主页 电源管理 电源开关 高侧开关

TPS2HCS08-Q1

正在供货

Automotive, dual-channel 8mΩ smart high-side switch with I2T wire protection, low IQ mode and SPI

产品详情

Number of channels 2 Operating voltage (max) (V) 18 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 8 Imax (A) 13 Current limit type Adjustable FET Internal Features Current sense output, Current sense/monitor, Low power, Programmable current limit, SPI, Thermal shutdown, Undervoltage Lock Out (UVLO) Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
Number of channels 2 Operating voltage (max) (V) 18 Operating voltage (min) (V) 6 Ron (typ) (mΩ) 8 Imax (A) 13 Current limit type Adjustable FET Internal Features Current sense output, Current sense/monitor, Low power, Programmable current limit, SPI, Thermal shutdown, Undervoltage Lock Out (UVLO) Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to 125°C
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C5
    • Withstands 36V load dump
  • Dual-channel SPI controlled smart high-side switch with integrated nFETs.
  • Integrated wire-harness protection without MCU involvement and a SPI programmable fuse curve
    • Protection against persistent overload condition
  • Improve system level reliability through SPI programmable adjustable overcurrent protection
  • SPI configurable capacitive charging mode to drive a wide range of capacitive input ECUs load current needs.
  • Low quiescent current, low power ON-state to supply always-ON loads with automatic wake on load current increase with wake signal to MCU
  • Robust integrated output protection:
    • Integrated thermal protection
    • Protection against short-to-ground
    • Protection against reverse battery events including automatic switch on of FET with reverse supply voltage
    • Automatic shut off on loss of battery and ground
    • Integrated output clamp to demagnetize inductive loads
  • Digital sense output via SPI can be configured to measure:
    • Load current accurately with integrated ADC
    • Output or supply voltage, FET temperature
  • Provides full fault diagnostics through SPI interface and indication through FLT pin
    • Detection of open load and short-to-battery
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to 125°C
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C5
    • Withstands 36V load dump
  • Dual-channel SPI controlled smart high-side switch with integrated nFETs.
  • Integrated wire-harness protection without MCU involvement and a SPI programmable fuse curve
    • Protection against persistent overload condition
  • Improve system level reliability through SPI programmable adjustable overcurrent protection
  • SPI configurable capacitive charging mode to drive a wide range of capacitive input ECUs load current needs.
  • Low quiescent current, low power ON-state to supply always-ON loads with automatic wake on load current increase with wake signal to MCU
  • Robust integrated output protection:
    • Integrated thermal protection
    • Protection against short-to-ground
    • Protection against reverse battery events including automatic switch on of FET with reverse supply voltage
    • Automatic shut off on loss of battery and ground
    • Integrated output clamp to demagnetize inductive loads
  • Digital sense output via SPI can be configured to measure:
    • Load current accurately with integrated ADC
    • Output or supply voltage, FET temperature
  • Provides full fault diagnostics through SPI interface and indication through FLT pin
    • Detection of open load and short-to-battery

The TPS2HCS08-Q1 device is a dual channel, smart high-side switch controlled through a serial peripheral interface (SPI) and is intended for power distribution and actuator drive applications. The device integrates robust protection to ensure output wire and load protection against short circuit or overload conditions. The device features overcurrent protection configurable via SPI with sufficient flexibility to support loads that require large inrush currents and provide improved protection. The device also integrates a programmable fuse profile (current versus time) that turns off the switch under persistent overload condition. The two features together allow optimization of the wire harness for any load profile with full protection.

The device supports a SPI-configurable capacitive charging mode for ECU loads in power distribution switch applications. The device also includes two low power mode (LPM) states, an auto entry mode or a manual entry mode, that enables the device to provide current to the load ECU while only consuming about 10–20µA of current.

The TPS2HCS08-Q1 device also provides a high accuracy digital current sense over SPI that allows for improved load diagnostics. By reporting load current and the channel output voltage and output FET temperature to a system MCU, the device enables diagnosis of switch and load failures.

The TPS2HCS08-Q1 is available in a HTSSOP package which allows for reduced PCB footprint.

The TPS2HCS08-Q1 device is a dual channel, smart high-side switch controlled through a serial peripheral interface (SPI) and is intended for power distribution and actuator drive applications. The device integrates robust protection to ensure output wire and load protection against short circuit or overload conditions. The device features overcurrent protection configurable via SPI with sufficient flexibility to support loads that require large inrush currents and provide improved protection. The device also integrates a programmable fuse profile (current versus time) that turns off the switch under persistent overload condition. The two features together allow optimization of the wire harness for any load profile with full protection.

The device supports a SPI-configurable capacitive charging mode for ECU loads in power distribution switch applications. The device also includes two low power mode (LPM) states, an auto entry mode or a manual entry mode, that enables the device to provide current to the load ECU while only consuming about 10–20µA of current.

The TPS2HCS08-Q1 device also provides a high accuracy digital current sense over SPI that allows for improved load diagnostics. By reporting load current and the channel output voltage and output FET temperature to a system MCU, the device enables diagnosis of switch and load failures.

The TPS2HCS08-Q1 is available in a HTSSOP package which allows for reduced PCB footprint.

下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 5
类型 标题 下载最新的英语版本 日期
* 数据表 TPS2HCS08-Q1 8.9mΩ , Automotive Dual-Channel , SPI Controlled High-Side Switch With Integrated I2T Wire Protection and Low Power Mode 数据表 PDF | HTML 2025年 5月 15日
白皮书 軟體定義車輛將汽車電子的未來推入正軌 (Rev. B) PDF | HTML 2025年 1月 29日
白皮书 차량용 전자장치의 미래를 바꾸는 소프트웨어 정의 차량 (Rev. B) PDF | HTML 2025年 1月 29日
技术文章 eFuse 如何協助推動軟體定義車輛的區域架構革命 PDF | HTML 2024年 5月 17日
技术文章 eFuse가 소프트웨어 정의 차량의 영역 아키텍처 혁신을 이끄는 방법 PDF | HTML 2024年 5月 16日

设计和开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

HSS-HCMOTHERBRDEVM — 智能保险丝评估模块

HSS-HCMOTHERBRDEVM 和相应的子卡(例如 HSS-2HCS10EVM)用于展示和评估德州仪器 (TI) 智能保险丝高侧开关产品系列的所有功能。主板旨在与多个不同子卡一起使用,从而可以将单个主机 EVM 用于具有不同导通电阻和功能的各种不同高侧开关。

用户指南: PDF | HTML
英语版 (Rev.C): PDF | HTML
TI.com 上无现货
子卡

HSS-HCS-BLANKEVM — 适用于智能保险丝开关产品系列的空载评估模块

HSS-HCS-BLANKEVM 是设计用于与 HSS-HCMOTHERBRDEVM 配合使用的子卡。此子卡展示了我们的智能保险丝产品系列的功能。
用户指南: PDF | HTML
英语版 (Rev.C): PDF | HTML
TI.com 上无现货
驱动程序或库

HCS-SMARTFUSE-DRIVERS Simple C drivers and code examples for HCS smart fuse devices

Simple C drivers and code examples for HCS smart fuse devices
支持的产品和硬件

支持的产品和硬件

产品
高侧开关
TPS2HCS08-Q1 Automotive, dual-channel 8mΩ smart high-side switch with I2T wire protection, low IQ mode and SPI TPS2HCS10-Q1 具有 I²T 线保护、低 IQ 模式和 SPI 的汽车级双通道 10mΩ 智能高侧开关
硬件开发
评估板
HSS-2HCS10EVM TPS2HCS10-Q1 智能保险丝高侧开关子卡 HSS-HCMOTHERBRDEVM 智能保险丝评估模块
支持软件

HCS-HEADER-FILES C Header files for smart fuse high-side switches with register definitions

C header files for smart-fuse high-side switches with register definitions
支持的产品和硬件

支持的产品和硬件

产品
高侧开关
TPS2HCS10-Q1 具有 I²T 线保护、低 IQ 模式和 SPI 的汽车级双通道 10mΩ 智能高侧开关 TPS2HCS08-Q1 Automotive, dual-channel 8mΩ smart high-side switch with I2T wire protection, low IQ mode and SPI
硬件开发
评估板
HSS-2HCS10EVM TPS2HCS10-Q1 智能保险丝高侧开关子卡 HSS-HCMOTHERBRDEVM 智能保险丝评估模块
子卡
HSS-HCS-BLANKEVM 适用于智能保险丝开关产品系列的空载评估模块
模拟工具

PSPICE-FOR-TI — PSpice® for TI 设计和仿真工具

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
参考设计

TIDA-020079 — 区域参考设计

该参考设计演示了下一代区域控制模块的主要功能,包括配电、负载驱动和车载网络。该设计的亮点包括功能安全合规型 PMIC 和微控制器 (MCU) 设计、具有理想二极管控制器的冗余电源管理以及用于安全配电的智能电子保险丝。该设计还具有区域控制模块中预期的各种负载驱动选项,例如高侧驱动器、电机驱动器、可配置驱动器和 D 类音频放大器。该区域参考设计展示了各种通信协议(如以太网、CAN 和 LIN),并支持汽车网络技术(例如以太网 AVB、10BASE-T1S 和 CAN FD Light)的新兴趋势。
设计指南: PDF
封装 引脚 CAD 符号、封装和 3D 模型
HTSSOP (PWP) 16 Ultra Librarian

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频