LP-MSPM0H3216 is a prototype evaluation module and is available in limited quantities
LP-MSPM0H3216
MSPM0H3216 LaunchPad™ development kit for 32MHz Arm® Cortex®-M0+ microcontroller
LP-MSPM0H3216
Overview
The MSPM0H3216LaunchPad™ development kit is an easy-to-use evaluation module for the MSPM0H3216 microcontroller (MCU). The LaunchPad kit contains everything needed to start developing on the MSPM0H321x microcontroller platform, including an onboard debug probe for programming and debugging. The board also features on board buttons, LEDs, and an RGB LED for quick integration of a simple user interface.
The MSPM0H3216 is an Arm® Cortex® 32-bit M0+ CPU with a frequency up to 32MHz. The device features 64KB of embedded flash memory combined with 8KB of on-chip RAM. The device also has internal analog such as internal ADC, voltage reference, and comparator with 8-bit DAC. The MSPM0H3216 is also the first 5V MSPM0 device, which can be widely used in appliance, industrial, automotive or other 5V applications.
Features
- Onboard XDS110 debug probe
- Backchannel UART through USB to PC
- USB powered
- 40-pin BoosterPack headers
- RC filter for ADC input
- Hardware user interfaces
- Two buttons; 1 RGB LED, 1 Red LED
- External clock crystals
Arm Cortex-M0+ MCUs
Order & start development
Evaluation board
LP-MSPM0H3216 — MSPM0H3216 LaunchPad development kit for 32-MHz Arm Cortex-M0+ MCU
LP-MSPM0H3216 — MSPM0H3216 LaunchPad development kit for 32-MHz Arm Cortex-M0+ MCU
Application software & framework
MSPM0-COOLING-FAN-CONTROLLER-DEMO-APPSW — MSPM0 Cooling Fan Controller Demo
Supported products & hardware
Products
Arm Cortex-M0+ MCUs
Hardware development
Evaluation board
MSPM0-COOLING-FAN-CONTROLLER-DEMO-APPSW — MSPM0 Cooling Fan Controller Demo
Products
Arm Cortex-M0+ MCUs
Hardware development
Evaluation board
Release Information
It is the software for the application note Cooling FAN Controller with MSPM0. There are three different demo code: FAN_Control_host_LP_MSPM0L1306, FAN_Controller_MSPM0C1104 and FAN_Controller_MSPM0H3216.
What's new
- FAN_Control_host_LP_MSPM0L1306
- FAN_Controller_MSPM0C1104
- FAN_Controller_MSPM0H3216
IDE, configuration, compiler or debugger
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Supported products & hardware
This design resource supports most products in these categories.
Check the product details page to verify support.
- Arm-based microcontrollers
- Arm-based processors
- C2000 real-time microcontrollers
- Digital signal processors (DSPs)
- mmWave radar sensors
- MSP430 microcontrollers
- Signal conditioners
- Sub-1 GHz products
- Wi-Fi products
Hardware development
Development kit
Evaluation board
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
This design resource supports most products in these categories.
Check the product details page to verify support.
- Arm-based microcontrollers
- Arm-based processors
- C2000 real-time microcontrollers
- Digital signal processors (DSPs)
- mmWave radar sensors
- MSP430 microcontrollers
- Signal conditioners
- Sub-1 GHz products
- Wi-Fi products
Hardware development
Development kit
Evaluation board
Documentation
Release Information
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.
CCS v20 is TI’s next generation Integrated Development Environment (IDE) based on Theia IDE framework. CCS v20.2.0 uses a modified version of the Theia-IDE framework and offers a user experience similar to Visual Studio Code™.
- Installation instructions and User's Guide
- Windows 32bit is not supported with CCSv20.
- XDS510 class debug probes are not supported with CCSv20.
What's new
- Theia IDE core update (v1.58); AI features available via Theia AI, or third party extensions; added new 'AI/Code Assistants' link in Getting Started page
- Associated AppNote: https://software-dl.ti.com/ccs/esd/documents/application_notes/appnote-ccs_ai_code_assistant.html
- Various IDE/Project/Debug improvements
- Support installing CCS into Program Files folder on Windows
- SysConfig v1.24
- Segger J-Link support v8.34.0
- Compiler updates (TI Arm Clang v4.0.3.LTS, C2000 v22.6.2.LTS, C7000 v5.0.0.LTS)
- Device Support updates (AM62D, AM261x, AM263Px, CC27xx, F28E12, F29H85x, MSPM0G5x etc.)
- Please see the Release Notes for full list of changes: https://software-dl.ti.com/ccs/esd/CCSv20/CCS_20_2_0/exports/CCS_20.2.0_ReleaseNote.htm
IDE, configuration, compiler or debugger
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
Supported products & hardware
Products
Arm Cortex-M0+ MCUs
Hardware development
Evaluation board
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio 1.01.00.08 for Windows
Products
Arm Cortex-M0+ MCUs
Hardware development
Evaluation board
Documentation
MSP Zero Code Studio 1.01.00.08 Manifest
MSP Zero Code Studio 1.01.00.08 Release Notes
Release Information
MSP Zero Code Studio is a visual design environment that enables users to configure, develop and run microcontroller applications in minutes! Zero coding and no IDE required.
What's new
- Added new Analog features. Configure the DAC8 from the comparator, and configure the OPA in Buffer Mode.
- Added Lookup Table support. Define and access values from a lookup table array.
- Added new examples. Use the DAC8 Function Generator example to define and output a waveform using the comparator and OPA. Use the Lookup Table example to define and access values using a lookup table and output them via UART.
- Addressed minor bug fixes.
- For more details, please refer to the MSP Zero Code Studio Release Notes
Software programming tool
MSP-GANG-SOFTWARE — MSP-GANG Software
Supported products & hardware
Products
Arm Cortex-M0+ MCUs
MSP430 microcontrollers
Hardware development
Development kit
Evaluation board
MSP-GANG-SOFTWARE — MSP-GANG Software
MSP-GANG Installer 1.03.09.00
Products
Arm Cortex-M0+ MCUs
MSP430 microcontrollers
Hardware development
Development kit
Evaluation board
Documentation
MSP-GANG Manifest
Release Information
The MSP Gang Programmer is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the user to fully customize the process.
The MSP Gang Programmer is provided with an expansion board, called the Gang Splitter, that implements the interconnections between the MSP Gang Programmer and multiple target devices. Eight cables are provided that connect the expansion board to eight target devices (via JTAG or Spy-Bi-Wire connectors). The programming can be done with a PC or as a standalone device. A PC-side Graphical User Interface is also available and is DLL-based.
Features:
- Quickly and reliably program Flash or FRAM-based MSP devices via an RS-232 or USB interface
- Several programming modes:
- Interactive Mode Programming while connected to PC using the MSP GANG Programmer GUI
- Program from Image: An image can be stored, which contains configuration options and code files. This allows users to program MSP devices standalone, without a PC
- Programming from Script: Enables developers to automate more complicated programming procedures.
- Intuitive GUI for configuring, programming and testing production setup
- SD Card slot for storing images
- LCD screen for easy programming without a PC
- Supports up to 8 targets simultaneously
- Supports MSPM0/MSP430/MSP432 devices
What's new
- Added low-power mode debug support for MSPM0
Technical documentation
=
Top documentation selected by TI
No results found. Please clear your search and try again.
View all 2
| Type | Title | Date | ||
|---|---|---|---|---|
| * | EVM User's guide | LP-MSPM0H3216 Evaluation Module User's Guide | PDF | HTML | Sep 5, 2024 |
| Certificate | LP-MSPM0H3216 EU Declaration of Conformity (DoC) | Apr 14, 2025 |
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.