ホーム パワー マネージメント LED ドライバ 車載 LED ドライバ

TPS92541-Q1

アクティブ

車載、65V 同期整流昇圧コントローラと、CC/CV (定電流と定電圧) の 2A シングルチャネル同期整流降圧コンバータ

製品詳細

Number of channels 1 Topology Boost Controller, Buck Controller Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 65 Vout (min) (V) 1 Vout (max) (V) 65 Iout (max) (A) 2 Iq (typ) (mA) 2000 Switching frequency (max) (kHz) 1000 Features Fault Detection, LED Open Detection, LED Short Detection, Precise dimming control, Thermal Error Flag, Thermal shutdown
Number of channels 1 Topology Boost Controller, Buck Controller Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 65 Vout (min) (V) 1 Vout (max) (V) 65 Iout (max) (A) 2 Iq (typ) (mA) 2000 Switching frequency (max) (kHz) 1000 Features Fault Detection, LED Open Detection, LED Short Detection, Precise dimming control, Thermal Error Flag, Thermal shutdown
HTQFP (PKD) 48 81 mm² 9 x 9
  • AEC-Q100 qualified for automotive applications
    • Grade 1: –40°C to 125°C ambient operating temperature
    • Device HBM classification level H1C
    • Device CDM classification level C5
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • 4.5V to 65V wide input voltage range
  • Synchronous Buck with integrated switches
  • Configurable Constant Voltage (CV) and Constant Current (CC) operation
    • Up to 2A continuous output current with 4% accuracy
    • 4% regulation accuracy (voltage and current mode)
  • Synchronous BOOST controller
    • Programmable output voltage up to 65V
  • BOOST and BUCK spread-spectrum for EMI mitigation
  • BUCK switch thermal protection
  • UART serial communication
    • Internal oscillator for system clock
    • LMM compatible
  • Internal EEPROM
    • Default settings
    • Customer calibration data
  • AEC-Q100 qualified for automotive applications
    • Grade 1: –40°C to 125°C ambient operating temperature
    • Device HBM classification level H1C
    • Device CDM classification level C5
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • 4.5V to 65V wide input voltage range
  • Synchronous Buck with integrated switches
  • Configurable Constant Voltage (CV) and Constant Current (CC) operation
    • Up to 2A continuous output current with 4% accuracy
    • 4% regulation accuracy (voltage and current mode)
  • Synchronous BOOST controller
    • Programmable output voltage up to 65V
  • BOOST and BUCK spread-spectrum for EMI mitigation
  • BUCK switch thermal protection
  • UART serial communication
    • Internal oscillator for system clock
    • LMM compatible
  • Internal EEPROM
    • Default settings
    • Customer calibration data

The TPS92541-Q1 device contains a synchronous BOOST controller and a monolithic synchronous buck LED driver with a wide 4.5V to 65V operating BUCK input voltage range.

The synchronous BOOST controller implements a peak current-mode controller to operate in constant voltage mode. The Boost can be programmed to operate as dual-phase, or three-phase together with other TPS92541-Q1 devices. The output voltage can be programmed using a programmable 8-bit DAC. The BOOST controller incorporates programmable frequency modulation technique for EMI reduction.

The monolithic synchronous BUCK implements an adaptive on-time average current mode control and is designed to generate constant voltage (CV) or constant current (CC) output. In the CC mode, the BUCK is compatible with shunt FET dimming techniques and LED matrix manager-based dynamic beam headlamps. In CV mode, the adaptive on-time control enables high bandwidth operation with fast transient response. The adaptive on-time control provides near constant switching frequency that can be set between 100kHz and 1.0MHz. Inductor current sensing and closed-loop feedback enable better than ±4% accuracy over wide input voltage, output voltage and ambient temperature range. In CC mode, the BUCK can independently modulate LED current using both analog or PWM dimming techniques.

The TPS92541-Q1 includes an internal oscillator. The UART serial interface is compatible with TPS9266x, and TPS9254x devices. The internal EEPROM can store system defaults as well as calibration and lighting module data. The seven configurable MPIOs and DIOs can be set as digital inputs or outputs, or ADC inputs for applications with system temperature compensation, LED binning and coding, etc.

The TPS92541-Q1 is available in a 7.0mm × 7.0mm thermally-enhanced 48-pin HTQFP package.

The TPS92541-Q1 device contains a synchronous BOOST controller and a monolithic synchronous buck LED driver with a wide 4.5V to 65V operating BUCK input voltage range.

The synchronous BOOST controller implements a peak current-mode controller to operate in constant voltage mode. The Boost can be programmed to operate as dual-phase, or three-phase together with other TPS92541-Q1 devices. The output voltage can be programmed using a programmable 8-bit DAC. The BOOST controller incorporates programmable frequency modulation technique for EMI reduction.

The monolithic synchronous BUCK implements an adaptive on-time average current mode control and is designed to generate constant voltage (CV) or constant current (CC) output. In the CC mode, the BUCK is compatible with shunt FET dimming techniques and LED matrix manager-based dynamic beam headlamps. In CV mode, the adaptive on-time control enables high bandwidth operation with fast transient response. The adaptive on-time control provides near constant switching frequency that can be set between 100kHz and 1.0MHz. Inductor current sensing and closed-loop feedback enable better than ±4% accuracy over wide input voltage, output voltage and ambient temperature range. In CC mode, the BUCK can independently modulate LED current using both analog or PWM dimming techniques.

The TPS92541-Q1 includes an internal oscillator. The UART serial interface is compatible with TPS9266x, and TPS9254x devices. The internal EEPROM can store system defaults as well as calibration and lighting module data. The seven configurable MPIOs and DIOs can be set as digital inputs or outputs, or ADC inputs for applications with system temperature compensation, LED binning and coding, etc.

The TPS92541-Q1 is available in a 7.0mm × 7.0mm thermally-enhanced 48-pin HTQFP package.

ダウンロード 字幕付きのビデオを表示 ビデオ

詳細リクエスト

詳細なデータシートとその他の情報が入手可能です。ご注文

機能安全マニュアル、レポート、分析レポート、定量分析レポートが入手可能です。NDA (秘密保持契約) が必要です。ご注文

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS92541-Q1 65V Automotive Synchronous Boost Controller, and 2A Synchronous CC/CV Buck Converter データシート (Rev. A) PDF | HTML 2025年 10月 9日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LEDMCUEVM-132 — LED 評価基板向け MSP432E401Y MCU 通信ボード

LEDMCUEVM-132 が実装しているのは、バス上で複数のデバイスをサポートする SPI 通信機能、LMM デバイス ファミリ向けの UART 通信機能、LMM デバイス ファミリを制御するための UART に対応する CAN トランシーバ、調光目的の 4 つの PWM 信号、複数の IO、絶縁型 5V 電源、デジタル アイソレータ、トランシーバを取り付けた 1 本の標準的な CAN バスです。

ユーザー ガイド: PDF | HTML
評価ボード

TPS92541EVM — TPS92541-Q1 評価基板

TPS92543-Q1 および TPS92541-Q1 デバイスは、定電圧 (CV) モードのピーク電流モード コントローラを備えた同期 BOOST コントローラと、適応型オン時間平均電流モード制御を備えたモノリシック同期降圧 LED ドライバを実装しています。TPS92541-Q1 は、定電流モードでは、シャント FET 調光手法や、LED マトリクス マネージャを使用したダイナミック ビーム ヘッドライトと互換性があるように設計されていります。適応型オン時間制御により、100kHz~1MHz (...)
ドライバまたはライブラリ

TPS9254X-DESIGN-RESOURCES TPS9254x design resources

TPS9254x Design Resources
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
車載 LED ドライバ
TPS92541-Q1 車載、65V 同期整流昇圧コントローラと、CC/CV (定電流と定電圧) の 2A シングルチャネル同期整流降圧コンバータ TPS92542-Q1 車載、65V 同期整流昇圧コントローラと、2 チャネルの CC/CV (定電流と定電圧) 2A 同期整流降圧コンバータ TPS92543-Q1 車載、65V、同期整流昇圧コントローラと、CC (定電流) の 2A 同期整流降圧コントローラと、バイパス FET コントローラ TPS92544-Q1 車載、65V、同期整流昇圧コントローラ、2A 同期整流降圧 CC とステッピング モーター台形波モーション制御
ドライバまたはライブラリ

TPS9254X-FS-NDA TPS9254x functional safety documentation - NDA restrictions

TPS9254x functional safety documentation - NDA restrictions
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
車載 LED ドライバ
TPS92541-Q1 車載、65V 同期整流昇圧コントローラと、CC/CV (定電流と定電圧) の 2A シングルチャネル同期整流降圧コンバータ TPS92542-Q1 車載、65V 同期整流昇圧コントローラと、2 チャネルの CC/CV (定電流と定電圧) 2A 同期整流降圧コンバータ TPS92543-Q1 車載、65V、同期整流昇圧コントローラと、CC (定電流) の 2A 同期整流降圧コントローラと、バイパス FET コントローラ TPS92544-Q1 車載、65V、同期整流昇圧コントローラ、2A 同期整流降圧 CC とステッピング モーター台形波モーション制御
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI を使用すると、内蔵のライブラリを使用して、複雑なミックスド (...)
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
HTQFP (PKD) 48 Ultra Librarian

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ