TPS2HCS05-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to 125°C
- Withstands 36V load dump
- Dual-channel SPI controlled smart high-side switch with integrated nFETs.
- Integrated wire-harness protection without MCU involvement and a SPI programmable fuse curve
- Protection against persistent overload condition
- User programmable EEPROM
- Improve system-level reliability through SPI programmable adjustable overcurrent protection
- SPI configurable capacitive charging mode to drive a wide range of capacitive input ECUs load current needs.
- Low quiescent current, low-power ON-state to supply always-ON loads with automatic wake on load current increase with wake signal to MCU
- Robust integrated output protection:
- Integrated thermal protection
- Protection against short-to-ground
- Protection against reverse battery events including automatic switch on of FET with reverse supply voltage
- Automatic shutoff on loss of battery
- Integrated output clamp to demagnetize inductive loads
- Digital sense output using SPI is configurable to measure:
- Load current accurately with integrated ADC
- Output or supply voltage, FET temperature
- Provides full fault diagnostics through SPI and indication through FLT pin
- Detection of open load and short-to-battery
The TPS2HCS05-Q1 device is a dual-channel, smart high-side switch controlled through a serial peripheral interface (SPI), and is intended for power distribution and actuator drive applications. The device integrates robust protection to establish output wire and load protection against short-circuit or overload conditions. The device features overcurrent protection configurable through SPI, with sufficient flexibility to support loads that require large inrush currents and provide improved protection. The device also integrates a programmable fuse profile (current versus time) that turns off the switch under persistent overload conditions. Together, the two features allow for the optimization of the wire harness for any load profile with full protection.
The device supports an SPI-configurable capacitive charging mode for ECU loads in power distribution switch applications. The device also includes two low-power mode (LPM) states, an auto-entry mode and a manual entry mode, that enables the device to provide current to the load ECU while only consuming from 10µA to 32µA of current.
The TPS2HCS05-Q1 device also provides a high-accuracy digital-current sense over SPI that allows for improved load diagnostics. By reporting load current and the channel output voltage and output FET temperature to a system MCU, the device enables the diagnosis of switch and load failures.
The TPS2HCS05-Q1 is available in a HTSSOP package which allows for a reduced PCB footprint.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS2HCS05-Q1 5mΩ , Automotive Dual-Channel , SPI Controlled High-Side Switch With Integrated I2T Wire Protection and Low Power Mode datasheet | PDF | HTML | 2026/11/2 | ||
| * | 資料表 | TPS2HCS05-Q1 5mΩ , Automotive Dual-Channel , SPI Controlled High-Side Switch With Integrated I2T Wire Protection and Low Power Mode datasheet | PDF | HTML | 2025/12/12 | ||
| 應用說明 | Basics of High-Side Switches and Controllers | PDF | HTML | 2026/3/31 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
HSS-HCMOTHERBRDEVM — 智慧型保險絲主機板
HSS-HCMOTHERBRDEVM 和對應的子卡（例如 HSS-2HCS10EVM）用於展示和評估德州儀器的智慧型保險絲高壓側開關產品組合的所有功能。此主機板設計用於搭配多個不同子卡使用，讓單一主機 EVM 可用於具有不同導通電阻和功能的各種不同高壓側開關。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| UNKNOWN (PWC) | 18 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。