TMAG5134
- Supply range: 1.65V to 5.5V
- Operating temperature range: –40°C to 125°C
- In-plane axis of sensitivity
- Integrated magnetic concentrator
- Magnetic pole detection options:
- Omnipolar
- Dual-unipolar
- Output type:
- Push-pull
- Open-drain
- Available in both active low and active high
- Magnetic operate points (BOP)
- 1mT
- 1.3mT
- 1.5mT
- 2mT
- Low average current consumption ICCAVG
- 1.25Hz: 0.5µA
- 5Hz: 0.6µA
- 10Hz: 0.9µA
- 20Hz: 1.4µA
- Industry standard package and pinout
- SOT-23 (DBV)
- X1LGA (ZFC)
The TMAG5134 is a high sensitivity, low power, in-plane hall effect digital switch designed to replace TMR, AMR and Reed switches. The TMAG5134 features an integrated magnetic concentrator to achieve higher sensitivity and lower power consumption than traditional hall effect devices.
The TMAG5134 product family is available in packages with either a single omni-polar output (SOT-23) or with two independent unipolar outputs (X1LGA). The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.
To minimize power consumption, the TMAG5134 is internally duty-cycled. The device has a push-pull (CMOS) output which eliminates the need for an external pullup resistor, and is available in industry standard SOT-23 and X1LGA packages. The TMAG5134 is also available in an open-drain configuration.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TMAG5134 High Sensitivity, In-Plane Hall-Effect Switch with Concentrator データシート | PDF | HTML | 2025年 7月 31日 | ||
アプリケーション・ノート | 経済的なコストおよび低消費電力の磁気スイッチングの設計 (Rev. A 翻訳版) | PDF | HTML | 最新英語版 (Rev.B) | PDF | HTML | 2025年 8月 11日 | |
アプリケーション・ノート | Replacing Reed and Magnetoresistive Switches With Cost-Effective, Low-Power Hall-Effect Switches (Rev. B) | PDF | HTML | 2025年 8月 5日 | |||
アプリケーション概要 | Benefits of Hall-Effect Sensors in Contact Sensors (Rev. B) | PDF | HTML | 2025年 7月 22日 | |||
アプリケーション概要 | How Hall-Effect Sensors are Used in Electronic Smart Locks (Rev. B) | PDF | HTML | 2025年 7月 22日 | |||
アプリケーション・ノート | Position Sensing in Electronic Smart Locks Using Hall-Effect Sensors (Rev. B) | PDF | HTML | 2025年 7月 22日 | |||
証明書 | TMAG5134EVM EU Declaration of Conformity (DoC) | 2025年 7月 1日 |
設計および開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
HALL-ADAPTER-EVM — ホール センサ ブレークアウト アダプタ評価モジュール
パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
---|---|---|
SOT-23 (DBV) | 3 | Ultra Librarian |
X1LGA (ZFC) | 4 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。