The XTR111 is a precision voltage-to-current converter designed for the standard 0mA to 20mA or 4mA to 20mA analog signals, and sources up to 32mA. The ratio between input voltage and output current is set by a single resistor, RSET. The circuit can also be modified for voltage-output operation.
An external P-MOSFET transistor provides high output resistance and a broad-compliance voltage range that extends from 2V less than the supply voltage, VVSP, to voltages far less than ground.
The adjustable 3V to 15V subregulator output provides the supply voltage for additional circuitry.
The XTR111 is available in 10-pin HVSSOP and VSON surface-mount packages.
| Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | XTR111 Precision Voltage-to-Current Converter and Transmitter datasheet (Rev. D) | PDF | HTML | Oct 18, 2024 |
| Application note | PLC Analog Output Module Architectures | PDF | HTML | Jan 29, 2025 | |
| Application brief | How to Select Amplifiers for Pressure Transmitter Applications (Rev. B) | PDF | HTML | Feb 14, 2023 | |
| Functional safety information | XTR111 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) | PDF | HTML | Jan 3, 2023 | |
| Analog design Journal | Harnessing wasted energy in 4- to 20-mA current-loop systems | Sep 25, 2012 | ||
| Analog design Journal | 4Q 2012 Issue Analog Applications Journal | Sep 25, 2012 |
For additional terms or required resources, click any title below to view the detail page where available.
The DLP NIRscan is a complete evaluation module (EVM) to design a high performance, affordable near-infrared spectrometer. This flexible tool contains everything a designer needs to start developing a DLP-based spectrometer right out of the box. The EVM features the DLP 0.45 WXGA NIR (...)
The XTR111-2EVM is used for the basic functional evaluation of the XTR111.The XTR111-2EVM is initiallyconfigured to a basic setup for 0 mA to 20 mA operation with a 0-V to 5-Vinput. Note that although the accuracy of the gain setting resistor, RSET, used in the EVM is 0.1%, the XTR111 device has (...)
This reference design helps achieve low-cost, high-speed, small form-factor and high resolution for programmable logic controller (PLC) analog output module designs based on sequentially multiplexed sample and hold buffers.
This single-channel, input-isolated, three-wire current loop transmitter reference design provides a current range of 0 mA to 20 mA while operating on a 24-V supply. The design features a precision digital-to-analog converter (DAC) with an internal reference voltage, integrated three-wire current (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| HVSSOP (DGQ) | 10 | Ultra Librarian |
| VSON (DRC) | 10 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.