The SN74CBTLV1G125 features a single high-speed line switch. The switch is disabled when the output-enable (OE) input is high.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
| Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | SN74CBTLV1G125-Q1 low-voltage single FET bus switch datasheet (Rev. B) | PDF | HTML | Jan 24, 2019 |
| Application note | Selecting the Correct Texas Instruments Signal Switch (Rev. E) | PDF | HTML | Jun 2, 2022 | |
| Application note | Multiplexers and Signal Switches Glossary (Rev. B) | PDF | HTML | Dec 1, 2021 | |
| Application brief | Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C) | PDF | HTML | Jan 6, 2021 |
For additional terms or required resources, click any title below to view the detail page where available.
Speed up your op amp prototyping and testing with the DIP adapter evaluation module (DIP-ADAPTER-EVM), which provides a fast, easy and inexpensive way to interface with small surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.