Calculation tool
UCC25661X-CALC — UCC25661X Design Calculator
The purpose of this tool is to aid in the design of the main power stage components of a LLC Resonant Converter along with component calculations using UCC25661x controller.
Data sheet
UCC25661
- Full-load switching frequency: 50kHz to 750kHz
- IPPC control enables wide input or wide output LLC (WLLC) operation
- Enhanced light load management:
- High frequency pulse skip for improved light load efficiency
- Audible frequency range skip for reduced audible noise & soft on/off burst mode
- Low frequency burst for low standby power and integrated PFC on/off control
- Internal resonant-capacitor voltage synthesizer for enhanced signal reliability and high start-up frequency support
- Zero current switching (ZCS) avoidance to eliminate capacitive region operation
- Adaptive soft start with minimized inrush current and eliminating reverse recovery at start-up
- Integrated high-voltage start-up
- Integrated gate drive: +0.6/-1.2A
- Complete protections
- 50ns overcurrent protection (OCP), cycle-by-cycle current limit
- Overvoltage protection (OVP), output-voltage latch
- Internal and external overtemperature protection (OTP)
- Input and VCCP UVLO with internal 19V VCCP Clamp
- Independently configured OCP and overload protection
- SOIC-14 package with removed pins for high-voltage clearance
The UCC25661 is a high-frequency LLC controller implementing input-power proportional control (IPPC) scheme, along with enhanced light-load management and multiple protection features.
IPPC widens the control range of the LLC converter and simplifies the design of wide input or output-voltage range applications such as LED drivers, battery chargers. IPPC even work without a PFC for non-universal input applications.
The UCC25661 has enhanced light-load management that improves the efficiency while minimizing audible noise. To minimize standby power, the UCC25661 directly disables the PFC controller when operating in burst mode.
The automatic capacitive region avoidance scheme along with the adaptive soft start with reverse recovery avoidance scheme verifies that the device can never work in a mode where there is a potential to damage the FETs. The automatic capacitive region avoidance scheme makes the controller appropriate for working with a prebiased load.
The UCC25661 comes with robust protection to help you design a reliable power supply. The UCC25661 has options supporting high-voltage start-up, and OVP response. See details in Device Comparison table.
Similar products you might be interested in
Pin-for-pin with same functionality to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 7 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | UCC25661 750kHz Wide VIN /VOUT Range LLC Controller Optimized for Light-Load Efficiency datasheet (Rev. A) | PDF | HTML | 04 Sep 2025 |
| White paper | High Efficiency by Leveraging GaN FET in an LLC Resonant Converter Design | PDF | HTML | 24 Sep 2025 | |
| Product overview | UCC25661(-Q1) Selection Guide | PDF | HTML | 04 Sep 2025 | |
| Technical article | LLC 토폴로지를 이용해 자동차 설계자가 전력 밀도와 안정성을 강화 하도록 지원 | PDF | HTML | 19 May 2025 | |
| Technical article | 幫助汽車設計師藉由 LLC 拓撲結構提升功率密度與系統可靠性 | PDF | HTML | 19 May 2025 | |
| EVM User's guide | UCC25661x Half Bridge LLC Evaluation Module | PDF | HTML | 08 May 2025 | |
| Technical article | Enabling automotive designers to increase power-density and reliability with LLC topology | PDF | HTML | 02 May 2025 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
UCC25661EVM-128 — UCC25661 evaluation module
The UCC25661 evaluation module (EVM) assists designers to evaluate the operation and performance of the UCC25661x LLC Resonant controller (16-pin SOIC package with removed pins for high voltage clearance). This evaluation module demonstrates how UCC25661x controls the LLC resonant half bridge DC-DC (...)
Reference designs
PMP23454 — Universal input, 430W power tool charger reference design
This reference design is a universal input, 430W constant current (CC), constant voltage (CV) charger for power tool applications. The reference design supports output voltage ranges of 0V to 12.5V in trickle-charge mode and 7.5V to 22.5V in fullcharge mode. The power factor correction (PFC) is (...)
Test report: PDF
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOIC (DDB) | 14 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.