モノリシック・フォトダイオードと単一電源トランスインピーダンス・アンプ

製品詳細

Rating Catalog Operating temperature range (°C) 0 to 70 Applications Enterprise
Rating Catalog Operating temperature range (°C) 0 to 70 Applications Enterprise
PDIP (NTC) 8 89.535 mm² 9.525 x 9.4 SOP (DTL) 8 100.3935 mm² 9.525 x 10.54
  • Single Supply: 2.7 to 36 V
  • Photodiode Size: 0.090 inch × 0.090 inch
    (2.29 mm × 2.29 mm)
  • Internal 1-MΩ Feedback Resistor
  • High Responsivity: 0.45 A/W (650 nm)
  • Bandwidth: 14 kHz at RF = 1 MΩ
  • Packages: Clear Plastic 8-pin PDIP and J-Lead
    SOP
  • Single Supply: 2.7 to 36 V
  • Photodiode Size: 0.090 inch × 0.090 inch
    (2.29 mm × 2.29 mm)
  • Internal 1-MΩ Feedback Resistor
  • High Responsivity: 0.45 A/W (650 nm)
  • Bandwidth: 14 kHz at RF = 1 MΩ
  • Packages: Clear Plastic 8-pin PDIP and J-Lead
    SOP

The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier. The integrated combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered in discrete designs, such as leakage current errors, noise pick-up, and gain peaking as a result of stray capacitance. Output voltage increases linearly with light intensity. The amplifier is designed for single or dual power-supply operation.

The 0.09 inch × 0.09 inch (2.29 mm × 2.29 mm) photodiode operates in the photoconductive mode for excellent linearity and low dark current.

The OPT101 operates from 2.7 V to 36 V supplies and quiescent current is only 120 µA. This device is available in clear plastic 8-pin PDIP, and J-lead SOP for surface mounting. The temperature range is 0°C to 70°C.

The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier. The integrated combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered in discrete designs, such as leakage current errors, noise pick-up, and gain peaking as a result of stray capacitance. Output voltage increases linearly with light intensity. The amplifier is designed for single or dual power-supply operation.

The 0.09 inch × 0.09 inch (2.29 mm × 2.29 mm) photodiode operates in the photoconductive mode for excellent linearity and low dark current.

The OPT101 operates from 2.7 V to 36 V supplies and quiescent current is only 120 µA. This device is available in clear plastic 8-pin PDIP, and J-lead SOP for surface mounting. The temperature range is 0°C to 70°C.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート OPT101 Monolithic Photodiode and Single-Supply Transimpedance Amplifier データシート (Rev. B) PDF | HTML 2015年 3月 13日
EVM ユーザー ガイド (英語) LIGHTSOURCE01EVM Light Source EVM User's Guide (Rev. A) PDF | HTML 2024年 11月 20日
アプリケーション・ノート Tame Photodiodes with Op Amp Bootstrap 2000年 10月 4日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

開発キット

LIGHTSOURCE01EVM — TI の周辺光センサ評価基基板のキャリブレーション用の安定した光源

LIGHTSOURCE01EVM は、周囲光センサ (ALS) やカラー センサのキャリブレーションに使用する、安定した均一な光源です。この光源は、TI の光センサを搭載した最終製品のキャリブレーションとテストを実施する生産環境で使用することを意図して設計されています。この安定化光源を使用して、日没 (4200K CCT) および正午 (6400K CCT) の照明モードをシミュレートできます。光源は均一かつ一定であり、時間の経過に伴う光出力の変動は ±1% 未満、直径 1 インチの領域における均一性の変動も ±1% 未満です。照度レベルとモードは、光源の評価基板の GUI (...)

ユーザー ガイド: PDF | HTML
シミュレーション・モデル

OPT101 PSpice Model

SBOM123.ZIP (3 KB) - PSpice Model
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
PDIP (NTC) 8 Ultra Librarian
SOP (DTL) 8 Ultra Librarian

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ