Reference design
TIDA-01037
— 20-bit, 1-MSPS Isolator Optimized Data Acquisition Reference Design Maximizing SNR and Sample Rate
TIDA-01037 is a 20-bit, 1 MSPS isolated analog input data acquisition reference design that utilizes two different isolator devices to maximize signal chain SNR and sample rate performance. For signals requiring low jitter, such as ADC sampling clocks, TI’s ISO73xx family of low jitter (...)
Supported products & hardware
Reference design
TIDA-01050
— Optimized Analog Front End DAQ System Reference Design for 18 bit SAR Data Converters
The TIDA-01050 reference design aims to improve the integration, power consumption, performance, and clocking issues typically associated with automatic test equipment. This design is applicable to any ATE system but most applicable to systems requiring a large number of input channels.
Supported products & hardware
Reference design
TIDA-01051
— Reference Design Optimizing FPGA Utilization and Data Throughput for Automatic Test Equipment
The TIDA-01051 reference design is used to demonstrate optimized channel density, integration, power consumption, clock distribution and signal chain performance of very high channel count data acquisition (DAQ) systems such as those used in automatic test equipment (ATE). Using serializers, such (...)
Supported products & hardware
Reference design
TIDA-01052
— ADC Driver Reference Design Improving Full Scale THD Using Negative Supply
The TIDA-01052 reference design aims to highlight system performance increases seen using a negative voltage rail on the analog front end driver amplifiers rather than ground. This concept is relative to all analog front ends, however this design is aimed specifically at automatic test equipment.
Supported products & hardware
Reference design
TIDA-01054
— Multi-Rail Power Reference Design for Eliminating EMI Effects in High Performance DAQ Systems
The TIDA-01054 reference design helps eliminate the performance degrading effects of EMI on Data Acquisition (DAQ) systems greater than 16 bits with the help of the LM53635 buck converter. The buck converter enables the designer to place power solutions close to the signal path without the (...)
Supported products & hardware
Reference design
TIDA-01055
— ADC Voltage Reference Buffer Optimization Reference Design for High Performance DAQ Systems
The TIDA-01055 reference design for high performance DAQ Systems optimizes the ADC reference buffer to improve SNR performance and reduce power consumption with the TI OPA837 high-speed op amp. This device is used in a composite buffer configuration and provides a 22% power improvement over (...)
Supported products & hardware
Reference design
TIDA-01056
— 20-bit 1MSPS DAQ Reference Design Optimizing Power Supply Efficiency While Minimizing EMI
This reference design for high performance data acquisition (DAQ) systems optimizes power stage in order to reduce power consumption and minimize the effect of EMI from switching regulator by using LMS3635-Q1 buck converter. This reference designs yields 7.2% efficiency improvement at most (...)
Supported products & hardware
Reference design
TIDA-01057
— Reference Design Maximizing Signal Dynamic Range for True 10 Vpp Differential Input to 20 bit ADC
This reference design is designed for high performance data acquisition(DAQ) systems to improve the dynamic range of 20 bit differential input ADCs. Many DAQ systems require the measurement capability at a wide FSR (Full Scale Range) in order to obtain sufficient signal dynamic range. Many earlier (...)
Supported products & hardware
Reference design
TIDA-01434
— Isolated, Transformerless, Bipolar Supply for 24-Bit ADCs Reference Design
This isolated, 3.65-mm thin reference design enables highly-integrated, bipolar input and high-performance solutions with a 24-bit delta-sigma analog-to-digital converter (ADC). Modern analog input modules need high performance in different aspects such as higher channel density at the same room (...)
Supported products & hardware