Calculation tool
LM5125-CALC — LM5125 quick start calculator
LM5125 quick start calculator helps on design of the power stage, component selection and loop compensation.
Data sheet
LM5125-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: TA = –40°C to +125°C
- Functional Safety-Capable
- Input voltage 4.5V to 42V
- Minimum 2.5V for V(BIAS) ≥ 4.5V or VOUT ≥ 6V
- Output Voltage 6V to 60V
- 2% accuracy, internal feedback resistors
- Bypass operation for VI > VOUT
- Dynamic output voltage tracking
- Digital PWM tracking (DTRK)
- Analog tracking (ATRK)
- Overvoltage protection (64V, 50V, 35V, 28.5V)
- Low shutdown IQ of 2µA
- Low operating IQ of 1.4mA
- Switching frequency from 100kHz to 2.2MHz
- Synchronization to external clock (SYNCIN)
- Dynamically selectable switching modes (FPWM, diode emulation)
- Spread spectrum (DRSS)
- Selectable dead time (14ns to 200ns)
- Current sense resistor or DCR sensing
- Average inductor current monitor
- Average input current limit
- Programmable current limit
- Selectable delay time
- Power-good indicator
- Programmable VI undervoltage lockout (UVLO)
- Lead-less VQFN-32 package with wettable flanks
The LM5125-Q1 is a dual-phase, synchronous, boost controller. The device provides a regulated output voltage for lower or equal input voltage also supporting VI to VOUT bypass mode to save power.
Dynamically program VOUT using the analog or digital ATRK/DTRK function. VI is supported down to 2.5V after start-up as the internal VCC supply is automatically switched from VBIAS to VOUT for VBIAS < 4.5V. The fixed switching frequency is set between 100kHz and 2.2MHz through a resistor on the RT pin or the SYNCIN clock. The switching modes, FPWM, or diode emulation can be changed during operation.
The implemented protections peak current limit, average input current limit, average inductor current monitor, over and undervoltage protection, and the thermal shutdown protect the device and the application.
Technical documentation
No results found. Please clear your search and try again.
View all 2 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LM5125-Q1, Wide-VIN, Dual-Phase, Automotive, Boost Controller With VOUT Tracking datasheet (Rev. B) | PDF | HTML | 15 Apr 2025 |
| Functional safety information | LM5125-Q1, LM51251-Q1 Functional Safety FIT, FMD and Pin FMA | PDF | HTML | 13 Nov 2024 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
LM5125EVM-BST — LM5125 evaluation module
The LM5125EVM-BST showcases the features and performance of the LM5125-Q1 wide input voltage synchronous dual-phase boost controller. This evaluation module is designed for ease of configuration, enabling the user to evaluate different conditions on the module. The standard configuration is (...)
Reference designs
PMP31263 — Dual-phase boost converter reference design for Class-H audio applications
This reference design features a dual-phase automotive boost converter for Class-H audio applications offering analog or digital output voltage tracking. The peak output power of over 800W can be achieved at 11V input voltage.
This test report is based on the LM5125-Q1, which is configured using (...)
Test report: PDF
Reference designs
PMP31306 — GaN-based dual-phase boost converter reference design for Class H audio applications
This design is a dual-phase automotive boost converter for Class-H audio applications using LMG2100R026 gallium nitride (GaN) half bridges and offering analog- or digital-output voltage tracking. The output power is 1000W at 11V input voltage (1250W peak at 12V). The converter area measures 47mm × (...)
Test report: PDF
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.