OPA690
- Unity-gain stable: 535MHz (G = 1V/V)
- High output current: 215mA
- High slew rate: 1900V/µs
- Low input voltage noise: 4.6nV/√Hz
- Low distortion (RL = 100Ω, VO = 2VPP):
- HD2, HD3 at 5MHz: –85dBc, –75dBc
- Output voltage swing: ±3.9V
- Low supply current: 6.1mA
- Low disable current: 100µA
- Supply range: 5V to 12V
The OPA690 device represents a major step forward in unity-gain stable, voltage-feedback op amps. A new input architecture provides slew rate and full-power bandwidth previously found only in wide-band, current-feedback op amps. A new output stage architecture delivers 215mA of current with a minimal headroom requirement. These capabilities combine to give exceptional slew rate of 1900V/µs into a 100Ω load. The ultra-fast settling time of 13ns makes the OPA690 an excellent choice for fast sampling systems such as high-speed ADC drivers, high-speed imaging systems, and current DAC transimpedance amplifier.
The low quiescent current of 6.1mA makes the OPA690 an excellent choice in portable or battery-powered application. System power can be reduced further using the optional disable control pin (DIS). Leaving DIS open, or holding DIS high, operates the OPA690 normally. If DIS is pulled low, the OPA690 supply current drops to less than 100µA while the output goes to a high-impedance state.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | OPA690 Wideband, Voltage-Feedback Operational Amplifier With Disable datasheet (Rev. H) | PDF | HTML | 2024/10/4 | ||
| 白皮書 | High-Speed Voltage-Controlled Current Source (VCCS) for Transient Load Testing and Laser Driver | PDF | HTML | 2026/10/22 | |||
| 應用說明 | Input Voltage Effects on Slew Rate for Voltage and Current Feedback Amplifiers | PDF | HTML | 2025/1/15 | |||
| 電子書 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017/3/28 | |||
| 應用說明 | RLC Filter Design for ADC Interface Applications (Rev. A) | 2015/5/13 | ||||
| 使用指南 | DEM-OPA-SO-1A User's Guide (Rev. B) | 2012/4/12 | ||||
| 使用指南 | DEM-OPA-SOT-1A User's Guide (Rev. B) | 2012/4/12 | ||||
| 應用說明 | A Numerical Solution to an Analog Problem | 2010/4/25 | ||||
| 應用說明 | Noise Analysis for High Speed Op Amps (Rev. A) | 2005/1/17 | ||||
| 應用說明 | ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers | 2004/4/22 | ||||
| 應用說明 | Measuring Board Parasitics in High-Speed Analog Design | 2003/7/7 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DEM-OPA-SO-1A — 適用於 SO-8 封裝的單路運算放大器評估模組
The DEM-OPA-SO-1A demonstration fixture helps designers evaluate the operation and performance of TI's High Speed, Wide Bandwidth Operational Amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.
DEM-OPA-SOT-1A — 適用於 SOT-23 5 針腳和 6 針腳封裝的單路運算放大器評估模組
DEM-OPA-SOT-1A 是一種展示電路板，用於評估高速、寬頻運算放大器的運作和性能。此未組裝的 PC 電路板與採用小型電晶體 (SOT) DBV 封裝的產品相容。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |