — 8-channel, 18-bit, 1MSPS, ±16 ppm INL simultaneous sampling ADC with integrated front end ADS9811 — 8-channel, 18-bit, 1MSPS simultaneous sampling ADC with integrated analog front end ADS9813 — Eight-channel, 18-bit, 2-MSPS/ch simultaneous sampling ADC with integrated analog front end ADS9815 — Eight-channel, 18-bit, 1-MSPS/ch dual simultaneous-sampling ADC with integrated analog front end ADS9817 — Eight-channel, 18-bit, 2-MSPS/ch dual simultaneous-sampling ADC with integrated analog front end
Biosensing AFEs
ADS1191 — 16-bit, 1-ch, Low-Power Analog Front END (AFE) for ECG Applications ADS1192 — 16-bit, 2-ch, Low-Power Analog Front END (AFE) for ECG Applications ADS1194 — Low-Power, 4-Channel, 16-Bit Analog Front-End for ECG ADS1196 — Low-Power, 6-Channel, 16-Bit Analog Front-End for ECG ADS1198 — Low-Noise, 8 Channel, 16 Bit Analog Front End for ECG/EEG Measurements ADS1291 — 24-bit, 1-ch, Low-Power Analog Front END (AFE) for ECG Applications ADS1292 — 24-bit, 2-ch, Low-Power Analog Front END (AFE) for ECG Applications ADS1292R — 2-Channel 24-Bit ADC With Integrated Respiration Impedance and ECG Front End ADS1293 — 24-bit, 3-ch, Low-Power Analog Front END (AFE) for ECG Applications ADS1294 — 4-Channel 24-Bit ADC With Integrated ECG Front End ADS1294R — 4-Channel 24-Bit ADC With Integrated Respiration Impedance and ECG Front End ADS1296 — 6-Channel 24-Bit ADC With Integrated ECG Front End ADS1296R — 6-Ch 24-Bit ADC With Integrated Respiration Impedance and ECG Front End ADS1298 — 8-Channel 24-bit ADC With Integrated ECG Front End ADS1298R — 24-Bit 8-Ch Analog Front-End With Integrated Respiration Impedance for ECG ADS1299 — Low-Noise, 8-Channel, 24-Bit Analog-to-Digital Converter for Biopotential Measurements ADS1299-4 — Low-Noise, 4-Channel, 24-Bit Analog-to-Digital Converter for Biopotential Measurements ADS1299-6 — Low-noise, 6-channel, 24-bit analog-to-digital converter for biopotential measurements
High-speed ADCs (≥10 MSPS)
ADS2806 — Dual-Channel, 12-Bit, 32-MSPS Analog-to-Digital Converter (ADC) ADS2807 — Dual-Channel, 12-Bit, 50-MSPS Analog-to-Digital Converter (ADC) ADS4122 — 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS4125 — 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS4126 — 12-Bit, 160-MSPS Analog-to-Digital Converter (ADC) ADS4128 — 12-Bit, 200-MSPS Analog-to-Digital Converter (ADC) ADS4129 — 12-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS4142 — 14-bit, 65 MSPS, Analog-to-Digital Converter (ADC) ADS4145 — 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS4146 — 14-Bit, 160-MSPS Analog-to-Digital Converter (ADC) ADS4149 — 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS41B25 — 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS41B29 — 12-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS41B49 — 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS4222 — Dual-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS4225 — Dual-Channel, 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS4226 — Dual-Channel, 12-Bit, 160-MSPS Analog-to-Digital Converter (ADC) ADS4229 — Dual-Channel, 12-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS4242 — Dual-Channel, 14-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS4245 — Dual-Channel, 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS4245-EP — Dual-Channel, 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC)- Enhanced Product ADS4246 — Dual-Channel, 14-Bit, 160-MSPS Analog-to-Digital Converter (ADC) ADS4249 — Dual-Channel, 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS42B49 — Dual-Channel, 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS42JB46 — Dual-Channel, 14-Bit, 160-MSPS Analog-to-Digital Converter (ADC) ADS42JB49 — Dual-Channel, 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS42JB69 — Dual-Channel, 16-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS42LB49 — Dual-Channel, 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS42LB69 — Dual-Channel, 16-Bit 250-MSPS Analog-to-Digital Converter (ADC) ADS4449 — Quad-Channel, 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS5121 — Eight-Channel, 10-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS5204-Q1 — Dual-Channel, 10-Bit, 40-MSPS Analog-to-Digital Converter - Qualified for Automotive Applications ADS5231 — Dual-Channel, 12-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS5232 — Dual-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS5237 — Dual-Channel, 10-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS5240 — Quad-Channel, 12-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS5242 — Quad-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS5263 — Quad-Channel, 16-Bit, 100-MSPS Analog-to-Digital Converter (ADC) ADS5270 — Eight-Channel, 12-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS5271 — Eight-Channel, 12-Bit, 50-MSPS Analog-to-Digital Converter (ADC) ADS5272 — Eight-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS5273 — Eight-Channel, 12-Bit, 70-MSPS Analog-to-Digital Converter (ADC) ADS5277 — Eight-Channel, 10-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS5281 — Eight-Channel, 12-Bit, 50-MSPS Analog-to-Digital Converter (ADC) ADS5282 — Eight-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS5287 — Eight-Channel, 10-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS5292 — Eight-Channel, 12-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS5294 — Eight-Channel, 14-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS5295 — Octal Channel 12-Bit, 100MSPS High-SNR and Low-Power ADC ADS5296A — 10-Bit, 200-MSPS, 4 or 8-Channel / 12-Bit, 80-MSPS, 8-Channel ADC ADS52J65 — 8-channel 16-bit 125-MSPS analog-to-digital converter (ADC) with JESD204B interface ADS52J66 — 8-channel 14-bit 125-MSPS analog-to-digital converter (ADC) with JESD204B interface ADS52J90 — 14-bit multichannel low-power high-speed analog-to-digital converter (ADC) ADS52J91 — 10-bit, 12-bit, and 14-bit, multichannel, low-power ADC with LVDS and JESD outputs ADS5400 — 12-bit 1-GSPS analog-to-digital converter (ADC) ADS5400-SP — QMLV, 50-krad, ceramic, 12-bit, single-channel, 1-GSPS ADC ADS5401 — 12-Bit, 800-MSPS Analog-to-Digital Converter (ADC) ADS5402 — Dual-Channel, 12-Bit, 800-MSPS Analog-to-Digital Converter (ADC) ADS5403 — 12-Bit, 500-MSPS Analog-to-Digital Converter (ADC) ADS5404 — Dual-Channel, 12-Bit, 500-MSPS Analog-to-Digital Converter (ADC) ADS5407 — Dual-Channel, 12-Bit, 500-MSPS Analog-to-Digital Converter (ADC) ADS5409 — Dual-Channel, 12-Bit, 900-MSPS Analog-to-Digital Converter (ADC) ADS5411 — 11-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS5413 — 12-Bit, 65-MSPS, 1.0-GHz Input Bandwidth Analog-to-Digital Converter (ADC) ADS5421 — 14-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS5422 — 14-Bit, 62-MSPS Analog-to-Digital Converter (ADC) ADS5423 — 14-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS5424 — 14-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS5424-SP — QMLV, 150-krad, ceramic, 14-bit, single-channel, 125-MSPS ADC ADS5440 — 13-Bit, 210-MSPS Analog-to-Digital Converter (ADC) ADS5440-EP — 13-Bit, 210-MSPS Analog-to-Digital Converter (ADC) - Enhanced-Product ADS5444 — 13-bit 250-MSPS analog-to-digital converter (ADC) ADS5444-EP — 13-bit 250-MSPS analog-to-digital converter (ADC) - enhanced product ADS5444-SP — QMLV, ceramic, 13-bit, single-channel, 250-MSPS ADC ADS5463 — 12-bit 500-MSPS analog-to-digital converter (ADC) ADS5463-EP — 12-bit 500-MSPS analog-to-digital converter (ADC) - enhanced product ADS5463-SP — Radiation-hardness-assured (RHA), QMLV, 100-krad, ceramic, 12-bit, single, 500-MSPS ADC ADS5474 — 14-bit 400-MSPS analog-to-digital converter (ADC) ADS5474-SP — Radiation-hardness-assured (RHA), QMLV, 100-krad, ceramic, 14-bit, single, 400-MSPS ADC ADS5481 — 16-bit, 80-MSPS analog-to-digital converter (ADC) with high SFDR and LVDS outputs ADS5482 — 16-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS5483 — 16-Bit, 135-MSPS Analog-to-Digital Converter (ADC) ADS5484 — 16-Bit, 170-MSPS Analog-to-Digital Converter (ADC) ADS5485 — 16-Bit, 200-MSPS Analog-to-Digital Converter (ADC) ADS54J20 — Dual-Channel, 12-Bit, 1.0-GSPS Analog-to-Digital Converter (ADC) ADS54J40 — Dual-Channel, 14-Bit, 1.0-GSPS Analog-to-Digital Converter (ADC) ADS54J42 — Dual-Channel, 14-Bit, 625-MSPS Analog-to-Digital Converter (ADC) ADS54J54 — Quad-Channel, 14-Bit, 500-MSPS Analog-to-Digital Converter (ADC) ADS54J60 — Dual-Channel, 16-Bit, 1.0-GSPS Analog-to-Digital Converter (ADC) ADS54J64 — Quad-Channel, 14-Bit, 1-GSPS, 2x-Oversampling Analog-to-Digital Converter (ADC) ADS54J66 — Quad-Channel, 14-Bit, 500-MSPS Analog-to-Digital Converter (ADC) ADS54J69 — Dual-Channel, 16-Bit, 500-MSPS Analog-to-Digital Converter (ADC) ADS54RF63 — 12-Bit, 550-MSPS, RF Sampling Analog-to-Digital Converter (ADC) ADS5500 — 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS5500-EP — 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC)- Enhanced Product ADS5510 — 11-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS5517 — 11-Bit, 200-MSPS Analog-to-Digital Converter (ADC) ADS5520 — 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS5521 — 12-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS5522 — 12-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS5525 — 12-Bit, 170-MSPS Analog-to-Digital Converter (ADC) ADS5527 — 12-Bit, 210-MSPS Analog-to-Digital Converter (ADC) ADS5541 — 14-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS5542 — 14-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS5545 — 14-Bit, 170-MSPS Analog-to-Digital Converter (ADC) ADS5546 — 14-Bit, 190-MSPS Analog-to-Digital Converter (ADC) ADS5547 — 14-Bit, 210-MSPS Analog-to-Digital Converter (ADC) ADS5553 — Dual-Channel, 14-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS5560 — 16-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS5562 — 16-bit, 80-MSPS analog-to-digital converter (ADC) with high SNR and CMOS/LVDS outputs ADS58B18 — 11-Bit, 200-MSPS Analog-to-Digital Converter (ADC) ADS58B19 — 9-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS58C28 — Dual-Channel, 11-Bit, 200-MSPS Analog-to-Digital Converter (ADC) ADS58C48 — Quad-Channel, 11-Bit, 200-MSPS Analog-to-Digital Converter (ADC) ADS6122 — 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS6123 — 12-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS6124 — 12-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS6125 — 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS6128 — 12-Bit, 210-MSPS Analog-to-Digital Converter (ADC) ADS6129 — 12-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS6142 — 14-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS6143 — 14-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS6144 — 14-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS6145 — 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS6148 — 14-Bit, 210-MSPS Analog-to-Digital Converter (ADC) ADS6149 — 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS61B23 — 12-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS61B29 — 12-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS61B49 — 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS61JB23 — 12-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS61JB46 — 14-Bit, 160-MSPS Analog-to-Digital Converter (ADC) ADS6222 — Dual-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS6224 — Dual-Channel, 12-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS6225 — Dual-Channel, 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS6242 — Dual-Channel, 14-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS6243 — Dual-Channel, 14-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS6244 — Dual-Channel, 14-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS6245 — Dual-Channel, 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS62C15 — Dual-Channel, 11-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS62C17 — Dual-Channel, 11-Bit, 200-MSPS Analog-to-Digital Converter (ADC) ADS62P15 — Dual-Channel, 11-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS62P19 — Dual-Channel, 11-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS62P22 — Dual-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS62P23 — Dual-Channel, 12-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS62P24 — Dual-Channel, 12-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS62P25 — Dual-Channel, 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS62P28 — Dual-Channel, 12-Bit, 210-MSPS Analog-to-Digital Converter (ADC) ADS62P29 — Dual-Channel, 12-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS62P42 — Dual-Channel, 14-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS62P43 — Dual-Channel, 14-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS62P44 — Dual-Channel, 14-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS62P45 — Dual-Channel, 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS62P48 — Dual-Channel, 14-Bit, 210-MSPS Analog-to-Digital Converter (ADC) ADS62P49 — Dual-Channel, 14-Bit, 250-MSPS Analog-to-Digital Converter (ADC) ADS6422 — Quad-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS6423 — Quad-Channel, 12-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS6424 — Quad-Channel, 12-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS6425 — Quad-Channel, 12-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS6442 — Quad-Channel, 14-Bit, 65-MSPS Analog-to-Digital Converter (ADC) ADS6443 — Quad-Channel, 14-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS6444 — Quad-Channel, 14-Bit, 105-MSPS Analog-to-Digital Converter (ADC) ADS6444-EP — Quad-Channel, 14-Bit, 105-MSPS Analog-to-Digital Converter (ADC) - Enhanced-Product ADS6445 — Quad-Channel, 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) ADS6445-EP — Quad-Channel, 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC) - Enhanced-Product ADS800 — 12-Bit, 40 MSPS ADC SE/Diff inputs. Internal References, pin compatible to ADS801/2 ADS801 — 12-Bit, 25 MSPS ADC SE/Diff inputs. Internal References, pin compatible to ADS800/2 ADS802 — 12-Bit, 10-MSPS Analog-to-Digital Converter (ADC) ADS803 — 12-Bit, 5-MSPS Analog-to-Digital Converter (ADC) ADS804 — 12-Bit, 10-MSPS Analog-to-Digital Converter (ADC) ADS805 — 12-Bit, 20-MSPS Analog-to-Digital Converter (ADC) ADS807 — 12-Bit, 53-MSPS Analog-to-Digital Converter (ADC) ADS808 — 12-Bit, 70-MSPS Analog-to-Digital Converter (ADC) ADS820 — 10-Bit, 20-MSPS Analog-to-Digital Converter (ADC) ADS821 — 10-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS822 — 10-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS825 — 10-Bit, 40-MSPS Analog-to-Digital Converter (ADC) ADS828 — 10-Bit, 75-MSPS Analog-to-Digital Converter (ADC) ADS830 — 8-Bit, 60-MSPS Analog-to-Digital Converter (ADC) ADS831 — 8-Bit, 80-MSPS Analog-to-Digital Converter (ADC) ADS850 — 14-Bit, 10-MSPS Analog-to-Digital Converter (ADC) ADS900 — 10-Bit, 20-MSPS Analog-to-Digital Converter (ADC) ADS901 — 10-Bit, 20-MSPS Analog-to-Digital Converter (ADC) ADS930 — 8-Bit, 30 MSPS ADC SE/Diff Inputs w/ Internal Ref. and Low Power, Powerdown
Difference amplifiers
INA105 — Precision Unity Gain Differential Amplifier INA106 — Precision Fixed-Gain Differential Amplifier INA117 — High Common-Mode Voltage Difference Amplifier INA132 — Low Power, Single-Supply Difference Amplifier INA133 — 1.5-MHz, 450-µV offset, 0.95-mA power, precision difference amplifier INA143 — High speed (5-V/µs), 250-µV offset, G= 10 or G= 0.1 precision difference amplifier INA145 — Programmable Gain Difference Amplifier INA146 — High-Voltage, Programmable Gain Difference Amplifier INA148 — +-200V Common-Mode Voltage Difference Amplifier INA148-Q1 — Automotive +-200V Common-Mode Voltage Difference Amplifier INA149 — High Common Mode Voltage Difference Amplifier INA149-EP — Enhanced Product High Common Mode Voltage Difference Amplifier INA152 — Single-Supply Difference Amplifier INA154 — High-Speed, Precision Difference Amplifier (G = 1) INA157 — High-Speed, Precision Difference Amplifier INA159 — High-Speed, Precision Gain of 0.2 Level Translation Difference Amplifier INA159-EP — Enhanced Product Precision, Gain of 0.2 Level Translation Difference Amplifier INA1H94-SP — Radiation-hardness-assured (RHA) high common-mode voltage difference amplifier INA2132 — Dual, Low Power, Single-Supply Difference Amplifier INA2133 — Dual 1.5-MHz, 450-µV offset, 0.95-mA power, precision difference amplifier INA2143 — Dual high-speed (5-V/µs), 250-µV offset, g= 10 or g= 0.1 precision difference amplifier INA500 — Low-power, greater than 1MΩ RIN, 13.5µA Iq small-size attenuating difference amplifier INA592 — High-precision (40-µV offset), 2-MHz, 88-dB CMRR, low-power, e-trim™ difference amplifier INA597 — Precision (200µV offset), 2MHz, 88 dB CMRR, low power, e-trim™ difference amplifier INA600 — 40V, wide common-mode voltage (-40V to 85V) difference amplifier with fixed attenuation ratios
Instrumentation amplifiers
INA101 — Very High Accuracy Instrumentation Amplifier INA103 — Low Noise, Low Distortion Instrumentation Amplifier INA110 — Fast-Settling FET-Input Very High Accuracy Instrumentation Amplifier INA111 — High Speed FET-Input Instrumentation Amplifier INA114 — 1-MHz, 50-μV, 11-nV/√Hz, 3mA-power, precision instrumentation amplifier INA115 — 1-MHz, 50-μV, 11-nV/√Hz, 3mA-power, switched gain enabled precision instrumentation amplifier INA116 — Ultra Low Input Bias Current Instrumentation Amplifier INA118 — Precision, Low Power Instrumentation Amplifier INA121 — FET-Input, Low Power Instrumentation Amplifier INA122 — Single Supply, MicroPower Instrumentation Amplifier INA125 — Instrumentation Amplifier with Precision Voltage Reference INA126 — 36V microPower (175-µA), 250-µV offset, precision instrumentation amplifier INA128 — Precision, 130-dB CMRR, 700-µA, Low-Power, Instrumentation Amplifier INA128-HT — High Temperature Precision Low Power Instrumentation Amplifiers. INA129 — Precision, Low Power Instrumentation Amplifiers INA129-EP — Enhanced Product Precision, Low Power Instrumentation Amplifiers INA129-HT — High Temperature Precision, Low Power Instrumentation Amplifiers INA131 — Precision G = 100 Instrumentation Amplifier INA141 — Precision, Low Power, G = 10, 100 Instrumentation Amplifier INA155 — 5.5-V single-Supply, 550-KHz (G=10), 6.5-V/µs slew rate, 1-mV offset, RRO, CMOS instrumentation a INA156 — 5.5-V single-supply, 550-kHz (G=10), 6.5-V/µs slew rate, 8-mV offset, RRO, CMOS instrumenta INA163 — Low-Noise Low-Distortion Instrumentation Amplifier INA166 — Low-Noise, Low-Distortion, G=2000 Instrumentation Amplifier INA188 — 36-V, Zero-Drift, Rail-to-Rail-Out Instrumentation Amplifier INA2126 — Dual 36-V micropower (175-µA), 250-µV offset, precision instrumentation amplifier INA2128 — Dual, Low Power Instrumentation Amplifier INA2141 — Dual, Low Power, G = 10, 100 Instrumentation Amplifier INA217 — Low Noise, Low-Distortion Instrumentation Amplifier Replacement for SSM2017 INA2321 — Dual micropower (40-µA) plus shutdown, 500-µV offset, 10-pA bias, RRO instrumentation amp INA2331 — Low-power, single-supply, CMOS, instrumentation amplifier INA2332 — Low-Power, Single-Supply, CMOS Instrumentation Amplifiers INA317 — Micro-power (50µA), zero-drift (75µV offset, 0.3µV/˚C), precision RRO instrumentation amplifier INA321 — Micropower (40-µA) plus shutdown, 500-µV offset, 10-pA bias, RRO instrumentation amp INA322 — Micropower (40-µA) plus shutdown, 2-mV offset, 10-pA bias, RRO instrumentation amp INA326 — Precision, Low Drift, CMOS Instrumentation Amplifier INA327 — Precision, Low Drift, CMOS Instrumentation Amplifier with Shutdown INA330 — Thermistor Signal Amplifier for Temperature Control INA331 — Low-Power, Single Supply, CMOS, Instrumentation Amplifier INA332 — Low-power, single-supply, CMOS, low-cost, instrumentation amplifier INA333 — Low-Power, Zero-Drift, Precision Instrumentation Amplifier INA333-HT — High Temperature Low Power, Precision Instrumentation Amplifier INA333-Q1 — Automotive low-power, zero-drift, precision instrumentation amplifier INA337 — Wide-Temperature, Precision Instrumentation Amplifier INA338 — Wide-Temperature, Precision Instrumentation Amplifier with Shutdown INA350 — Low-power (100 µA) selectable-gain instrumentation amplifier available in 8-pin WSON (2 mm by 2 mm) INA351 — Tiny (1.5-mm × 2-mm) low-power (110 µA) instrumentation amplifier with integrated reference buffer INA351A — Low-power (110 µA) instrumentation amplifier with integrated reference amp to enable calibration INA630 — Precision, low-power, indirect current feedback instrumentation amplifier INA818 — Low power (350-µA), precision instrumentation amp with ±60-V overvoltage protection (gain pins 1, 8) INA819 — Low power (350-µA), precision instrumentation amp with ±60-V overvoltage protection (gain pins 2, 3) INA821 — High bandwidth (4.7MHz), low noise (7nV/√Hz), precision (35μV), low-power, instrumentation amp INA823 — Precision (100 µV), low-power (250 µA), wide-supply (2.7 V to 36 V), instrumentation amplifier INA826 — Precision, 200-μA Supply Current, 36-V Supply Instrumentation Amplifier INA826S — 200 μA, 36V, Rail-to-Rail Out Instrumentation Amplifier with Shutdown INA827 — Precision, G>5, 200uA, 2.7-V to 36-V Supply Instrumentation Amplifier INA828 — 50-μV Offset, 7-nV/√Hz Noise, Low-Power, Precision Instrumentation Amplifier INA848 — Ultra-low-noise, high-bandwidth instrumentation amplifier with fixed gain of 2000 INA849 — Ultra-low noise (1 nV/√Hz), high-speed (28 MHz, 35 V/μs) precision (35 μV) instrumentation amplifier INA851 — Low-noise (3.2 nV/√Hz) high-speed (22 MHz) fully-differential instrumentation amp with OVP (±40 V)
Analog current-sense amplifiers
INA138 — 2.7 to 36V, 800kHz Variable gain current sense amplifier INA138-Q1 — AEC-Q100, 2.7 to 36V, 800kHz Variable gain current sense amplifier INA139 — 2.7 to 36V, 440kHz Variable gain current sense amplifier INA139-Q1 — AEC-Q100, 2.7 to 36V, 440kHz Variable gain current sense amplifier INA168 — 2.7 to 60V, 800kHz Variable gain current sense amplifier INA168-Q1 — AEC-Q100, 2.7 to 60V, 800kHz Variable gain current sense amplifier INA169 — 2.7 to 60V, 440kHz Variable gain current sense amplifier INA169-Q1 — AEC-Q100, 2.7 to 60V, 440kHz Variable gain current sense amplifier INA170 — 2.7 to 60V, bi-directional, 400kHz Variable gain current sense amplifier INA180 — 26V, 350kHz current sense amplifier INA180-Q1 — AEC-Q100, 26V, 350kHz current sense amplifier INA181 — 26-V bi-directional 350-kHz current-sense amplifier INA181-Q1 — AEC-Q100, 26V, bi-directional, 350kHz current sense amplifier INA183 — 2.7-V to 26-V, high-precision current sense amplifier with input supply INA185 — 26-V, 350-kHz, bi-directional, high-precision current sense amplifier in ultra-small SOT-563 package INA185-Q1 — AEC-Q100, 26-V, 350-kHz, bi-directional, high-precision current sense amplifier INA186 — 40-V, bidirectional, high-precision current sense amplifier with picoamp input bias & ENABLE INA186-Q1 — AEC-Q100, 40-V, bidirectional, high-precision current sense amplifier w/ picoamp input bias & ENABLE INA187 — -2V to 40V, bidirectional 650 kHz precise current-sense amplifier INA187-Q1 — AEC-Q100 qualified, -2V to 40V, bidirectional 650kHz precise current-sense amplifier INA190 — 40-V, bidirectional, ultraprecise current sense amplifier with picoamp IB & ENABLE INA190-EP — Enhanced product, 40-V, bidirectional, ultraprecise current sense amplifier with picoamp IB & EN INA190-Q1 — AEC-Q100, 40V, bi-directional, ultra-precise current sense amplifier w/picoamp IB & ENABLE INA191 — 40V, ultra-precise current sense amplifier with ENABLE and picoamp IB in WCSP INA193 — -16 to 80V, 500kHz current sense amplifier INA193A-EP — Enhanced product, -16 to 80V, 500-kHz current sense amplifier INA193A-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier INA194 — -16 to 80V, 500kHz current sense amplifier INA194A-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier INA195 — -16 to 80V, 500kHz current sense amplifier INA195A-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier INA196 — -16 to 80V, 500kHz current sense amplifier INA196A-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier INA197 — -16 to 80V, 500kHz current sense amplifier INA197A-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier INA198 — -16 to 80V, 500kHz current sense amplifier INA198A-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier INA199 — 26V, bi-directional current sense amplifier INA199-Q1 — AEC-Q100, 26V, bi-directional current sense amplifier INA200 — -16 to 80V, 500kHz current sense amplifier w/ comparator INA200-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier w/ comparator INA201 — -16 to 80V, 500kHz current sense amplifier w/ comparator INA201-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier w/ comparator INA202 — -16 to 80V, 500kHz current sense amplifier w/ comparator INA202-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier w/ comparator INA203 — -16 to 80V, 500kHz current sense amplifier w/ dual comparators INA203-Q1 — AEC-Q100, -16 to 80V, 500kHz current sense amplifier w/ dual comparators INA204 — -16 to 80V, 500kHz current sense amplifier w/ dual comparators INA205 — -16 to 80V, 500kHz current sense amplifier w/ dual comparators INA206 — -16 to 80V, 500kHz current sense amplifier w/ window comparator INA207 — -16 to 80V, 500kHz current sense amplifier w/ window comparator INA208 — -16 to 80V, 500kHz current sense amplifier w/ window comparator INA210 — 26V, bi-directional, high-precision current sense amplifier INA210-Q1 — AEC-Q100, 26V, bi-directional, high-precision current sense amplifier INA211 — 26V, bi-directional, high-precision current sense amplifier INA211-Q1 — AEC-Q100, 26V, bi-directional, high-precision current sense amplifier INA212 — 26V, bi-directional, high-precision current sense amplifier INA212-Q1 — AEC-Q100, 26V, bi-directional, high-precision current sense amplifier INA213 — 26V, bi-directional, high-precision current sense amplifier INA213-Q1 — AEC-Q100, 26V, bi-directional, high-precision current sense amplifier INA214 — 26V, bi-directional, high-precision current sense amplifier INA214-Q1 — AEC-Q100, 26V, bi-directional, high-precision current sense amplifier INA215 — 26V, bi-directional, high-precision current sense amplifier INA215-Q1 — AEC-Q100, 26V, bi-directional, high-precision current sense amplifier INA216 — 1.8 to 5.5V, high-precision current sense amplifier in wcsp INA2180 — 26V, dual channel, 350kHz current sense amplifier INA2180-Q1 — AEC-Q100, 26V, dual channel, 350kHz current sense amplifier INA2181 — 26V, dual channel, bi-directional, 350kHz current sense amplifier INA2181-Q1 — AEC-Q100, 26V, dual channel, bi-directional, 350kHz current sense amplifier INA2191 — 40-V, dual-channel, bidirectional, ultraprecise current sense amp w/ picoamp IB & ENABLE in wcsp INA223 — 26V, programmable-gain current sense amplifier & analog power monitor INA225 — 36V, bi-directional current sense amplifier w/ four pin-selectable gain settings INA225-Q1 — AEC-Q100, 36V, bi-directional current sense amplifier w/ four pin-selectable gain settings INA2290 — Dual-channel, 2.7-V to 120-V, 1.1-MHz, ultra-precise current sense amplifier INA240 — -4 to 80V, bidirectional, ultra-precise current sense amplifier with enhanced PWM rejection INA240-Q1 — AEC-Q100, -4 to 80V, bi-directional, ultra-precise current sense amplifier w/ enhanced pwm rejection INA241A — -5-V to 110-V bidirectional ultraprecise current sense amplifier with enhanced PWM rejection INA241A-Q1 — AEC-Q100, -4V to 110V bidirectional ultraprecise current sense amplifier with enhanced PWM rejection INA241B — -5-V to 110-V bidirectional high-precision current sense amplifier with enhanced PWM rejection INA241B-Q1 — AEC-Q100, -4V to 110V bidirectional high-precision current sense amp with enhanced PWM rejection INA270 — -16 to 80V, split-stage current sense amplifier w/ in-line filter capability INA270A-Q1 — AEC-Q100, -16 to 80V, split-stage current sense amplifier w/ in-line filter capability INA271 — -16 to 80V, split-stage current sense amplifier w/ in-line filter capability INA271-HT — High temp, -16 to 80V, split-stage current sense amplifier w/ in-line filter capability INA271A-Q1 — AEC-Q100, -16 to 80V, split-stage current sense amplifier w/ in-line filter capability INA280 — 2.7-V to 120-V, 1.1-MHz, high-precision current sense amplifier in small (SC-70) package INA280-Q1 — AEC-Q100, 2.7-V to 120-V, 1.1-Mhz current sense amplifier in small (SC-70) package INA281 — -4-V to 110-V, 1.3-MHz, high-precision current sense amplifier INA281-Q1 — AEC-Q100, -4-V to 110-V, 1.3-MHz current sense amplifier INA282 — -14 to 80V, bi-directional current sense amplifier INA282-Q1 — AEC-Q100, -14 to 80V, bi-directional current sense amplifier INA283 — -14 to 80V, bi-directional current sense amplifier INA283-Q1 — AEC-Q100, -14 to 80V, bi-directional current sense amplifier INA284 — -14 to 80V, bi-directional current sense amplifier INA284-Q1 — AEC-Q100, -14 to 80V, bi-directional current sense amplifier INA285 — -14 to 80V, bi-directional current sense amplifier INA285-Q1 — AEC-Q100, -14 to 80V, bi-directional current sense amplifier INA286 — -14 to 80V, bi-directional current sense amplifier INA286-Q1 — AEC-Q100, -14 to 80V, bi-directional current sense amplifier INA290 — 2.7 to 120V, 1.1MHz, ultra-precise current sense amplifier in small (SC-70) package INA290-Q1 — AEC-Q100, 2.7-V to 120-V, 1.1-MHz, ultra-precise current sense amplifier in small (SC-70) package INA293 — -4-V to 110-V, 1.3-MHz, ultra-precise current sense amplifier INA293-Q1 — AEC-Q100, -4-V to 110-V, 1.3-MHz, ultra-precise current sense amplifier INA296A — -5-V to 110-V, bidirectional, 1.1-MHz 8-V/µs ultraprecise current sense amplifier INA296A-Q1 — AEC-Q100, -5V to 110V, bidirectional, 1.1-MHz 8-V/µs ultraprecise current sense amplifier INA296B — -5-V to 110-V, bidirectional, 1.1-MHz 8-V/µs high-precision current sense amplifier INA296B-Q1 — AEC-Q100, -5V to 110V, bidirectional, 1.1-MHz 8-V/µs high-precision current sense amplifier INA299 — -2V to 80V, bidirectional 650 kHz precise current-sense amplifier INA299-Q1 — AEC-Q100 qualified, -2V to 80V, bidirectional 650kHz precise current-sense amplifier INA300 — 36V current sense comparator INA300-Q1 — AEC-Q100, 36V current sense comparator INA301 — 36V, 550kHz, 4V/µs, high-precision current sense amplifier w/ comparator INA301-Q1 — AEC-Q100, 36V, 550kHz, 4V/µs, high-precision current sense amplifier w/ comparator INA302 — 36V, bi-directional, 550kHz, 4V/µs, high-precision current sense amplifier w/ dual comparators INA302-Q1 — AEC-Q100, 36V, bi-directional, 550kHz, 4V/µs, high-precision current sense amp w/ dual comparators INA303 — 36V, bi-directional, 550kHz, 4V/µs, high-precision current sense amplifier w/ window comparator INA303-Q1 — AEC-Q100, 36V, bi-directional, 550kHz, 4V/µs, high-precision current sense amp w/ window comparator INA310A — -4-V to 110-V, 1.3-MHz, ultra-precise current-sense amplifier with comparator INA310A-Q1 — AEC-Q100 -4-V to 110-V 1.3-MHz ultra-precise current-sense amplifier with comparator and reference INA310B — -4-V to 110-V 1.3-MHz high-precision current-sense amplifier with comparator INA310B-Q1 — AEC-Q100 -4-V to 110-V 1.3-MHz high precision current-sense amplifier with comparator and reference INA381 — 26-V, 350-kHz current sense amplifier with integrated over-current comparator INA381-Q1 — AEC-Q100, 26-V, 350-kHz current sense amplifier with integrated overcurrent comparator INA4180 — 26V, quad channel, 350kHz current sense amplifier INA4180-Q1 — AEC-Q100, 26V, quad channel, 350kHz current sense amplifier INA4181 — 26V, quad channel, bi-directional, 350kHz current sense amplifier INA4181-Q1 — AEC-Q100, 26V, quad channel, bi-directional, 350kHz current sense amplifier INA4290 — Quad-channel, 120-V, high-voltage, high-bandwidth, unidirectional current sense amplifier INA901-SP — Radiation hardened, -15-V to 65-V, split-stage current sense amplifier with in-line filter option INA950-SEP — Space-enhanced-product, 2.7V to 80V, 1.1MHz, ultra-precise, current-sense amplifier
Digital power monitors
INA209 — 26V, 12-bit, i2c output current/voltage/power monitor w/ analog comparator INA219 — 26-V 12-bit I2C output digital power monitor INA220 — 26V, 12-bit, i2c output current/voltage/power monitor INA220-Q1 — AEC-Q100, 26V, 12-bit, i2c output current/voltage/power monitor INA2227 — Dual channel, 16-bit, current, voltage, power, and energy monitor with an I2C interface INA226 — 36V, 16-bit, ultra-precise i2c output current/voltage/power monitor w/alert INA226-Q1 — AEC-Q100, 36V, 16-bit, ultra-precise, i2c output current/voltage/power monitor w/alert INA228 — 85-V, 20-bit, ultra-precise, I2C output current/voltage/power/energy/charge monitor with alert INA228-Q1 — AEC-Q100, 85-V, 20-bit, ultraprecise, I²C output current/voltage/power/energy/charge monitor INA229 — 85-V, 20-bit, ultra-precise, SPI output current/voltage/power/energy/charge monitor with alert INA229-Q1 — AEC-Q100, 85-V, 20-bit, ultraprecise, SPI output current/voltage/power/energy/charge monitor INA230 — 36-V, 16-bit, I²C output current, voltage and power monitor with alert INA231 — 28V, 16-bit, i2c output current/voltage/power monitor w/alert in wcsp INA232 — 48-V, 16-bit high-precision I²C output digital power monitor with alert INA233 — 36V, 16-bit, ultra-precise i2c & pmbus output current/voltage/power/energy monitor w/alert INA234 — 28-V, 12-bit, I²C output current/voltage/power monitor with alert in WCSP INA236 — 48-V, 16-bit ultraprecise I²C output digital power monitor with alert in WCSP INA237 — 85-V, 16-bit, I2C output current/voltage/power monitor with alert INA237-Q1 — AEC-Q100, 85-V, 16-bit, I²C output current/voltage/charge monitor INA238 — 85-V, 16-bit, high-precision I2C output current/voltage/power monitor with alert INA238-Q1 — AEC-Q100, 85-V, 16-bit, high-precision, I²C output current/voltage/charge monitor INA239 — 85-V, 16-bit, high-precision, SPI output current/voltage/power monitor with alert INA239-Q1 — AEC-Q100, 85-V, 16-bit, high-precision, SPI output current/voltage/power monitor INA3221 — 26V, triple channel, 13-bit, i2c output current/voltage monitor w/alerts INA3221-Q1 — AEC-Q100, 26V, triple channel, 13-bit, i2c output current/voltage monitor w/alerts INA4230 — Quad channel, 16-bit, high-precision, current, voltage, power and energy monitor with I²C Interface INA4235 — Quad channel, 16-bit, ultra-precise, current, voltage, power and energy monitor with I²C Interface
Analog current-sense amplifiers with integrated shunt resistor
INA250 — 36V, bi-directional, precision current sense amplifier w/int. shunt resistor INA250-Q1 — AEC-Q100, 36V, bi-directional, precision current sense amplifier w/int. shunt resistor INA253 — 80V, bi-directional, precision current sense amp w/pwm rejection & int. shunt resistor INA253-Q1 — AEC-Q100, 80V, bi-directional, precision current sense amp w/pwm rejection & int. shunt resistor INA254 — 80-V, bidirectional ±75-A zero-drift current-sense amplifier with PWM rejection and shunt resistor INA750B — 110V, 35A integrated-shunt high-precision current-sense amplifier with enhanced PWM rejection INA790A — 110V, 75ARMS integrated shunt, ultra-precision current sense amplifier with enhanced PWM rejection INA790B — 110V, 75ARMS integrated-shunt high-precision current-sense amplifier with enhanced PWM rejection INA791A — 110V, 75ARMS integrated shunt, ultra-precision current sense amplifier with fast transient response
Digital power monitors with integrated shunt resistor
INA260 — 36V, 16-bit, precision i2c output current/voltage/power monitor w/ int. shunt resistor INA700 — 40-V 16-Bit I²C output digital power monitor in WCSP with EZShunt™ Technology INA701 — 40V 16-bit I²C-output digital power monitor in WCSP with 5mΩ EZShunt™ Technology INA740B — 85-V 16-bit I²C-output digital power monitor with 800-µΩ EZShunt™ Technology INA745A — 40V, 16-bit high-precision I²C-output digital power monitor with 800μΩ EZShunt™ Technology INA745A-Q1 — AEC-Q100 40V 16-bit high-precision I²C output digital power monitor with 800-µΩ EZShunt™ Technology INA745B — 40-V 16-bit I²C-output digital power monitor with 800-µΩ EZShunt™ Technology INA745B-Q1 — AEC-Q100, 40-V 16-bit I²C-output digital power monitor with 800-µΩ EZShunt™ Technology INA780B — 85-V 16-bit I²C-output digital power monitor with 400-µΩ EZShunt™ Technology
Die & wafer services
ADS1282-HT — High-temperature ultra-high-resolution delta-sigma ADC with PGA for seismic and energy exploration
RF receivers
ADS54T01 — 1-ch 750MSPS BTS Feedback and Receiver IC ADS54T02 — 2-ch 750MSPS BTS Feedback and Receiver IC ADS54T04 — 2-ch 500MSPS BTS Feedback and Receiver IC ADS58C20 — Dual Channel IF BTS Receiver with Signal Processing for multi-mode 3G+LTE+GSM ADS58C23 — Dual Channel IF BTS Receiver with Signal Processing for multi-mode 3G+LTE ADS58H40 — Quad-Channel, 14-Bit, 250-MSPS Receiver and Feedback IC ADS58H43 — Quad-Channel, 14-Bit, 250-MSPS Receiver and Feedback IC ADS58J89 — Quad 500MSPS Receiver and Feedback IC ADS62PF49 — Dual Channel 250MSPS Feedback Receiver IC
RF transmitters
ADS58J63 — Quad Channel 14-bit 500 Msps Telecom Receiver IC ADS58J64 — Quad-channel, 14-bit, 1-GSPS telecom receiver and feedback IC
Specialty audio amplifiers
INA134 — Single, Audio Differential Line Receivers, 0dB (G=1) INA137 — Single, Audio Differential Line Receivers, +-6dB (G=1/2 or 2) INA1650 — Dual SoundPlus™ high common-mode rejection (91-dB), low THD+N (-120-dB) differential line receiver INA1650-Q1 — Automotive, High Common-mode Rejection, Low Distortion Differential Audio Line Receiver INA1651 — Soundplus™ high common-mode rejection (91-dB), low THD+N (-120 dB) differential line receiver INA1651-Q1 — SoundPlus™ high common-mode rejection, low distortion differential line receiver for automotive INA2134 — Dual, audio differential line receivers, 0 dB (g=1) INA2134-EP — Enhanced Product Audio Differential Line Receiver 0dB (G = 1) INA2137 — Dual, audio differential line receivers, +-6 dB (g=1/2 or 2)
Audio ADCs
ADS7843 — 12-bit Analog-to-Digital Converter (ADC) with a synchronous serial interface and touch screen con ADS7843-Q1 — Automotive 4-wire Touch Screen Controller ADS7845 — 5-wire Touch Screen Controller ADS7846 — 4-wire Touch Screen Controller
Application-specific data converters|MRI
ADS52J67 — 4-channel 16-bit 125-MSPS analog-to-digital converter (ADC) with JESD204B interface ADS52J68 — 4-channel 14-bit 125-MSPS analog-to-digital converter (ADC) with JESD204B interface
Download
Calculation tool

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
Design now
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View Options
Package Pins CAD symbols, footprints & 3D models
WSON (DRG) 8 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos