LP-MSPM0H3216
32MHz Arm® Cortex®-M0+ マイクロ コントローラ用 MSPM0H3216 LaunchPad™ 開発キット
LP-MSPM0H3216
概要
MSPM0H3216 LaunchPad™ 開発キットは、MSPM0H3216 マイコン (MCU) 向けの使いやすい評価基板 (EVM) です。LaunchPad キットは、プログラミング、デバッグを行うためのオンボード デバッグ プローブなど、MSPM0H321x マイコン プラットフォームの開発を開始するために必要なすべての機能を搭載しています。このボードには、シンプルなユーザー インターフェイスをすばやく統合するためのオンボード ボタン、LED、RGB LED も搭載されています。
MSPM0H3216 は、32MHz の最大周波数を持つ Arm®Cortex®32 ビット M0+ CPU です。このデバイスには、64KB の組込みフラッシュ メモリと、8KB のオンチップ RAM が搭載されています。このデバイスは、内部 ADC、電圧リファレンス、8 ビット DAC を搭載したコンパレータなどの内部アナログも備えています。MSPM0H3216 は、家電、産業用、車載、その他の 5V アプリケーションで広く使用できる初めての 5V MSPM0 デバイスです。
特長
- オンボード XDS110 デバッグ プローブ
- USB 経由で PC に接続するバックチャネル UART
- USB 電源
- 40 ピンのブースタパック ピン ヘッダー
- ADC 入力用の RC フィルタ
- ハードウェア ユーザー インターフェイス
- ボタン 2 つ、RGB LED 1 つ、赤色 LED 1 つ
- 外部クロックの水晶振動子
Arm Cortex-M0+ マイコン
購入と開発の開始
LP-MSPM0H3216 — MSPM0H3216 32MHz Arm Cortex-M0+ マイコン向け LaunchPad 開発キット
LP-MSPM0H3216 — MSPM0H3216 32MHz Arm Cortex-M0+ マイコン向け LaunchPad 開発キット
CCSTUDIO — Code Composer Studio 統合開発環境(IDE)
サポート対象の製品とハードウェア
こちらの設計リソースは、このカテゴリに属する製品の大半をサポートしています。
サポート状況を確認するには、製品の詳細ページをご覧ください。
ハードウェア開発
評価ボード
開発キット
CCSTUDIO — Code Composer Studio 統合開発環境(IDE)
こちらの設計リソースは、このカテゴリに属する製品の大半をサポートしています。
サポート状況を確認するには、製品の詳細ページをご覧ください。
ハードウェア開発
評価ボード
開発キット
資料
リリース情報
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.
CCS v20 is TI’s next generation Integrated Development Environment (IDE) based on Theia IDE framework. CCS v20.4.0 uses a modified version of the Theia-IDE framework and offers a user experience similar to Visual Studio Code™.
- Installation instructions and User's Guide
- Windows 32bit is not supported with CCSv20.
- XDS510 class debug probes are not supported with CCSv20.
最新情報
- Improved project wizard interface for discovering relevant examples
- Theia IDE core v1.64.1 update
- many IDE Enhancements (search/filter, build settings, display as array, column resize, graph view anchor, etc)
- C29 device support improvements
- Compiler, SysConfig, and device support all updated
- many bug fixes
- Energia projects are no longer supported
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
サポート対象の製品とハードウェア
製品
Arm Cortex-M0+ マイコン
ハードウェア開発
評価ボード
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio 1.02.00.08 for Windows
製品
Arm Cortex-M0+ マイコン
ハードウェア開発
評価ボード
資料
MSP Zero Code Studio 1.02.00.08 Manifest
MSP Zero Code Studio 1.02.00.08 Release Notes
リリース情報
MSP Zero Code Studio is a visual design environment that enables users to configure, develop and run microcontroller applications in minutes! Zero coding and no IDE required.
最新情報
- New Device Support! Added support for MSP Devices: MSPM0L112X, MSPM0L211X, MSPM0G511X, MSPM0G518X, MSPM0H321X, MSPM0C1105_C1106
- Logic Improvements: Use the output of ADC Read and Communication modules to drive Compare conditions
- PWM Duty Cycle Input: now you can connect the data output of other compatible blocks with PWM Update Duty Cycle.
- Group Drag & Drop: Drag and Drop elements directly into group blocks such as Loops & If/Else
- Addressed minor bug fixes.
- For more details, please refer to the MSP Zero Code Studio Release Notes
CCSTUDIO-STARTHUB — Example application browser
サポート対象の製品とハードウェア
製品
Arm Cortex-M0+ マイコン
ハードウェア開発
評価ボード
CCSTUDIO-STARTHUB — Example application browser
製品
Arm Cortex-M0+ マイコン
ハードウェア開発
評価ボード
リリース情報
General Information
StartHub v1.0.0 is the first release of the tool.
The goal of StartHub is to provide an ecosystem independent flow to get started with software development on TI embedded devices.
This tool provides a guided experience to help you find relevant code examples & quickly start development in the ecosystem of your choice (CCS, IAR, Keil, makefile development).
The tool can be accessed via https://dev.ti.com/starthub/ or by installing our desktop tool using the instructions below.
Note: StartHub v1.0.0 supports MSPM0 devices.
System Requirements
Operating System
Please note that StartHub is a 64bit application and thus will not run on 32bit operating systems.
Windows
- Windows 11 64bit
- Windows 10 64bit
Linux
Supported distributions include:
- Ubuntu 24.04 64bit
- Ubuntu 22.04 64bit
- Ubuntu 20.04 64bit
StartHub will run on other distributions but those are the officially supported and tested distributions. For more details on installation instructions as well as debug probe and device support please see this article on Linux Host Support.
MacOS
This release was validated with:
- MacOS 13 (Ventura)
- MacOS 14 (Sonoma)
- MacOS 15 (Sequoia)
- MacOS 15 (Sequoia)
- MacOS 26 (Tahoe)
Installation
Please note that use of anti-virus software or a firewall may cause issues during installation.
McAfee software in particular has been especially troublesome.
If possible, disable anti-virus and firewall software during installation.
If not, use of the Offline Installer is strongly recommended.
On Windows:
If you are using an Offline StartHub Installer, the zip file in which it is
distributed must first be extracted:
1. Right-click on StartHub_1.x.x.xxxxx_win64.zip and select "Extract All...".
2. Enter the directory where you wish to extract the files.
3. Click on Extract.
Once extraction has successfully completed, proceed with the installation steps below.
To install StartHUb:
1. Run starthub_setup_1.x.x.xxxxx.exe.
2. Choose where you want to install.
3. Select the components you wish to install.
On macOS:
Please visit https://software-dl.ti.com/ccs/esd/documents/ccs_macos_host_support.html
The offline installer is distributed as a disk image (.dmg files)
1. Right-click on StartHub_1.x.x.xxxxx_osx.dmg and select "Open”. This will open the disk image and mount it.
To install StartHub:
1. Run starthub_setup_1.x.x.xxxxx by clicking on the application in the Finder
2. Choose where you want to install.
3. Select the components you wish to install.
On Linux:
Please visit https://software-dl.ti.com/ccs/esd/documents/ccs_linux_host_support.html
before installing StartHub on Linux. It contains important information on
installing StartHub on different Linux distributions, including StartHub dependencies that may need to be installed first.
Before installing StartHub, the tarball file in which the StartHub Installer is distributed must first be extracted:
untar StartHub_1.x.x.xxxxx_linux-x64.tar.gz and extract all files.
e.g. tar xfz StartHub_1.x.x.xxxxx_linux-x64.tar.gz
Once extraction has successfully completed, proceed with the installation steps below.
To install all of StartHub:
1. Run starthub_setup_1.x.x.xxxxx.run.
2. Choose where you want to install.
3. Select the components you wish to install.
最新情報
- StartHub v1.0.0 is the first release of the tool.
MSPM0-COOLING-FAN-CONTROLLER-DEMO-APPSW — MSPM0 Cooling Fan Controller Demo
サポート対象の製品とハードウェア
製品
Arm Cortex-M0+ マイコン
ハードウェア開発
評価ボード
MSPM0-COOLING-FAN-CONTROLLER-DEMO-APPSW — MSPM0 Cooling Fan Controller Demo
製品
Arm Cortex-M0+ マイコン
ハードウェア開発
評価ボード
リリース情報
It is the software for the application note Cooling FAN Controller with MSPM0. There are three different demo code: FAN_Control_host_LP_MSPM0L1306, FAN_Controller_MSPM0C1104 and FAN_Controller_MSPM0H3216.
最新情報
- FAN_Control_host_LP_MSPM0L1306
- FAN_Controller_MSPM0C1104
- FAN_Controller_MSPM0H3216
MSP-GANG-SOFTWARE — MSP-GANG ソフトウェア
サポート対象の製品とハードウェア
製品
Arm Cortex-M0+ マイコン
MSP430 microcontrollers
ハードウェア開発
評価ボード
開発キット
MSP-GANG-SOFTWARE — MSP-GANG ソフトウェア
MSP-GANG Installer 1.03.09.00
製品
Arm Cortex-M0+ マイコン
MSP430 microcontrollers
ハードウェア開発
評価ボード
開発キット
資料
MSP-GANG Manifest
リリース情報
The MSP Gang Programmer is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the user to fully customize the process.
The MSP Gang Programmer is provided with an expansion board, called the Gang Splitter, that implements the interconnections between the MSP Gang Programmer and multiple target devices. Eight cables are provided that connect the expansion board to eight target devices (via JTAG or Spy-Bi-Wire connectors). The programming can be done with a PC or as a standalone device. A PC-side Graphical User Interface is also available and is DLL-based.
Features:
- Quickly and reliably program Flash or FRAM-based MSP devices via an RS-232 or USB interface
- Several programming modes:
- Interactive Mode Programming while connected to PC using the MSP GANG Programmer GUI
- Program from Image: An image can be stored, which contains configuration options and code files. This allows users to program MSP devices standalone, without a PC
- Programming from Script: Enables developers to automate more complicated programming procedures.
- Intuitive GUI for configuring, programming and testing production setup
- SD Card slot for storing images
- LCD screen for easy programming without a PC
- Supports up to 8 targets simultaneously
- Supports MSPM0/MSP430/MSP432 devices
最新情報
- Added low-power mode debug support for MSPM0
技術資料
| タイプ | タイトル | 最新の英語版をダウンロード | 日付 | |||
|---|---|---|---|---|---|---|
| * | EVM ユーザー ガイド (英語) | LP-MSPM0H3216 Evaluation Module User's Guide | PDF | HTML | 2024/09/05 | ||
| 証明書 | LP-MSPM0H3216 EU Declaration of Conformity (DoC) | 2025/04/14 |