Get started and develop with Bluetooth® low energy (BLE 5.x) solutions
Start development with our example code, visualization tools, software, hardware and documentation.
Select a platform
Evaluation board
LAUNCHXL-CC1352P1 — CC1352P LaunchPad™ development kit for SimpleLink™ multi-band wireless MCU
Completing +20 dBm evaluation for Bluetooth low energy.
In stock
Limit:
Out of stock on TI.com
Not available on TI.com
LAUNCHXL-CC1352P1 — CC1352P LaunchPad™ development kit for SimpleLink™ multi-band wireless MCU
Version: null
Release date:
Evaluation board
LAUNCHXL-CC26X2R1 — CC26x2R LaunchPad™ development kit for multi-standard SimpleLink™ wireless MCU
Completing +5 dBM evaluation for Bluetooth low energy.
In stock
Limit:
Out of stock on TI.com
Not available on TI.com
LAUNCHXL-CC26X2R1 — CC26x2R LaunchPad™ development kit for multi-standard SimpleLink™ wireless MCU
Version: null
Release date:
Development kit
LP-CC2652RB — CC2652RB LaunchPad™ development kit for BAW multi-protocol 2.4-GHz SimpleLink™ wireless MCU
Completing +5 dBM evaluation for Bluetooth low energy with no external crystals required.
In stock
Limit:
Out of stock on TI.com
Not available on TI.com
LP-CC2652RB — CC2652RB LaunchPad™ development kit for BAW multi-protocol 2.4-GHz SimpleLink™ wireless MCU
Version: null
Release date:
Evaluation board
LPSTK-CC1352R — SimpleLink™ multi band CC1352R wireless MCU Launchpad™ SensorTag kit
In stock
Limit:
Out of stock on TI.com
Not available on TI.com
LPSTK-CC1352R — SimpleLink™ multi band CC1352R wireless MCU Launchpad™ SensorTag kit
Version: null
Release date:
IDE, configuration, compiler or debugger
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Supported products & hardware
This design resource supports most products in these categories.
Check the product details page to verify support.
-
parametric-filter Arm-based microcontrollers -
parametric-filter Arm-based processors -
parametric-filter C2000 real-time microcontrollers -
parametric-filter Digital signal processors (DSPs) -
parametric-filter mmWave radar sensors -
parametric-filter MSP430 microcontrollers -
parametric-filter Signal conditioners -
parametric-filter Sub-1 GHz products -
parametric-filter Wi-Fi products
Hardware development
Development kit
Evaluation board
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Version: 20.2.0
Release date: Jun 2, 2025
This design resource supports most products in these categories.
Check the product details page to verify support.
-
parametric-filter Arm-based microcontrollers -
parametric-filter Arm-based processors -
parametric-filter C2000 real-time microcontrollers -
parametric-filter Digital signal processors (DSPs) -
parametric-filter mmWave radar sensors -
parametric-filter MSP430 microcontrollers -
parametric-filter Signal conditioners -
parametric-filter Sub-1 GHz products -
parametric-filter Wi-Fi products
Hardware development
Development kit
Evaluation board
Documentation
Release Information
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.
CCS v20 is TI’s next generation Integrated Development Environment (IDE) based on Theia IDE framework. CCS v20.2.0 uses a modified version of the Theia-IDE framework and offers a user experience similar to Visual Studio Code™.
- Installation instructions and User's Guide
- Windows 32bit is not supported with CCSv20.
- XDS510 class debug probes are not supported with CCSv20.
What's new
- Theia IDE core update (v1.58); AI features available via Theia AI, or third party extensions; added new 'AI/Code Assistants' link in Getting Started page
- Associated AppNote: https://software-dl.ti.com/ccs/esd/documents/application_notes/appnote-ccs_ai_code_assistant.html
- Various IDE/Project/Debug improvements
- Support installing CCS into Program Files folder on Windows
- SysConfig v1.24
- Segger J-Link support v8.34.0
- Compiler updates (TI Arm Clang v4.0.3.LTS, C2000 v22.6.2.LTS, C7000 v5.0.0.LTS)
- Device Support updates (AM62D, AM261x, AM263Px, CC27xx, F28E12, F29H85x, MSPM0G5x etc.)
- Please see the Release Notes for full list of changes: https://software-dl.ti.com/ccs/esd/CCSv20/CCS_20_2_0/exports/CCS_20.2.0_ReleaseNote.htm
Software development kit (SDK)
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
Version: 8.30.01.01
Release date: Jan 27, 2025
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
Documentation
Release Information
The SimpleLink™ Low Power F2 Software Development Kit (SDK), formerly known as the CC13xx and CC26xx SDK, delivers components that enable engineers to develop applications on the Texas Instruments SimpleLink CC13xx and CC26xx family of wireless microcontrollers (MCUs). This software toolkit provides a cohesive and consistent software experience for all SimpleLink CC13xx and CC26xx wireless MCU users by packaging essential software components, such as a Bluetooth® Low Energy (BLE) protocol stack supporting Bluetooth 5.2, Zigbee 3.0 compliant protocol suite, RF-Proprietary examples, TI’s 15.4 Stack, TI Wi-SUN FAN Stack, Amazon Sidewalk examples, as well as the TI-RTOS7 and FreeRTOS™ kernels and TI Drivers in one easy-to-use software package along with example applications and documentation. In addition, the Dynamic Multi-Protocol Manager (DMM) software component enables multiprotocol development on a single SimpleLink wireless MCU.
Although not included in the SDK, SimpleLink CC13xx and CC26xx wireless MCUs are also capable of supporting the following wireless solutions: Please refer to their respective repositories for resources and more information.
- The Matter standard: https://github.com/TexasInstruments/matter
- Thread 1.1.1 networking stack based on OpenThread: https://github.com/TexasInstruments/ot-ti
The SimpleLink MCU portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. With 100 percent code reuse across host MCUs, Wi-Fi™, Bluetooth Low Energy, Sub-1GHz devices and more, choose the MCU or connectivity standard that fits your design. A one-time investment with the SimpleLink software development kit allows you to reuse often, opening the door to create unlimited applications. For more information, visit www.ti.com/simplelink.
This is version 8.30.01.01 of the SimpleLink Low Power F2 SDK. This version only contains internal metadata updates for integrating with the TI Developer Zone; there are no embedded software changes from the 8.30.00.121 release. This SDK is also available on GitHub at https://github.com/TexasInstruments/simplelink-lowpower-f2-sdk
What's new
- Example projects and RF settings for the upcoming CC2674P10 LaunchPad™ development kit for SimpleLink multi-standard wireless MCU.
- CCS Theia, now supports all SimpleLink F2 devices. Please use version 1.5.0 or newer. For more information, see Upcoming Features.
- The new TI Log driver simplifies adding log statements to your application without compromising on memory or processing power. The following SW modules are instrumented: Power driver, UART2 driver, TI 15.4-Stack.
- The Wi-SUN gateway example for Linux, wfantund, now supports using external authentication server and/or external DHCP server. It also supports Router Node configuration for the first time.
- The TI Wi-SUN Stack has three new Network Profiles which simplify network configuration.
- MCUboot is updated to version 2.0 and now supports using an encrypted image. You can now configure MCUboot in SysConfig.
- DMM now supports closing a handle, opening the possibility of using more than two handles in one application.
Calculation tool
SMARTRF-STUDIO-7 — SmartRF Studio 7 application software
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
MSP430 microcontrollers
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Daughter card
Development kit
Evaluation board
Interface adapter
SMARTRF-STUDIO-7 — SmartRF Studio 7 application software
Version: 2.32.0
Release date: Dec 20, 2024
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
MSP430 microcontrollers
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Daughter card
Development kit
Evaluation board
Interface adapter
Documentation
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
Release Information
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
What's new
- Updated RF PHY settings for the CC13x4/CC26x4 devices
- Updated target board definitions for LP_EM_CC2674P10
- Various improvements and bug-fixes
IDE, configuration, compiler or debugger
SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio
Required if you are using the sensor controller.
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio
Version: 2.9.0
Release date: Apr 8, 2022
Installer executable
Checksum
Compressed archive
Checksum
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
Documentation
Compressed source file archive
Release Information
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, allowing for ultra-low power application design.
The tool generates a Sensor Controller Interface driver, which is a set of C source files to be compiled into the System CPU (ARM Cortex-M3/M4) application. These source files contain the Sensor Controller firmware image and associated definitions, and generic functions that allow the System CPU application to control the Sensor Controller and exchange data.
The Sensor Controller is a small CPU core that is highly optimized for low power consumption and efficient peripheral operation. The Sensor Controller is located in the CC26xx/CC13xx auxiliary (AUX) power/clock domain, and can perform simple background tasks autonomously and independently of the System CPU and the MCU domain power state. Such tasks include but are not limited to:
- Analog sensor polling, using ADC or comparator
- Digital sensor polling, using SPI, I2C or other protocols
- Capacitive sensing, using current source, comparator and time-to-digital converter (TDC)
- Waveform generation, for example for LCDs
The Sensor Controller is user programmable, using a simple programming language with syntax similar to C. This allows for sensor polling and other tasks to be specified as sequential algorithms, rather than static configuration of complex peripheral modules, timers, DMA, register programmable state machines, event routing and so on. The main advantages are:
- Flexibility
- Dynamic reuse of hardware resources
- Ability to perform simple data processing without need for dedicated hardware
- Observability and debugging options
What's new
- Added support for new devices: CC2672R3, CC2672P3, CC2662R-Q1, CC2652PSIP and CC2652P7.
- Added example support for new SDKs, using TI-RTOS 7 and GPIO driver for the latest CC13x2/CC26x2 SDK.
- Minor improvements.
- Bug-fixes.
Software programming tool
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
Supported products & hardware
Products
Arm Cortex-M0+ MCUs
Arm Cortex-R MCUs
Arm-based processors
Automotive mmWave radar sensors
C2000 real-time microcontrollers
Digital signal processors (DSPs)
Industrial mmWave radar sensors
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
Version: 9.2.0
Release date: Jun 20, 2025
Products
Arm Cortex-M0+ MCUs
Arm Cortex-R MCUs
Arm-based processors
Automotive mmWave radar sensors
C2000 real-time microcontrollers
Digital signal processors (DSPs)
Industrial mmWave radar sensors
Release Information
UniFlash is a standalone tool used to program on-chip and external flash memory on TI MCUs and on-board flash memory for Sitara processors. UniFlash has a GUI, command line, and scripting interface. UniFlash is available free of charge.
What's new
- Device support sync-up with CCS v20.2.0 (AM26D, AM261x, AM263Px, CC27xx, F28E12, F29H85x, MSPM0G5x etc.)
- Updated J-Link support package (v8.34.0)
- Updated AM26x serial flash programming to include ability to perform verification
- Fixed flash programming issues on CC13xx devices
- Fixed issue with running certain CC23xx devices after program load
- Fixed CRC calculation issue in the UniFlash GUI
- various bug fixes
Software programming tool
FLASH-PROGRAMMER — SmartRF flash programmer
FLASH-PROGRAMMER — SmartRF flash programmer
Version: null
Release date: Aug 23, 2024
Support software
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
Version: 01.00.00.0Z
Release date: Jun 29, 2014
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
Release Information
The design resource accessed as www.ti.com/lit/zip/swrc045 or www.ti.com/lit/xx/swrc045z/swrc045z.zip has been migrated to a new user experience at www.ti.com/tool/download/SWRC045. Please update any bookmarks accordingly.
Calculation tool
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx and CC23xx devices
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx and CC23xx devices
Version: 02.00.00.0A
Release date: Apr 22, 2024
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Release Information
This release adds the Power Estimator for CC23xx devices
What's new
- CC23xx Power Estimator
Software development kit (SDK)
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
Version: 8.30.01.01
Release date: Jan 27, 2025
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
Documentation
Release Information
The SimpleLink™ Low Power F2 Software Development Kit (SDK), formerly known as the CC13xx and CC26xx SDK, delivers components that enable engineers to develop applications on the Texas Instruments SimpleLink CC13xx and CC26xx family of wireless microcontrollers (MCUs). This software toolkit provides a cohesive and consistent software experience for all SimpleLink CC13xx and CC26xx wireless MCU users by packaging essential software components, such as a Bluetooth® Low Energy (BLE) protocol stack supporting Bluetooth 5.2, Zigbee 3.0 compliant protocol suite, RF-Proprietary examples, TI’s 15.4 Stack, TI Wi-SUN FAN Stack, Amazon Sidewalk examples, as well as the TI-RTOS7 and FreeRTOS™ kernels and TI Drivers in one easy-to-use software package along with example applications and documentation. In addition, the Dynamic Multi-Protocol Manager (DMM) software component enables multiprotocol development on a single SimpleLink wireless MCU.
Although not included in the SDK, SimpleLink CC13xx and CC26xx wireless MCUs are also capable of supporting the following wireless solutions: Please refer to their respective repositories for resources and more information.
- The Matter standard: https://github.com/TexasInstruments/matter
- Thread 1.1.1 networking stack based on OpenThread: https://github.com/TexasInstruments/ot-ti
The SimpleLink MCU portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. With 100 percent code reuse across host MCUs, Wi-Fi™, Bluetooth Low Energy, Sub-1GHz devices and more, choose the MCU or connectivity standard that fits your design. A one-time investment with the SimpleLink software development kit allows you to reuse often, opening the door to create unlimited applications. For more information, visit www.ti.com/simplelink.
This is version 8.30.01.01 of the SimpleLink Low Power F2 SDK. This version only contains internal metadata updates for integrating with the TI Developer Zone; there are no embedded software changes from the 8.30.00.121 release. This SDK is also available on GitHub at https://github.com/TexasInstruments/simplelink-lowpower-f2-sdk
What's new
- Example projects and RF settings for the upcoming CC2674P10 LaunchPad™ development kit for SimpleLink multi-standard wireless MCU.
- CCS Theia, now supports all SimpleLink F2 devices. Please use version 1.5.0 or newer. For more information, see Upcoming Features.
- The new TI Log driver simplifies adding log statements to your application without compromising on memory or processing power. The following SW modules are instrumented: Power driver, UART2 driver, TI 15.4-Stack.
- The Wi-SUN gateway example for Linux, wfantund, now supports using external authentication server and/or external DHCP server. It also supports Router Node configuration for the first time.
- The TI Wi-SUN Stack has three new Network Profiles which simplify network configuration.
- MCUboot is updated to version 2.0 and now supports using an encrypted image. You can now configure MCUboot in SysConfig.
- DMM now supports closing a handle, opening the possibility of using more than two handles in one application.
Calculation tool
SMARTRF-STUDIO-7 — SmartRF Studio 7 application software
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
MSP430 microcontrollers
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Daughter card
Development kit
Evaluation board
Interface adapter
SMARTRF-STUDIO-7 — SmartRF Studio 7 application software
Version: 2.32.0
Release date: Dec 20, 2024
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
MSP430 microcontrollers
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Daughter card
Development kit
Evaluation board
Interface adapter
Documentation
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
Release Information
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
What's new
- Updated RF PHY settings for the CC13x4/CC26x4 devices
- Updated target board definitions for LP_EM_CC2674P10
- Various improvements and bug-fixes
IDE, configuration, compiler or debugger
SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio
Required if you are using the sensor controller.
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio
Version: 2.9.0
Release date: Apr 8, 2022
Installer executable
Checksum
Compressed archive
Checksum
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
Documentation
Compressed source file archive
Release Information
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, allowing for ultra-low power application design.
The tool generates a Sensor Controller Interface driver, which is a set of C source files to be compiled into the System CPU (ARM Cortex-M3/M4) application. These source files contain the Sensor Controller firmware image and associated definitions, and generic functions that allow the System CPU application to control the Sensor Controller and exchange data.
The Sensor Controller is a small CPU core that is highly optimized for low power consumption and efficient peripheral operation. The Sensor Controller is located in the CC26xx/CC13xx auxiliary (AUX) power/clock domain, and can perform simple background tasks autonomously and independently of the System CPU and the MCU domain power state. Such tasks include but are not limited to:
- Analog sensor polling, using ADC or comparator
- Digital sensor polling, using SPI, I2C or other protocols
- Capacitive sensing, using current source, comparator and time-to-digital converter (TDC)
- Waveform generation, for example for LCDs
The Sensor Controller is user programmable, using a simple programming language with syntax similar to C. This allows for sensor polling and other tasks to be specified as sequential algorithms, rather than static configuration of complex peripheral modules, timers, DMA, register programmable state machines, event routing and so on. The main advantages are:
- Flexibility
- Dynamic reuse of hardware resources
- Ability to perform simple data processing without need for dedicated hardware
- Observability and debugging options
What's new
- Added support for new devices: CC2672R3, CC2672P3, CC2662R-Q1, CC2652PSIP and CC2652P7.
- Added example support for new SDKs, using TI-RTOS 7 and GPIO driver for the latest CC13x2/CC26x2 SDK.
- Minor improvements.
- Bug-fixes.
Software programming tool
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
Supported products & hardware
Products
Arm Cortex-M0+ MCUs
Arm Cortex-R MCUs
Arm-based processors
Automotive mmWave radar sensors
C2000 real-time microcontrollers
Digital signal processors (DSPs)
Industrial mmWave radar sensors
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
Version: 9.2.0
Release date: Jun 20, 2025
Products
Arm Cortex-M0+ MCUs
Arm Cortex-R MCUs
Arm-based processors
Automotive mmWave radar sensors
C2000 real-time microcontrollers
Digital signal processors (DSPs)
Industrial mmWave radar sensors
Release Information
UniFlash is a standalone tool used to program on-chip and external flash memory on TI MCUs and on-board flash memory for Sitara processors. UniFlash has a GUI, command line, and scripting interface. UniFlash is available free of charge.
What's new
- Device support sync-up with CCS v20.2.0 (AM26D, AM261x, AM263Px, CC27xx, F28E12, F29H85x, MSPM0G5x etc.)
- Updated J-Link support package (v8.34.0)
- Updated AM26x serial flash programming to include ability to perform verification
- Fixed flash programming issues on CC13xx devices
- Fixed issue with running certain CC23xx devices after program load
- Fixed CRC calculation issue in the UniFlash GUI
- various bug fixes
Software programming tool
FLASH-PROGRAMMER — SmartRF flash programmer
FLASH-PROGRAMMER — SmartRF flash programmer
Version: null
Release date: Aug 23, 2024
Support software
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
Version: 01.00.00.0Z
Release date: Jun 29, 2014
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Other wireless products
Sub-1 GHz transceivers
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Evaluation board
Release Information
The design resource accessed as www.ti.com/lit/zip/swrc045 or www.ti.com/lit/xx/swrc045z/swrc045z.zip has been migrated to a new user experience at www.ti.com/tool/download/SWRC045. Please update any bookmarks accordingly.
Calculation tool
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx and CC23xx devices
Supported products & hardware
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx and CC23xx devices
Version: 02.00.00.0A
Release date: Apr 22, 2024
Products
Automotive wireless connectivity products
Low-power 2.4-GHz products
Sub-1 GHz wireless MCUs
Hardware development
Development kit
Release Information
This release adds the Power Estimator for CC23xx devices
What's new
- CC23xx Power Estimator
Documentation & related resources
Additional documentation
SimpleLink CC13x2, and CC26x2 SDK Documentation Overview
Application note
Hardware Migration From CC26x0 to CC26x2R (Rev. D)
Getting Started With CC2652RB for Crystal-less BAW Operation
PDF
|
HTML
Optimizing the SimpleLink CC1352P for Coin Cell Operation at 10 dBm Output Power (Rev. C)
PDF
|
HTML
TI Cloud training
SimpleLink Academy for SimpleLink CC13x2 / CC26x2 SDK