Home Amplifiers Operational amplifiers (op amps) High-speed op amps (GBW ≥ 50 MHz)
Home
Amplifiers
Operational amplifiers (op amps)
High-speed op amps (GBW ≥ 50 MHz)

OPA2694

ACTIVE

Dual, Wideband, Low Power, Current Feedback Operational Amplifier

Order now
Data sheet

OPA2694

ACTIVE
Data sheet Order now

Product details

Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 1500 BW at Acl (MHz) 1500 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1700 Vn at flatband (typ) (nV√Hz) 2.1 Vn at 1 kHz (typ) (nV√Hz) 2.1 Iq per channel (typ) (mA) 5.8 Vos (offset voltage at 25°C) (max) (mV) 3.2 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 60 Input bias current (max) (pA) 22000000 Offset drift (typ) (µV/°C) 15 Iout (typ) (mA) 70 2nd harmonic (dBc) 85 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 1500 BW at Acl (MHz) 1500 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1700 Vn at flatband (typ) (nV√Hz) 2.1 Vn at 1 kHz (typ) (nV√Hz) 2.1 Iq per channel (typ) (mA) 5.8 Vos (offset voltage at 25°C) (max) (mV) 3.2 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 60 Input bias current (max) (pA) 22000000 Offset drift (typ) (µV/°C) 15 Iout (typ) (mA) 70 2nd harmonic (dBc) 85 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • UNITY GAIN STABLE BANDWIDTH: 1500MHz
  • HIGH GAIN OF 2V/V BANDWIDTH: 690MHz
  • LOW SUPPLY CURRENT: 5.8mA/ch
  • HIGH SLEW RATE: 1700V/µs
  • HIGH FULL-POWER BANDWIDTH: 670MHz
  • LOW DIFFERENTIAL GAIN/PHASE:
       0.03%/0.015°
  • APPLICATIONS
    • MEDICAL IMAGING
    • WIDEBAND VIDEO LINE DRIVER
    • DIFFERENTIAL RECEIVER
    • ADC DRIVER
    • HIGH-SPEED SIGNAL PROCESSING
    • PULSE AMPLIFIER
    • IMPROVED REPLACEMENT FOR OPA2658

All trademarks are the property of their respective owners.
  • UNITY GAIN STABLE BANDWIDTH: 1500MHz
  • HIGH GAIN OF 2V/V BANDWIDTH: 690MHz
  • LOW SUPPLY CURRENT: 5.8mA/ch
  • HIGH SLEW RATE: 1700V/µs
  • HIGH FULL-POWER BANDWIDTH: 670MHz
  • LOW DIFFERENTIAL GAIN/PHASE:
       0.03%/0.015°
  • APPLICATIONS
    • MEDICAL IMAGING
    • WIDEBAND VIDEO LINE DRIVER
    • DIFFERENTIAL RECEIVER
    • ADC DRIVER
    • HIGH-SPEED SIGNAL PROCESSING
    • PULSE AMPLIFIER
    • IMPROVED REPLACEMENT FOR OPA2658

All trademarks are the property of their respective owners.

The OPA2694 is a dual, ultra-wideband, low-power, current feedback operational amplifier featuring high slew rate and low differential gain/phase errors. An improved output stage provides ±70mA output drive with < 1.5V output voltage headroom. Low supply current with > 500MHz bandwidth meets the requirements of high density video routers. Being a current feedback design, the OPA2694 holds its bandwidth to very high gains—at a gain of 10, the OPA2694 will still provide > 200MHz bandwidth.

RF applications can use the OPA2694 as a low-power SAW pre-amplifier. Extremely high 3rd-order intercept is provided through 70MHz at much lower quiescent power than many typical RF amplifiers.

The OPA2694 is available in an industry-standard pinout in an SO-8 package.

The OPA2694 is a dual, ultra-wideband, low-power, current feedback operational amplifier featuring high slew rate and low differential gain/phase errors. An improved output stage provides ±70mA output drive with < 1.5V output voltage headroom. Low supply current with > 500MHz bandwidth meets the requirements of high density video routers. Being a current feedback design, the OPA2694 holds its bandwidth to very high gains—at a gain of 10, the OPA2694 will still provide > 200MHz bandwidth.

RF applications can use the OPA2694 as a low-power SAW pre-amplifier. Extremely high 3rd-order intercept is provided through 70MHz at much lower quiescent power than many typical RF amplifiers.

The OPA2694 is available in an industry-standard pinout in an SO-8 package.
filter Find other High-speed op amps (GBW ≥ 50 MHz)
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device.
OPA695 ACTIVE Ultra-Wideband, Current-Feedback Operational Amplifier with Disable Single channel, lower noise (1.8 nV/rtHz), wider BW ( 1.7 GHz), higher slew rate (4,300 V/us), and higher output current (120 mA)

Technical documentation

No results found. Please clear your search and try again.
View all 14
Top documentation Type Title Format options Date
* Data sheet Dual, Wideband, Low-Power, Current-Feedback Operational Amplifier datasheet (Rev. D) Apr 10, 2013
Technical article 3 common questions when designing with high-speed amplifiers PDF | HTML Jul 17, 2020
E-book The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML Mar 28, 2017
Application note RLC Filter Design for ADC Interface Applications (Rev. A) May 13, 2015
User guide DEM-OPA-SO-2C User's Guide (Rev. A) May 25, 2006
User guide DEM-OPA-SO-2B User's Guide (Rev. A) May 25, 2006
Analog design Journal Low-power, high-intercept interface to the ADS5424, 105-MSPS converter Oct 10, 2005
Analog design Journal Expanding the usability of current-feedback amplifiers Feb 28, 2005
Analog design Journal Active filters using current-feedback amplifiers Feb 25, 2005
Application note Noise Analysis for High Speed Op Amps (Rev. A) Jan 17, 2005
Application note Stabilizing Current-Feedback Op Amps While Optimizing Circuit Performance Apr 28, 2004
Application note ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers Apr 22, 2004
Application note Measuring Board Parasitics in High-Speed Analog Design Jul 7, 2003
Application note Current Feedback Amplifiers: Review, Stability Analysis, and Applications Nov 20, 2000

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DEM-OPA-SO-2B — Dual op amp evaluation module for SO-8 (non-inverting) package

The DEM-OPA-SO-2B demonstration fixture is a generic, unpopulated printed circuit board (PCB) for evaluating the operation and performance of TI's dual high-speed operational amplifiers in SO-8 (D) packages, in the non-inverting configuration.

Supported products & hardware
In stock
Limit:
??asset.out-of-stock-ti_en_US??
Not available
Simulation model

OPA694 PSpice Model (Rev. B)

SBOC068B.ZIP (22 KB) - PSpice model
Supported products & hardware
Simulation model

OPAy694 Family TINA-TI Reference Design (Rev. A)

SBOM446A.TSC (2316 KB) - TINA-TI reference design
Supported products & hardware
Simulation model

OPAy694 Family TINA-TI Spice Model (Rev. A)

SBOM445A.ZIP (5 KB) - TINA-TI Spice model
Supported products & hardware
Calculation tool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Supported products & hardware
Package Pins CAD symbols, footprints & 3D models
SOIC (D) 8 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos