首頁 電源管理 LED 驅動器 汽車 LED 驅動器
首頁
電源管理
LED 驅動器
汽車 LED 驅動器
最新

TPS92761-Q1

現行
立即訂購
產品規格表

TPS92761-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 24 Topology Current Sink, Synchronous Buck Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 5 Vin (max) (V) 36 Vout (min) (V) 0 Vout (max) (V) 20 Iout (max) (A) 2 Features EEPROM, Fault Diagnostic, Integrated buck converter, PWM Dimming, Spread Spectrum, UART
Number of channels 24 Topology Current Sink, Synchronous Buck Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 5 Vin (max) (V) 36 Vout (min) (V) 0 Vout (max) (V) 20 Iout (max) (A) 2 Features EEPROM, Fault Diagnostic, Integrated buck converter, PWM Dimming, Spread Spectrum, UART
HTQFP (PHP) 48 81 mm² (9 mm × 9 mm)
  • AEC-Q100 qualified for automotive applications
    • Grade 1: -40°C to 125°C ambient operating temperature
  • Functional safety targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 system design up to ASIL B
  • 24 constant current sinks with high precision:
    • 20V maximum voltage capability
    • Up to 90mA channel current set by resistor
    • Low dropout voltage: 400mV (typ) at 90mA
  • Flexible dimming control:
    • 6-bit independent current setting
    • 14-bit independent PWM dimming with phase-shift control
    • Programmable slew-rate control
  • Integrated synchronous buck regulator
    • Wide input voltage range: 5V to 36V
    • Supports 400kHz and 2.1MHz switching frequency
    • Spread spectrum frequency modulation
    • Dynamic headroom voltage control (DHC)
  • UART serial communication
    • Support for up to 2MHz clock frequency
    • Internal oscillator for system clock
    • CAN transceiver compatible
  • Internal EEPROM
    • Failsafe default settings
    • Customer calibration data
  • Extensive fault diagnostics
  • AEC-Q100 qualified for automotive applications
    • Grade 1: -40°C to 125°C ambient operating temperature
  • Functional safety targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 system design up to ASIL B
  • 24 constant current sinks with high precision:
    • 20V maximum voltage capability
    • Up to 90mA channel current set by resistor
    • Low dropout voltage: 400mV (typ) at 90mA
  • Flexible dimming control:
    • 6-bit independent current setting
    • 14-bit independent PWM dimming with phase-shift control
    • Programmable slew-rate control
  • Integrated synchronous buck regulator
    • Wide input voltage range: 5V to 36V
    • Supports 400kHz and 2.1MHz switching frequency
    • Spread spectrum frequency modulation
    • Dynamic headroom voltage control (DHC)
  • UART serial communication
    • Support for up to 2MHz clock frequency
    • Internal oscillator for system clock
    • CAN transceiver compatible
  • Internal EEPROM
    • Failsafe default settings
    • Customer calibration data
  • Extensive fault diagnostics

The TPS92761-Q1 is a 24 channel device with an integrated synchronous Buck regulator and protected linear current sinks. The device is capable of driving current up to 90mA through LEDs with channel-to-channel accuracy of less than ±3.5%. Each linear current sink can be individually programmed by a 6-bit current setting value and is independently controlled by pulse width modulation (PWM) using 14-bit registers. Transient behavior is improved by programming uniform phase shifted PWM signals between operating channels.

The LEDs can be powered by the voltage rail generated using the wide 5V to 36V input voltage range integrated synchronous Buck regulator. The buck regulator implements an adaptive off-time current mode control enabling low input voltage operation. The device is capable of providing 2.68A current at 2.1MHz switching frequency and 4A current at 400kHz switching frequency with fast transient response. Dynamic headroom control is implemented to optimize system efficiency and reduce thermal dissipation.

The TPS92761-Q1 features an internal oscillator that supports multidrop, universal asynchronous receiver transmitter (UART) serial interface. The internal EEPROM can store system defaults as well as calibration and lighting module data. An on-board ADC with multiplexed inputs samples all LED channels as well as IC die temperature and supply voltages.

The TPS92761-Q1 is a 24 channel device with an integrated synchronous Buck regulator and protected linear current sinks. The device is capable of driving current up to 90mA through LEDs with channel-to-channel accuracy of less than ±3.5%. Each linear current sink can be individually programmed by a 6-bit current setting value and is independently controlled by pulse width modulation (PWM) using 14-bit registers. Transient behavior is improved by programming uniform phase shifted PWM signals between operating channels.

The LEDs can be powered by the voltage rail generated using the wide 5V to 36V input voltage range integrated synchronous Buck regulator. The buck regulator implements an adaptive off-time current mode control enabling low input voltage operation. The device is capable of providing 2.68A current at 2.1MHz switching frequency and 4A current at 400kHz switching frequency with fast transient response. Dynamic headroom control is implemented to optimize system efficiency and reduce thermal dissipation.

The TPS92761-Q1 features an internal oscillator that supports multidrop, universal asynchronous receiver transmitter (UART) serial interface. The internal EEPROM can store system defaults as well as calibration and lighting module data. An on-board ADC with multiplexed inputs samples all LED channels as well as IC die temperature and supply voltages.

filter 尋找其它 汽車 LED 驅動器
下載 觀看有字幕稿的影片 影片

索取更多資訊

提供完整產品規格表和其它資訊。立即索取

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS92761-Q1 Automotive Constant Voltage Buck with 24-Channel Linear LED Driver datasheet PDF | HTML 2026/6/9

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS92761EVM — TPS92761 評估模組

TPS92761-Q1 是具備整合式同步降壓穩壓器及受保護線性電流汲極的 24 通道裝置。此裝置能透過 LED 驅動最高 90mA 的電流，通道至通道準確度低於 ±3.5%。每個線性電流汲極皆可透過 6 位元電流設定值獨立編程，並由使用 14 位元暫存器的脈衝寬度調變 (PWM) 獨立控制。透過在操作通道間編程均勻相移的 PWM 訊號，可改善暫態行為。

支援產品和硬體
驅動程式或資料庫

TPS9276X-CODE-EXAMPLE — Code examples for TPS9276x

Code examples for TPS9276x
支援產品和硬體
設計工具

TPS9276X-DESIGN — TPS9276X design resources

TPS9276X design resources
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PHP) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片