主页 放大器 运算放大器 (op amps) 高速运算放大器 (GBW ≥ 50MHz)
主页
放大器
运算放大器 (op amps)
高速运算放大器 (GBW ≥ 50MHz)
新

THS3470

预发布

60V、100MHz、1A 输出电流、高速功率放大器

立即订购
数据表

THS3470

预发布
数据表 立即订购

产品详情

Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 12 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 60 GBW (typ) (MHz) 100 BW at Acl (MHz) 160 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 5000 Vn at flatband (typ) (nV√Hz) 1.7 Vn at 1 kHz (typ) (nV√Hz) 3.15 Iq per channel (typ) (mA) 33 Vos (offset voltage at 25°C) (max) (mV) 1.1 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 72 Input bias current (max) (pA) 18000000 Offset drift (typ) (µV/°C) 2 Iout (typ) (mA) 1000 2nd harmonic (dBc) 90 3rd harmonic (dBc) 79 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 12 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 60 GBW (typ) (MHz) 100 BW at Acl (MHz) 160 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 5000 Vn at flatband (typ) (nV√Hz) 1.7 Vn at 1 kHz (typ) (nV√Hz) 3.15 Iq per channel (typ) (mA) 33 Vos (offset voltage at 25°C) (max) (mV) 1.1 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 72 Input bias current (max) (pA) 18000000 Offset drift (typ) (µV/°C) 2 Iout (typ) (mA) 1000 2nd harmonic (dBc) 90 3rd harmonic (dBc) 79 Frequency of harmonic distortion measurement (MHz) 10
VQFN (REB) 42 49 mm² 7 x 7

  • Bandwidth (VS = ±20V, VO = 30VPP, RFB = 1.2kΩ):

    • Small-signal: 100MHz
    • Large-signal: 80MHz
    • Large-signal: 20MHz (VS = ±30V, VO = 50VPP, RFB = 2kΩ)

  • Slew rate (20-80%, CLOAD = 300pF):

    • 5000V/µs (VOUT = 20VPP, RFB = 1.2kΩ)
    • 2800V/µs (VOUT = 50VPP, RFB = 2kΩ

  • Output current:

    • Linear output current: ±1.5A
    • Peak output current: > 2A
    • 250mV VOUT swing in linear range (IOUT = ±1A, VOUT = ±25V, VS = ±30V)

  • Diagnostic features:

    • Programmable current limit (200mA to 1.5A, separate source and sink)
    • Die temperature and current output monitoring
    • Diagnostic flags (temperature, current source, current sink)

  • Bandwidth (VS = ±20V, VO = 30VPP, RFB = 1.2kΩ):

    • Small-signal: 100MHz
    • Large-signal: 80MHz
    • Large-signal: 20MHz (VS = ±30V, VO = 50VPP, RFB = 2kΩ)

  • Slew rate (20-80%, CLOAD = 300pF):

    • 5000V/µs (VOUT = 20VPP, RFB = 1.2kΩ)
    • 2800V/µs (VOUT = 50VPP, RFB = 2kΩ

  • Output current:

    • Linear output current: ±1.5A
    • Peak output current: > 2A
    • 250mV VOUT swing in linear range (IOUT = ±1A, VOUT = ±25V, VS = ±30V)

  • Diagnostic features:

    • Programmable current limit (200mA to 1.5A, separate source and sink)
    • Die temperature and current output monitoring
    • Diagnostic flags (temperature, current source, current sink)

The THS3470 is a high-speed current-feedback amplifier (CFA) with a high linear-output current drive (1A), high slew rate (4000V/µs), and wide supply range (60V). The device is stable over a wide range of capacitive loads and supports up to 2A of peak output current that these applications require. The THS3470 has a bandwidth of 100MHz with low-noise and distortion providing great large-signal performance for heavy resistive loads as well.

In addition to high speed and power performance, the THS3470 features a number of useful features such as temperature monitoring, output current monitoring, output current limiting, and output current protection. The output current features of the device can be manually enabled or driven by various flag outputs from the device providing even greater modularity in the use case of the device.

The THS3470 is available in a VQFN-42 (REB) package, providing small-size with an exposed top-side thermal pad for direct heat transfer to a heat sink. The THS3470 is characterized for operation over the wide temperature range of –40°C to +85°C.

The THS3470 is a high-speed current-feedback amplifier (CFA) with a high linear-output current drive (1A), high slew rate (4000V/µs), and wide supply range (60V). The device is stable over a wide range of capacitive loads and supports up to 2A of peak output current that these applications require. The THS3470 has a bandwidth of 100MHz with low-noise and distortion providing great large-signal performance for heavy resistive loads as well.

In addition to high speed and power performance, the THS3470 features a number of useful features such as temperature monitoring, output current monitoring, output current limiting, and output current protection. The output current features of the device can be manually enabled or driven by various flag outputs from the device providing even greater modularity in the use case of the device.

The THS3470 is available in a VQFN-42 (REB) package, providing small-size with an exposed top-side thermal pad for direct heat transfer to a heat sink. The THS3470 is characterized for operation over the wide temperature range of –40°C to +85°C.
filter 查找其他 高速运算放大器 (GBW ≥ 50MHz)
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 4
类型 标题 下载最新的英语版本 日期
* 数据表 THS3470 60V, 1A, 100MHz, High-Speed Power Amplifier 数据表 PDF | HTML 2025年 4月 17日
EVM 用户指南 THS3470 评估模块 PDF | HTML 英语版 PDF | HTML 2025年 5月 5日
证书 THS3470REBEVM EU Declaration of Conformity (DoC) 2025年 2月 6日
应用手册 Noise Analysis for High Speed Op Amps (Rev. A) 2005年 1月 17日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

THS3470REBEVM — THS3470 评估模块

THS3470EVM 是一款评估模块 (EVM)，专为轻松测量和设置 THS3470 60V、1A、100MHz 高速功率放大器而设计。该电路板包含可轻松配置输入和输出连接的说明、用于更改器件功能模式的简单控制接口，以及面向散热器和风扇连接的配置。

用户指南: PDF | HTML
英语版: PDF | HTML
TI.com 上无现货
计算工具

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常运用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算列表，从使用反馈电阻器设置运算放大器增益到选择合适的电路设计元件，以稳定模数转换器 (ADC) 驱动器缓冲器电路。

除了可用作独立工具之外，该计算器还能很好地与模拟工程师口袋参考中所述的概念配合使用。

View Options
计算工具

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
立即设计
模拟工具

PSPICE-FOR-TI — PSpice® for TI 设计和仿真工具

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
模拟工具

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表 

需要 HSpice (...)

用户指南: PDF
英语版 (Rev.A): PDF
View Options
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (REB) 42 Ultra Librarian
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频