Home Power management Multi-channel ICs (PMICs)
Home
Power management
Multi-channel ICs (PMICs)

TPS653860-Q1

ACTIVE

Automotive 2.3-V to 36-V, 2.8-A power management IC (PMIC) for safety-relevant applications

Order now
Data sheet

TPS653860-Q1

ACTIVE
Data sheet Order now

Product details

Processor supplier Infineon, NXP, Renesas, Texas Instruments Product type Microcontrollers Regulated outputs (#) 7 LDO 6 Vin (min) (V) 2.3 Vin (max) (V) 36 Iout (max) (A) 2.8 Configurability Factory programmable, Software configurable TI functional safety category Functional Safety-Compliant Features Automotive qualified, Diagnostics, SPI Interface, Safety power supply, Spread Spectrum, Wide VIN Rating Automotive Operating temperature range (°C) -40 to 125 Switching frequency (typ) (kHz) 2200
Processor supplier Infineon, NXP, Renesas, Texas Instruments Product type Microcontrollers Regulated outputs (#) 7 LDO 6 Vin (min) (V) 2.3 Vin (max) (V) 36 Iout (max) (A) 2.8 Configurability Factory programmable, Software configurable TI functional safety category Functional Safety-Compliant Features Automotive qualified, Diagnostics, SPI Interface, Safety power supply, Spread Spectrum, Wide VIN Rating Automotive Operating temperature range (°C) -40 to 125 Switching frequency (typ) (kHz) 2200
HTSSOP (DCA) 48 101.25 mm² 12.5 x 8.1
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device temperature grade 0: –40°C to +150°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant (targets, confirmed on device release)
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D
    • Systematic capability and hardware integrity up to ASIL D
  • Input voltage range
    • 5 to 36V for initial power up
    • 3.5 to 36V full functionality after initial power up, limited operation to 2.3V
  • Output Supply Rails
    • Synchronous buck-boost preregulator with configurable spread-spectrum, 4.3V, 5 V, 6V or 6.8V and low IQ mode with the following options:
      • 2.8A in buck mode (option 0 variant)
      • 1.5A in buck mode (option 1 variant)
    • Four LDOs: 1.0V to 1.8V in 50mV steps, 2.5 V, 3.0V, 3.3V, 5V, bypass or voltage monitor mode. Each LDO with independent configurable current limit.
      • LDO1 and LDO2: Low IQ, up to 600mA
      • LDO3 and LDO4: low noise, low IQ, 1% accuracy, up to 225mA
    • Two protected LDOs for sensor or peripheral supplies, PLDO1 and PLDO2
      • Configurable for tracking mode or fixed output/VMON mode configurable for 1.0V to 1.8V in 50mV steps, 2.5V, 3.0V, 3.3V or 5V up to 200mA
      • Short-to-chassis (–2V) and supply (+36V) protection
  • Power sequence control:
    • Configurable power-up and down sequences (NVM default including output voltages)
    • Output rails, external voltage monitor and external enable signals can be included
  • Monitoring, protection and diagnostics
    • Undervoltage and overvoltage monitoring on all regulator outputs, battery voltage, and internal supplies
    • Two external voltage monitors (pins)
    • All regulator outputs protected with independent current limit
    • All regulators protected with independent overtemperature prewarning and shutdown
    • Watchdog: configurable for open and close window or question-answer
    • Error signal monitor (ESM) for monitoring MCU error output (PWM and level modes)
    • SAFE state for device and system protection
    • Clock monitor for internal oscillators
    • Analog and logic built-in self-test (BIST)
    • CRC on non-volatile memory (NVM), device configuration registers, and SPI communication
    • Diagnostic output pin: multiplexes analog and digital signals to MCU ADC and input
  • Compare module: 2 channels configurable as general purpose comparators or up to 4 channels of voltage monitoring
  • Timer (low IQ) for wake-up and measurement, 64µs to 203.6 days
  • SPI for configuration, status and error reporting
  • Reset output (NRST), two configurable safing outputs (SAFE_OUTx) for system safe state on detected faults interrupt output (NINT), and power good output (PGOOD)
  • Two configurable wake-up pins (WAKEx)
  • 48-Pin HTSSOP PowerPAD™ IC package
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device temperature grade 0: –40°C to +150°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Compliant (targets, confirmed on device release)
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D
    • Systematic capability and hardware integrity up to ASIL D
  • Input voltage range
    • 5 to 36V for initial power up
    • 3.5 to 36V full functionality after initial power up, limited operation to 2.3V
  • Output Supply Rails
    • Synchronous buck-boost preregulator with configurable spread-spectrum, 4.3V, 5 V, 6V or 6.8V and low IQ mode with the following options:
      • 2.8A in buck mode (option 0 variant)
      • 1.5A in buck mode (option 1 variant)
    • Four LDOs: 1.0V to 1.8V in 50mV steps, 2.5 V, 3.0V, 3.3V, 5V, bypass or voltage monitor mode. Each LDO with independent configurable current limit.
      • LDO1 and LDO2: Low IQ, up to 600mA
      • LDO3 and LDO4: low noise, low IQ, 1% accuracy, up to 225mA
    • Two protected LDOs for sensor or peripheral supplies, PLDO1 and PLDO2
      • Configurable for tracking mode or fixed output/VMON mode configurable for 1.0V to 1.8V in 50mV steps, 2.5V, 3.0V, 3.3V or 5V up to 200mA
      • Short-to-chassis (–2V) and supply (+36V) protection
  • Power sequence control:
    • Configurable power-up and down sequences (NVM default including output voltages)
    • Output rails, external voltage monitor and external enable signals can be included
  • Monitoring, protection and diagnostics
    • Undervoltage and overvoltage monitoring on all regulator outputs, battery voltage, and internal supplies
    • Two external voltage monitors (pins)
    • All regulator outputs protected with independent current limit
    • All regulators protected with independent overtemperature prewarning and shutdown
    • Watchdog: configurable for open and close window or question-answer
    • Error signal monitor (ESM) for monitoring MCU error output (PWM and level modes)
    • SAFE state for device and system protection
    • Clock monitor for internal oscillators
    • Analog and logic built-in self-test (BIST)
    • CRC on non-volatile memory (NVM), device configuration registers, and SPI communication
    • Diagnostic output pin: multiplexes analog and digital signals to MCU ADC and input
  • Compare module: 2 channels configurable as general purpose comparators or up to 4 channels of voltage monitoring
  • Timer (low IQ) for wake-up and measurement, 64µs to 203.6 days
  • SPI for configuration, status and error reporting
  • Reset output (NRST), two configurable safing outputs (SAFE_OUTx) for system safe state on detected faults interrupt output (NINT), and power good output (PGOOD)
  • Two configurable wake-up pins (WAKEx)
  • 48-Pin HTSSOP PowerPAD™ IC package

The TPS65386x-Q1 device is a multirail power supply designed to supply microcontrollers, sensors, transceivers and peripherals in safety relevant applications.

The TPS65386x-Q1 device is a multirail power supply designed to supply microcontrollers, sensors, transceivers and peripherals in safety relevant applications.

filter Find other Multi-channel ICs (PMICs)
Download View video with transcript Video
Request more information

The full data sheet and other information are available. Request now

Functional safety documents are available. Request now

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TPS653860/61-Q1 Power Management IC For Safety-Relevant Applications datasheet (Rev. A) PDF | HTML 25 Nov 2024
Design guide F29x Power-Supply Design Using the TPS653860-Q1 for Safety-Relevant Applications PDF | HTML 09 Dec 2025
Design guide AM263Px Power-Supply Design Using the TPS653860-Q1 for Safety-Relevant Applications PDF | HTML 19 Nov 2025

Design & development

Power-supply solutions

Explore solutions that include the TPS653860-Q1. TI offers power-supply solutions for TI and non-TI systems on a chip (SoCs), processors, microcontrollers, sensors, and field-programmable gate arrays (FPGAs).

View solutions
Evaluation board

AM261-SOM-EVM — AM261x control system-on-module (SOM) evaluation module

AM261-SOM-EVM is an evaluation and development board for the Texas Instruments' Sitara™ AM261x series of microcontrollers (MCUs). The System-On-Module design with three 120-pin high-speed, high-density connectors is an excellent choice for initial evaluation and rapid prototyping. An XDS110ISOEVM (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

F29H85X-SOM-EVM — F29H85x controlSOM evaluation module

To evaluate the F29H85X-SOM-EVM, the separate purchase of XDS110ISO-EVM debug probe is required.

The HSEC180ADAPEVM and TMDSHSECDOCK can be optionally purchased separately for backward compatibility with controlCARD-based platforms.

F29H85X-SOM-EVM is an evaluation and development board for TI (...)

User guide: PDF | HTML
Not available on TI.com
Evaluation board

TIPA-050072 — AM263Px power-supply design using the TPS653860-Q1 for safety-relevant applications

This power design can be used as a guide for integrating the TPS65386x-Q1 Power Management IC (PMIC) into safety-relevant automotive systems powering the functional safety (FuSa) AM263Px Sitara™ processor.
View Options
Evaluation board

TIPA-050073 — F29x power-supply design using the TPS653860-Q1 for safety-relevant applications

This power design can be used as a guide for integrating the TPS65386x-Q1 Power Management IC (PMIC) into safety-relevant automotive systems powering the functional safety (FuSa) F29x C2000™ microcontroller (MCU).
View Options
Evaluation board

TIPA-050074 — AM261x power-supply design using the TPS653860-Q1 for safety-relevant applications

This power design can be used as a guide for integrating the TPS65386x-Q1 Power Management IC (PMIC) into safety-relevant automotive systems powering the functional safety (FuSa) AM261x Sitara™ microcontroller (MCU).

View Options
Evaluation board

TMDSCNCD263P — AM263Px general-purpose controlCARD™ development kit Arm®-based MCU

TMDSCNCD263P is an HSEC180 controlCARD-based evaluation and development tool for the AM263Px series Sitara™ high-performance microcontrollers. This board is ideal for initial evaluation and prototyping as it provides a standardized and easy-to-use platform to develop your next application. (...)

User guide: PDF | HTML
Not available on TI.com
Evaluation board

TPS65386001Q1EVM — TPS653860-Q1 evaluation module

The TPS65386xxx-Q1 device is a multirail power supply designed to supply microcontrollers, sensors, transceivers and peripherals in safety relevant applications. The device supports functional safety microcontrollers with dual-core lockstep and other multi-core architectures. The TPS65386xxx-Q1 (...)
Not available on TI.com
Driver or library

TPS653860-Q1-DEMO — TPS653860-Q1 demo design

Safety MCU Demo designs
Supported products & hardware

Supported products & hardware

Products
Multi-channel ICs (PMICs)
  • TPS653860-Q1 — Automotive 2.3-V to 36-V, 2.8-A power management IC (PMIC) for safety-relevant applications
Request
GUI for evaluation module (EVM)

TPS65386X-GUI — TPS65386x-GUI Graphical User Interface (GUI)

Graphical user interface used to communicate with the TPS65386x-Q1 PMIC through SPI and evaluate device functionality and performance.
Supported products & hardware

Supported products & hardware

Products
Multi-channel ICs (PMICs)
  • TPS653860-Q1 — Automotive 2.3-V to 36-V, 2.8-A power management IC (PMIC) for safety-relevant applications
Hardware development
Evaluation board
Launch
Reference designs

TIDA-020079 — Zone reference design

This reference design demonstrates key functions of next-generation zone control modules including power distribution, load actuation and in-vehicle networking. The design highlights functional safety-compliant PMIC and microcontroller (MCU) design, redundant power supply management with ideal (...)
Design guide: PDF
Reference designs

PMP41078 — High-voltage to low-voltage DC-DC converter reference design with GaN HEMT

This reference design describes a 3.5kW highvoltage to low-voltage DC-DC converter with 650V Gallium nitride (GaN) high-electron mobility transistors (HEMT). Using LMG3522R030 as primary switches makes the converter work at a high switching frequency. In this design, the converter uses a smaller (...)
Test report: PDF
Reference designs

TIDM-02014 — High-power, high-performance automotive SiC traction inverter reference design

TIDM-02014 is a 800-V, 300kW SiC-based traction inverter system reference design developed by Texas Instruments and Wolfspeed provides a foundation for OEMs and design engineers to create high-performance, high-efficiency traction inverter systems and get to market faster. This solution (...)
Design guide: PDF
Reference designs

PMP41139 — 3.5kW, 800V to 14V DC/DC converter reference design

This reference design describes a 3.5kW, 800V to 14V DC-DC converter with 650V Gallium nitride (GaN) high-electron mobility transistors (HEMT). Using stacked half-bridge (SHB) topology makes the converter work at 800V with 650V GaN HEMT. Using LMG3522R030 as primary switches makes the converter (...)
Test report: PDF
Package Pins CAD symbols, footprints & 3D models
HTSSOP (DCA) 48 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos