Home Amplifiers Instrumentation amplifiers
Home
Amplifiers
Instrumentation amplifiers

INA848

ACTIVE

Ultra-low-noise, high-bandwidth instrumentation amplifier with fixed gain of 2000

Order now
Data sheet

INA848

ACTIVE
Data sheet Order now

Product details

Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 8 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.5 Features Current Feedback, High speed, Super-beta, Ultra-low noise CMRR (min) (dB) 132 Input offset drift (±) (max) (µV/°C) 0.45 Input bias current (±) (max) (nA) 50 Iq (typ) (mA) 6.2 Bandwidth at min gain (typ) (MHz) 2.8 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2.5 Input common mode headroom (to positive supply) (typ) (V) -2.5 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.055
Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 8 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.5 Features Current Feedback, High speed, Super-beta, Ultra-low noise CMRR (min) (dB) 132 Input offset drift (±) (max) (µV/°C) 0.45 Input bias current (±) (max) (nA) 50 Iq (typ) (mA) 6.2 Bandwidth at min gain (typ) (MHz) 2.8 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2.5 Input common mode headroom (to positive supply) (typ) (V) -2.5 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.055
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Fixed gain of 2000 V/V
  • Access to internal nodes for filtering
  • Ultra-low noise: 1.5 nV/√Hz input voltage noise (maximum)
  • Precision super-beta input performance:
    • Low offset voltage: 35 µV (maximum)
    • Low offset voltage drift: 0.45 µV/°C (maximum)
    • Low input bias current: 25 nA (typical)
    • Low gain drift: 5 ppm/°C (maximum)
  • Bandwidth: 2.8 MHz
  • Slew rate: 45 V/µs
  • Common-mode rejection: 132 dB (minimum)
  • Supply range:
    • Single supply: 8 V to 36 V
    • Dual supply: ±4 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Package: 8-pin SOIC
  • Fixed gain of 2000 V/V
  • Access to internal nodes for filtering
  • Ultra-low noise: 1.5 nV/√Hz input voltage noise (maximum)
  • Precision super-beta input performance:
    • Low offset voltage: 35 µV (maximum)
    • Low offset voltage drift: 0.45 µV/°C (maximum)
    • Low input bias current: 25 nA (typical)
    • Low gain drift: 5 ppm/°C (maximum)
  • Bandwidth: 2.8 MHz
  • Slew rate: 45 V/µs
  • Common-mode rejection: 132 dB (minimum)
  • Supply range:
    • Single supply: 8 V to 36 V
    • Dual supply: ±4 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Package: 8-pin SOIC

The INA848 is a fixed-gain instrumentation amplifier optimized for high-precision measurements, such as very-small, fast, differential input signals. TI’s super-beta topology provides a very low input bias current and current noise. The well-matched transistors help achieve a very low offset and offset drift. Matching of the internal resistors yields a high common-mode rejection ratio of 132 dB across the full input-voltage range, and a very low gain drift error of 5 ppm/⁰C (max).

The current-feedback topology of the INA848 produces a wide bandwidth of 2.8 MHz at a fixed gain of 2000, thereby eliminating the need for subsequent gain stages. The very-low noise floor of 1.3 nV/√Hz minimizes the impact on the equivalent number of bits (ENOB) when interfacing with high-resolution analog-to-digital converters (ADCs). The INA848 provides the flexibility of adding filters between the gain stages (pins 2 and 3) to maintain an adequate signal integrity.

These unique features of the INA848 make this device an excellent choice for applications requiring high-precision measurements, such as high-end medical instrumentation, electroencephalography, vibration sensing, and displacement measurements.

This device is designed for 8-V to 36-V single supplies, or ±4-V to ±18-V on dual supplies.

The INA848 is a fixed-gain instrumentation amplifier optimized for high-precision measurements, such as very-small, fast, differential input signals. TI’s super-beta topology provides a very low input bias current and current noise. The well-matched transistors help achieve a very low offset and offset drift. Matching of the internal resistors yields a high common-mode rejection ratio of 132 dB across the full input-voltage range, and a very low gain drift error of 5 ppm/⁰C (max).

The current-feedback topology of the INA848 produces a wide bandwidth of 2.8 MHz at a fixed gain of 2000, thereby eliminating the need for subsequent gain stages. The very-low noise floor of 1.3 nV/√Hz minimizes the impact on the equivalent number of bits (ENOB) when interfacing with high-resolution analog-to-digital converters (ADCs). The INA848 provides the flexibility of adding filters between the gain stages (pins 2 and 3) to maintain an adequate signal integrity.

These unique features of the INA848 make this device an excellent choice for applications requiring high-precision measurements, such as high-end medical instrumentation, electroencephalography, vibration sensing, and displacement measurements.

This device is designed for 8-V to 36-V single supplies, or ±4-V to ±18-V on dual supplies.
filter Find other Instrumentation amplifiers
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
INA849 ACTIVE Ultra-low noise (1 nV/√Hz), high-speed (28 MHz, 35 V/μs) precision (35 μV) instrumentation amplifier Resistor set gain version
INA851 ACTIVE Low-noise (3.2 nV/√Hz) high-speed (22 MHz) fully-differential instrumentation amp with OVP (±40 V) Fully differential output, overvoltage protection (±60 V) and attenuation gain.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Top documentation Type Title Format options Date
* Data sheet INA848 Ultra-Low-Noise (1.5 nV/√Hz), High-Bandwidth Instrumentation Amplifier With Fixed Gain of 2000 datasheet PDF | HTML 24 Sep 2020
Application note Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps PDF | HTML 27 Jul 2021
Technical article What is an instrumentation amplifier? PDF | HTML 09 Aug 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

INA848 PSpice Model (Rev. B)

SBOMBI4B.ZIP (24 KB) - PSpice Model
Download
Simulation model

INA848 TINA-TI Reference Design

SBOMBI5.TSC (40 KB) - TINA-TI Reference Design
Download
Simulation model

INA848 TINA-TI Spice Model

SBOMBI3.ZIP (23 KB) - TINA-TI Spice Model
Download
Calculation tool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Supported products & hardware

Supported products & hardware
Launch Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View Options
Package Pins CAD symbols, footprints & 3D models
SOIC (D) 8 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos