홈 전력 관리 선형 및 저손실(LDO) 레귤레이터

TLV774-Q1

미리 보기

제품 상세 정보

이 제품에 사용할 수 있는 매개 변수가 없습니다.
  • AEC-Q100 qualified for automotive applications:
    • Ambient temperature: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • High PSRR: 60dB (1kHz), 45dB (1MHz)
  • VIN range: 1.4V to 5.5V
  • Fixed output voltage range: 0.6V to 3.3V
  • Output voltage accuracy: 2%
  • Low dropout voltage:
    • 165mV maximum at 300mA (3.3VOUT)
  • Foldback current limit
  • Active output pulldown resistor
  • Package: 2mm × 2mm, 6-pin WSON (DRV)
  • AEC-Q100 qualified for automotive applications:
    • Ambient temperature: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • High PSRR: 60dB (1kHz), 45dB (1MHz)
  • VIN range: 1.4V to 5.5V
  • Fixed output voltage range: 0.6V to 3.3V
  • Output voltage accuracy: 2%
  • Low dropout voltage:
    • 165mV maximum at 300mA (3.3VOUT)
  • Foldback current limit
  • Active output pulldown resistor
  • Package: 2mm × 2mm, 6-pin WSON (DRV)

The TLV774-Q1 is a small, low-dropout (LDO) linear regulator that sources 300mA of output current. This LDO is designed to provide a voltage source with high PSRR. This device also provides load and line transient performance that meets the requirements of a variety of circuits. With a 1.4V to 5.5V input voltage range and a 0.6V to 3.3V output voltage range, the TLV774-Q1 is flexible enough for use in multiple applications.

The TLV774-Q1 features an internal soft-start circuit to avoid excessive inrush current, therefore minimizing the input voltage drop during start-up. An active pulldown circuit quickly discharges the output when the LDO is disabled and provides a known start-up state. The EN input allows an external logic signal to enable or disable the regulated output. The LDO is stable with small ceramic capacitors, allowing for a small overall package size. The operating junction temperature range is from −40°C to +150°C. This LDO is available in a standard 2mm × 2mm WSON (DRV) package.

The TLV774-Q1 is a small, low-dropout (LDO) linear regulator that sources 300mA of output current. This LDO is designed to provide a voltage source with high PSRR. This device also provides load and line transient performance that meets the requirements of a variety of circuits. With a 1.4V to 5.5V input voltage range and a 0.6V to 3.3V output voltage range, the TLV774-Q1 is flexible enough for use in multiple applications.

The TLV774-Q1 features an internal soft-start circuit to avoid excessive inrush current, therefore minimizing the input voltage drop during start-up. An active pulldown circuit quickly discharges the output when the LDO is disabled and provides a known start-up state. The EN input allows an external logic signal to enable or disable the regulated output. The LDO is stable with small ceramic capacitors, allowing for a small overall package size. The operating junction temperature range is from −40°C to +150°C. This LDO is available in a standard 2mm × 2mm WSON (DRV) package.

이 제품에 사용할 수 있는 세부 정보가 없습니다.
다운로드 스크립트와 함께 비디오 보기 비디오

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상