TLC0831

アクティブ

シリアル出力、マイクロプロセッサのペリフェラルまたはスタンドアロンでの運用に対応、シングルチャネル、8 ビット、31kSPS ADC

ご注文はこちら

データシート

document-pdfAcrobat 8-Bit Analog-to-Digital Converters With Serial Control データシート (Rev. B) (英語)

TLC0831

アクティブ

データシート

ご注文はこちら

製品詳細

Resolution (Bits)

8

Sample rate (max) (ksps)

31

Number of input channels

1

Interface type

SPI

Architecture

SAR

Input type

Differential, Single-ended

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

3

Analog supply voltage (min) (V)

4.5

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

4.5

Digital supply (max) (V)

5.5

Resolution (Bits)

8

Sample rate (max) (ksps)

31

Number of input channels

1

Interface type

SPI

Architecture

SAR

Input type

Differential, Single-ended

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

3

Analog supply voltage (min) (V)

4.5

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

4.5

Digital supply (max) (V)

5.5

PDIP (P)

8

92.5083 mm² 9.81 x 9.43

SOIC (D)

8

29.4 mm² 4.9 x 6

8-Bit Resolution
Easy Microprocessor Interface or Standalone Operation
Operates Ratiometrically or With 5-V Reference
Single Channel or Multiplexed Twin Channels With Single-Ended or Differential Input Options
Input Range 0 to 5 V With Single 5-V Supply
Inputs and Outputs Are Compatible With TTL and MOS
Conversion Time of 32 us at f_clock = 250 kHz
Designed to Be Interchangeable With National Semiconductor ADC0831 and ADC0832
Total Unadjusted Error . . . ± 1 LSB

8-Bit Resolution
Easy Microprocessor Interface or Standalone Operation
Operates Ratiometrically or With 5-V Reference
Single Channel or Multiplexed Twin Channels With Single-Ended or Differential Input Options
Input Range 0 to 5 V With Single 5-V Supply
Inputs and Outputs Are Compatible With TTL and MOS
Conversion Time of 32 us at f_clock = 250 kHz
Designed to Be Interchangeable With National Semiconductor ADC0831 and ADC0832
Total Unadjusted Error . . . ± 1 LSB

These devices are 8-bit successive-approximation analog-to-digital converters. The TLC0831 has single input channels; the TLC0832 has multiplexed twin input channels. The serial output is configured to interface with standard shift registers or microprocessors.

The TLC0832 multiplexer is software configured for single-ended or differential inputs. The differential analog voltage input allows for common-mode rejection or offset of the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.

The operation of the TLC0831 and TLC0832 devices is very similar to the more complex TLC0834 and TLC0838 devices. Ratiometric conversion can be attained by setting the REF input equal to the maximum analog input signal value, which gives the highest possible conversion resolution. Typically, REF is set equal to V_CC (done internally on the TLC0832).

The TLC0831C and TLC0832C are characterized for operation from 0°C to 70°C. The TLC0831I and TLC0832I are characterized for operation from -40°C to 85°C.

These devices are 8-bit successive-approximation analog-to-digital converters. The TLC0831 has single input channels; the TLC0832 has multiplexed twin input channels. The serial output is configured to interface with standard shift registers or microprocessors.

The TLC0832 multiplexer is software configured for single-ended or differential inputs. The differential analog voltage input allows for common-mode rejection or offset of the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.

The operation of the TLC0831 and TLC0832 devices is very similar to the more complex TLC0834 and TLC0838 devices. Ratiometric conversion can be attained by setting the REF input equal to the maximum analog input signal value, which gives the highest possible conversion resolution. Typically, REF is set equal to V_CC (done internally on the TLC0832).

The TLC0831C and TLC0832C are characterized for operation from 0°C to 70°C. The TLC0831I and TLC0832I are characterized for operation from -40°C to 85°C.

filter

その他の高精度 ADC を検索

ダウンロード