主页 音频 音频转换器 音频编解码器
主页
音频
音频转换器
音频编解码器
新

TAC5301-Q1

正在供货

具有 101dB ADC、110dB DAC 和可编程高压麦克风偏置的汽车级单声道音频编解码器

立即订购
数据表

TAC5301-Q1

正在供货
数据表 立即订购

产品详情

Number of ADC channels 1 Number of DAC channels 1 Digital audio interface L Analog inputs 1 Analog outputs 1 Sampling rate (max) (kHz) 192 Rating Automotive Features Low latency, Mic bias, Phase-locked loop (PLL), Thermal Foldback ADC SNR (typ) (dB) 101 DAC SNR (typ) (dB) 110 Operating temperature range (°C) -40 to 125
Number of ADC channels 1 Number of DAC channels 1 Digital audio interface L Analog inputs 1 Analog outputs 1 Sampling rate (max) (kHz) 192 Rating Automotive Features Low latency, Mic bias, Phase-locked loop (PLL), Thermal Foldback ADC SNR (typ) (dB) 101 DAC SNR (typ) (dB) 110 Operating temperature range (°C) -40 to 125
VQFN (RGE) 24 16 mm² 4 x 4
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Mono audio ADC channel
    • Performance:
      • Line/Microphone differential input dynamic range: 100dB
      • Differential input THD+N: –87dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • ADC sample rates (fS) = 8kHz to 192kHz
    • Programmable microphone bias (3V to 10V):
      • With external high voltage HVDD supply
  • Mono differential or Stereo single-ended audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 110dB
      • DAC to differential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/Headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rates (fs) = 8kHz to 192kHz
  • Common Features
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word Length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low Power Modes
    • Single supply operation AVDD: 3.3V
    • I/O supply operation: 1.2V, 1.8V or 3.3V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Mono audio ADC channel
    • Performance:
      • Line/Microphone differential input dynamic range: 100dB
      • Differential input THD+N: –87dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • ADC sample rates (fS) = 8kHz to 192kHz
    • Programmable microphone bias (3V to 10V):
      • With external high voltage HVDD supply
  • Mono differential or Stereo single-ended audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 110dB
      • DAC to differential headphone-out dynamic range: 109dB
      • THD+N: –101dB
    • Line-out/Headphone output voltage:
      • Differential, 2VRMS full-scale
      • Psuedo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rates (fs) = 8kHz to 192kHz
  • Common Features
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word Length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low Power Modes
    • Single supply operation AVDD: 3.3V
    • I/O supply operation: 1.2V, 1.8V or 3.3V

The TAC5301-Q1 is an automotive, low-power mono audio codec with 2VRMS differential input, 100dB dynamic range ADC and a DAC with 2VRMS differential output, 110dB dynamic range mono channel or 1VRMS single-ended output, 107dB dynamic range stereo channels. The TAC5301-Q1 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. Further, the device has the capability to directly use an external high-voltage supply (HVDD), which is any readily available supply in the system to generate a high-voltage, programmable microphone bias. The TAC5301-Q1 integrates programmable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra low-latency filter modes and supports sample rates up to 192kHz for both the ADC and DAC signal chains. The TAC5301-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C. These integrated high-performance features, along with a single, 3.3V supply operation, make TAC5301-Q1 an excellent choice for space-constrained automotive systems.

The TAC5301-Q1 is an automotive, low-power mono audio codec with 2VRMS differential input, 100dB dynamic range ADC and a DAC with 2VRMS differential output, 110dB dynamic range mono channel or 1VRMS single-ended output, 107dB dynamic range stereo channels. The TAC5301-Q1 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. Further, the device has the capability to directly use an external high-voltage supply (HVDD), which is any readily available supply in the system to generate a high-voltage, programmable microphone bias. The TAC5301-Q1 integrates programmable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra low-latency filter modes and supports sample rates up to 192kHz for both the ADC and DAC signal chains. The TAC5301-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C. These integrated high-performance features, along with a single, 3.3V supply operation, make TAC5301-Q1 an excellent choice for space-constrained automotive systems.
filter 查找其他 音频编解码器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 1
类型 标题 下载最新的英语版本 日期
* 数据表 TAC5301-Q1 Automotive mono audio codec with 101dB ADC, 110dB DAC and programmable high-voltage micbias 数据表 PDF | HTML 2025年 4月 28日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

应用软件和框架

PUREPATHCONSOLE — 适用于音频系统设计和开发的 PurePath™ Console 图形开发套件

PurePath™ 控制台是一款易于使用的高度集成音频开发套件，专用于简化与音频产品开发有关的评估、配置和调试过程。观看视频，了解 PurePath™ Console 3 软件的使用多么轻松。
PurePath 控制台的直观图形界面使音频设计非常直接，因为无需高级音频设计专业知识。以缩短生产开发时间为目的的易用图形界面中提供了许多 PurePath 控制台高级控制功能，这些功能有助于实现高度优化的音频性能、最低功耗和无缝系统集成。

支持的器件：

PurePath™ Console 1：PCM5142、TAS5721、TAS5729MD、TAS5731 和 TAS5760xx
PurePath™ (...)
View Options
支持软件

TAC5X1X-Q1-SW — TAx5x1x-Q1 files. Requires PUREPATHCONSOLE installed.

TAx5x1x-Q1 files. Requires PUREPATHCONSOLE installed.
支持的产品和硬件

支持的产品和硬件

产品
音频编解码器
TAC5112 — 具有 105dB 动态范围 ADC 和 114dB 动态范围 DAC 的低功耗、立体声音频编解码器 TAC5111 — 具有 105dB 动态范围 ADC 和 114dB 动态范围 DAC 的低功耗、单声道音频编解码器 TAC5111-Q1 — 具有 105dB 动态范围 ADC、114dB 动态范围 DAC 的汽车级低功耗单声道音频编解码器 TAC5112-Q1 — 具有 105dB 动态范围 ADC、114dB 动态范围 DAC 的汽车级低功耗立体声音频编解码器 TAC5212 — 具有 119dB 动态范围 ADC 和 120dB 动态范围 DAC 的高性能立体声音频编解码器 TAC5212-Q1 — 具有 119dB 动态范围 ADC、120dB 动态范围 DAC 的汽车级高性能立体声音频编解码器 TAC5211 — 具有 119dB 动态范围 ADC 和 120dB 动态范围 DAC 的高性能单声道音频编解码器 TAC5411-Q1 — 具有 114dB ADC、120dB DAC、高压输入、麦克风偏置和诊断功能的汽车级单声道音频编解码器 TAC5412-Q1 — 具有 112dB ADC、120dB DAC、高压输入、麦克风偏置和诊断功能的汽车级立体声音频编解码器 TAC5301-Q1 — 具有 101dB ADC、110dB DAC 和可编程高压麦克风偏置的汽车级单声道音频编解码器 TAC5311-Q1 — 具有 104dB ADC、114dB DAC、高压输入、麦克风偏置和诊断功能的汽车级单声道音频编解码器 TAC5312-Q1 — 具有 104dB ADC、114dB DAC、高压输入、麦克风偏置和诊断功能的汽车级立体声音频编解码器
音频 DAC
TAD5212 — 具有 120dB 动态范围以及耳机和线路驱动器的高性能立体声音频 DAC TAD5212-Q1 — 具有 120dB 动态范围以及耳机和线路驱动器的汽车级高性能立体声音频 DAC TAD5112 — 具有 110dB 动态范围以及耳机和线路驱动器的低功耗立体声音频 DAC TAD5112-Q1 — 具有 110dB 动态范围以及耳机和线路驱动器的汽车低功耗立体声音频 DAC
音频 ADC
TAA5212 — 具有 119dB 动态范围和可配置的数字滤波器的高性能立体声音频 ADC TAA5412-Q1 — 具有 112dB 动态范围、高压输入、麦克风偏置和诊断功能的汽车级立体声音频 ADC
硬件开发
评估板
TAC5212EVM-K — TAC5212 评估模块 TAC5112EVM-K — TAC5112 评估模块 TAA5212EVM-K — TAA5212 评估模块 TAD5212EVM-K — TAD5212 评估模块
发送申请
模拟工具

PSPICE-FOR-TI — PSpice® for TI 设计和仿真工具

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (RGE) 24 Ultra Librarian
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频