Inicio Controladores para motores Drivers para motores de CC sin escobillas (BLDC) Controladores BLDC de control integrado
Inicio
Controladores para motores
Drivers para motores de CC sin escobillas (BLDC)
Controladores BLDC de control integrado

MCF8315C-Q1

ACTIVO
Haga su pedido ahora
Hoja de datos

MCF8315C-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Automotive Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Automotive Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
WQFN (RRY) 32 24 mm² (6 mm × 4 mm) VQFN (RGF) 40 35 mm² (7 mm × 5 mm)
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET)
    • 5-point configurable speed profile support
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Configurable motor start-up and stop options
    • Anti-voltage surge (AVS) protection
    • Improved acoustic performance with automatic dead time compensation
    • Variable monitoring through DACOUT pin
  • 4.5 to 35V operating voltage (40V abs max)
  • High (peak) output current capability: 4A
  • Low MOSFET on-state resistance
    • RGF: RDS(ON)(H+L) at TJ = 25°C: 240mΩ (typ.)
    • RRY: RDS(ON)(H+L) at TJ = 25°C: 250mΩ (typ.)
  • Low power sleep mode: refer to
    • 5µA (maximum) at VVM = 24V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Customer-configurable non-volatile memory (EEPROM) to store device configuration
  • Supports up to 60kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3V, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • A suite of integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Supply overvoltage protection (OVP)
    • Motor lock detection (5 different types)
    • Over current protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET)
    • 5-point configurable speed profile support
    • Windmilling support through forward resynchronization and reverse drive
    • Analog, PWM, freq. or I2C based speed input
    • Configurable motor start-up and stop options
    • Anti-voltage surge (AVS) protection
    • Improved acoustic performance with automatic dead time compensation
    • Variable monitoring through DACOUT pin
  • 4.5 to 35V operating voltage (40V abs max)
  • High (peak) output current capability: 4A
  • Low MOSFET on-state resistance
    • RGF: RDS(ON)(H+L) at TJ = 25°C: 240mΩ (typ.)
    • RRY: RDS(ON)(H+L) at TJ = 25°C: 250mΩ (typ.)
  • Low power sleep mode: refer to
    • 5µA (maximum) at VVM = 24V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Customer-configurable non-volatile memory (EEPROM) to store device configuration
  • Supports up to 60kHz PWM frequency for low inductance motor support
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3V, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum and slew rate for EMI mitigation
  • A suite of integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Supply overvoltage protection (OVP)
    • Motor lock detection (5 different types)
    • Over current protection (OCP)
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCF8315C-Q1 provides a single-chip, code-free sensorless FOC design for customers driving speed-controlled 12 to 24V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 4A peak current. The MCF8315C-Q1 integrates three ½-bridges with 40V absolute maximum capability and a low RDS(ON) of 240/250mΩ (high-side + low-side FETs). MCF8315C-Q1 integrates power management circuits including a voltage-adjustable buck regulator (3.3V/5V, 170mA) and LDO (3.3V/20mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate standalone after the device is configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8315C-Q1, intended to protect the device, motor, and system against fault events.

MCF8315C-Q1 is available in two packages: 40-pin 7mm × 5mm wettable-flank QFN (RGF) and 32-pin 6mm × 4mm wettable-flank QFN (RRY).

The MCF8315C-Q1 provides a single-chip, code-free sensorless FOC design for customers driving speed-controlled 12 to 24V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 4A peak current. The MCF8315C-Q1 integrates three ½-bridges with 40V absolute maximum capability and a low RDS(ON) of 240/250mΩ (high-side + low-side FETs). MCF8315C-Q1 integrates power management circuits including a voltage-adjustable buck regulator (3.3V/5V, 170mA) and LDO (3.3V/20mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate standalone after the device is configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8315C-Q1, intended to protect the device, motor, and system against fault events.

MCF8315C-Q1 is available in two packages: 40-pin 7mm × 5mm wettable-flank QFN (RGF) and 32-pin 6mm × 4mm wettable-flank QFN (RRY).
filter Buscar otro/a Controladores BLDC de control integrado
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 9
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos MCF8315C-Q1 Sensorless Field Oriented Control (FOC) Integrated FET BLDC Driver datasheet (Rev. C) PDF | HTML 14/07/2026
Nota sobre la aplicación Getting Started with MOTORSTUDIO (Rev. A) PDF | HTML 9/06/2026
Informe Inside Tomorrow’s SDVs: Integrating Remote-Controlled Edge Nodes PDF | HTML 22/09/2025
Nota sobre la aplicación Develop algorithms and tools based on MSPM0 MCU that supports MCF831x offline burning PDF | HTML 10/06/2025
Nota sobre la aplicación MCF83xx - Open Loop to Closed Loop Handoff Tuning PDF | HTML 15/04/2025
Nota sobre la aplicación How to Program I2C for MCx83xx Device Family PDF | HTML 24/03/2025
Nota sobre la aplicación Motor Pre-Startup Tuning for MCx83xx PDF | HTML 24/03/2025
Nota sobre la aplicación MCF83xx and MCT83xx EEPROM Read and Write Procedure PDF | HTML 13/03/2025
Nota sobre la aplicación PCB Design Guidelines for MCF8316C and MCF8315C PDF | HTML 21/08/2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

MCF8315EVM — EVM MCF8315 para controlador de motor BLDC de 3 fases sin sensor con FOC integrado y MOSFET

El MCF8315 cuenta con controladores de transistor de efecto de campo de semiconductor de óxido metálico (MOSFET) integrado de tres puentes de media H para el control de campo orientado (FOC) sin sensor de un motor de CC sin escobillas (BLDC) trifásico para un accionamiento de corriente máxima de (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
GUI para el módulo de evaluación (EVM)

MOTORSTUDIO-GUI — Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio es una interfaz gráfica de usuario (GUI) fácil de usar que simplifica el proceso de ajuste de nuestros controladores de motor CC sin escobillas (BLDC) para reducir el tiempo de evaluación de dispositivos y desarrollo de productos. La GUI permite a los usuarios accionar rápidamente sus (...)

Productos y hardware compatibles
Herramienta de cálculo

BLDC-MCF831XC-TO-MCF831XD-CONVERSION-CALC — Register Map conversion tool - from MCF831xC to MCF831xD

Excel-based register map converter to automatically convert register contents from MCF831xC to MCF831xD. Input the register map of MCF831xC to generate the converted register map and use the output values directly for the MCF831xD.
Productos y hardware compatibles
Herramienta de cálculo

BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool

Calculates the thermals of a BLDC integrated MOSFET driver based on user input system parameters
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RRY) 32 Ultra Librarian
VQFN (RGF) 40 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos