首頁 馬達驅動器 無刷 DC (BLDC) 馬達驅動器 整合式控制 BLDC 驅動器
首頁
馬達驅動器
無刷 DC (BLDC) 馬達驅動器
整合式控制 BLDC 驅動器

MCF8316C-Q1

現行
立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的裝置。
MCF8316D 現行 具有 UL 認可變體的 40V（最大值）8A（峰值）、無感測器 FOC 三相 BLDC 馬達驅動器 Industrial version with improved algorithm features such as flux weakening, lead angle adjustment, and optional UL recognized variant
MCF8316D-Q1 現行 車用 40V 最大值、8A 峰值無感測器 FOC 控制三相 BLDC 馬達驅動器 Improved algorithm features such as flux weakening, lead angle adjustment, and EEPROM security

MCF8316C-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Automotive Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² (7 mm × 5 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET)
    • 5-point configurable speed profile support
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Configurable motor start-up and stop options
    • Anti-voltage surge (AVS) protection
    • Improved acoustic performance with soft-start, soft-stop and dead time compensation
    • Variable monitoring through DACOUT pins
  • 4.5- to 35-V operating voltage (40-V abs max)
  • High output current capability: 8-A peak
  • Low MOSFET on-state resistance
    • RDS(ON) (HS + LS) at TA = 25°C : 95-mΩ (typ.)
  • Low power sleep mode: Refer
    • 5-µA (maximum) at VVM = 24-V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Customer-configurable non-volatile memory (EEPROM) to store device configuration
  • Supports up to 60-kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3-V, 20-mA LDO regulator
  • Built-in 3.3-V/5-V, 170-mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection (5 different types)
    • Over current protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • AEC-Q100 qualified for automotive applications
    • Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET)
    • 5-point configurable speed profile support
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Configurable motor start-up and stop options
    • Anti-voltage surge (AVS) protection
    • Improved acoustic performance with soft-start, soft-stop and dead time compensation
    • Variable monitoring through DACOUT pins
  • 4.5- to 35-V operating voltage (40-V abs max)
  • High output current capability: 8-A peak
  • Low MOSFET on-state resistance
    • RDS(ON) (HS + LS) at TA = 25°C : 95-mΩ (typ.)
  • Low power sleep mode: Refer
    • 5-µA (maximum) at VVM = 24-V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Customer-configurable non-volatile memory (EEPROM) to store device configuration
  • Supports up to 60-kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3-V, 20-mA LDO regulator
  • Built-in 3.3-V/5-V, 170-mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection (5 different types)
    • Over current protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCF8316C-Q1 provides a single-chip, code-free sensorless FOC device for customers driving speed-controlled 12- to 24-V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 8-A peak current. The MCF8316C-Q1 integrates three ½-bridges with 40-V absolute maximum capability and a very low RDS(ON) of 95 mΩ (high-side + low-side FETs). MCF8316C-Q1 integrates power management circuits including an voltage-adjustable buck regulator (3.3 V / 5 V, 170-mA) and LDO (3.3 V / 20 mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8316C-Q1, intended to protect the device, motor, and system against fault events.

Documentation for reference:

The MCF8316C-Q1 provides a single-chip, code-free sensorless FOC device for customers driving speed-controlled 12- to 24-V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 8-A peak current. The MCF8316C-Q1 integrates three ½-bridges with 40-V absolute maximum capability and a very low RDS(ON) of 95 mΩ (high-side + low-side FETs). MCF8316C-Q1 integrates power management circuits including an voltage-adjustable buck regulator (3.3 V / 5 V, 170-mA) and LDO (3.3 V / 20 mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8316C-Q1, intended to protect the device, motor, and system against fault events.

Documentation for reference:

filter 尋找其它 整合式控制 BLDC 驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
最新 MCF8329HS-Q1 現行 車用，12V 和 24V，無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器 Higher speed FOC and external FETs for higher power operation

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 MCF8316C-Q1 Sensorless Field Oriented Control (FOC) Integrated FET BLDC Driver datasheet (Rev. A) PDF | HTML 2026/7/14
應用說明 Getting Started with MOTORSTUDIO (Rev. A) PDF | HTML 2026/6/9
白皮書 未來 SDV 車輛內部：整合遙控邊緣 節點 PDF | HTML Download English Version PDF | HTML 2025/9/26
應用說明 MCF83xx - Open Loop to Closed Loop Handoff Tuning PDF | HTML 2025/4/15
應用說明 How to Program I2C for MCx83xx Device Family PDF | HTML 2025/3/24
應用說明 Motor Pre-Startup Tuning for MCx83xx PDF | HTML 2025/3/24
應用說明 How to Optimize MCF8315 Hardware Design in Fan Application PDF | HTML 2025/3/17
應用說明 MCF83xx and MCT83xx EEPROM Read and Write Procedure PDF | HTML 2025/3/13
應用說明 PCB Design Guidelines for MCF8316C and MCF8315C PDF | HTML 2024/8/21

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MCF8316AEVM — 適用三相無感測器 FOC 整合式 MOSFET BLDC 馬達驅動器的 MCF8316 評估模組

MCF8316 為三個半全橋整合式 MOSFET 驅動器，適用 4.5-V 至 35-V、8-A 尖峰電流驅動之三相無刷 DC (BLDC) 馬達的無感測器 FOC 控制。MCx8316 整合降壓穩壓器，可透過可編程穩壓電源支援 200mA。

此 EVM 包括板載 MSP430 (MSP430FR2355)，可用做與 Motor Studio (MOTORSTUDIO) GUI 連接的介面。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

MOTORSTUDIO-GUI — Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio 是簡易型圖形使用者介面 (GUI)，可簡化無刷 DC (BLDC) 馬達驅動器的調節程序，縮減裝置評估及產品開發時間。GUI 可讓使用者快速啟動馬達，並將各種馬達運轉階段最佳化，以達到最高馬達性能，穩定馬達啟動與最低雜訊。

支援產品和硬體
計算工具

BLDC-MCF831XC-TO-MCF831XD-CONVERSION-CALC — Register Map conversion tool - from MCF831xC to MCF831xD

Excel-based register map converter to automatically convert register contents from MCF831xC to MCF831xD. Input the register map of MCF831xC to generate the converted register map and use the output values directly for the MCF831xD.
支援產品和硬體
計算工具

BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool

Calculates the thermals of a BLDC integrated MOSFET driver based on user input system parameters
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGF) 40 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片