TPS62095
- DCS-Control™ Topology
- Pin-to-Pin Compatible with TPS62090
- Supports 1.2mm Height Total Solution
- 95% Converter Efficiency
- 20μA Operating Quiescent Current
- 2.5V to 5.5V Input Voltage Range
- Power Save Mode
- Two Level Short Circuit Protection
- 100% Duty Cycle for Lowest Dropout
- Output Discharge Function
- Adjustable Soft Startup
- Output Voltage Tracking
- 0.8V to VIN Adjustable Output Voltage
- 3mm × 3mm 16-Pin VQFN Package
The TPS62095 device is a high frequency synchronous step down converter optimized for small solution size, high efficiency and suitable for battery powered applications. To maximize efficiency, the converter operates in PWM mode with a nominal switching frequency of 1.4MHz and automatically enters Power Save Mode operation at light load currents. When used in distributed power supplies and point of load regulation, the device allows voltage tracking to other voltage rails and tolerates output capacitors up to 150μF and beyond. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation.
The output voltage startup ramp is controlled by the soft startup pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the EN and PG pins. In Power Save Mode, the device operates with typically 20μA quiescent current. Power Save Mode is entered automatically and seamlessly maintaining high efficiency over the entire load current range.
技術資料
設計および開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
DAC38RF80EVM — DAC38RF80 評価モジュール
The DAC38RF80EVM is the circuit board for evaluating DAC38RF80/84/90 digital-to-analog converters (DACs). The EVM can be used to evaluate the performance of the DAC up to 9-GSPS sampling rate. It is designed to work with the FPGA-based pattern generator card TSW14J56EVM (Rev B and up). The (...)
DAC38RF82EVM — DAC38RF82 デュアルチャネル、14 ビット、9GSPS、1x ~ 24x 補間、6GHz と 9GHz PLL DAC の評価基板
DAC38RF89EVM — DAC38RF89 デュアルチャネル、14 ビット、8.4GSPS、1x ~ 24x 補間、5GHz と 7.5GHz PLL DAC の評価基板
DAC38RF89 評価基板 (EVM) は、DAC38RF89 の D/A コンバータ (DAC) を評価できます。この DAC38RFEVM により、最大 9-GSPS のサンプリング レートの DAC の性能を評価できます。また、TSW14J56EVM (Rev B 以降) との組み合わせが可能です。使用可能な FMC コネクタにより、DAC から、サード パーティー ベンダの FPGA 開発ボードへのインターフェイスが可能になります。また、DAC とオンボードの LMK04828 クロック チップを SPI 経由で制御するための使いやすいソフトウェア (...)
TMDX654IDKEVM — AM65x – 産業用開発キット (IDK)
AM65x 産業用開発キット (IDK) は、ファクトリ オートメーション、ドライブ、ロボット、グリッド インフラなどのアプリケーションに最適な Sitara™ AM65x プロセッサの産業用通信機能と制御機能を評価するための開発プラットフォームです。AM65x プロセッサは PROFINET、EtherCAT、EtherNet/IP などの産業用イーサネット プロトコルで使用できる 3 つの PRU-ICSS(プログラマブル リアルタイム ユニット産業用通信サブシステム)サブシステムを搭載しています。
TPS62095 PSpice Unencrypted Transient Model (Rev. A)
TIDA-01215 — RF サンプリング DAC のスプールとフェーズ・ノイズを最適化する電源のリファレンス・デザイン
TIDA-01240 — RF サンプリング S バンド レーダー トランスミッタのリファレンス デザイン
TIDA-01084 — 連続波の位相整列マルチトーン ジェネレータ:DC ~ 6GHz RF サンプリング DAC リファレンス デザイン
このリファレンス デザインでは、動作理論、GUI の説明、外部パターン ジェネレータを必要とせずに、トーンを生成する NCO プログラミングの指示を説明しています。このデザインは、連続波形を生成するための部品表 (...)
パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
---|---|---|
VQFN (RGT) | 16 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点