The AFE031 is a low-cost, integrated, powerline communications (PLC) analog front-end (AFE) device that is capable of capacitive- or transformer-coupled connections to the powerline while under the control of a DSP or microcontroller. It is ideal for driving low-impedance lines that require up to 1.5 A into reactive loads. The integrated receiver is able to detect signals down to 20 µVRMS and is capable of a wide range of gain options to adapt to varying input signal conditions. This monolithic integrated circuit provides high reliability in demanding powerline communications applications.
The AFE031 transmit power amplifier operates from a single supply in the range of 7 V to 24 V. At maximum output current, a wide output swing provides a 12-VPP (IOUT = 1.5 A) capability with a nominal 15-V supply. The analog and digital signal processing circuitry operates from a single 3.3-V power supply.
The AFE031 is internally protected against overtemperature and short-circuit conditions. It also provides an adjustable current limit. An interrupt output is provided that indicates both current limit and thermal limit. There is also a shutdown pin that can be used to quickly put the device into its lowest power state. Through the four-wire serial peripheral interface, or SPI™, each functional block can be enabled or disabled to optimize power dissipation.
The AFE031 is housed in a thermally-enhanced, surface-mount PowerPAD package (QFN-48). Operation is specified over the extended industrial junction temperature range of –40°C to +125°C.
| Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | AFE031 Powerline Communications Analog Front-End datasheet (Rev. E) | PDF | HTML | Jun 17, 2019 |
| Application brief | Power Line Communication in Solar Applications | PDF | HTML | Dec 12, 2024 | |
| Application note | Interfacing the C2000 with an AFE03x: B-FSK Example (Rev. D) | PDF | HTML | Feb 15, 2022 | |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | Mar 28, 2017 | |
| E-book | Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. D) | PDF | HTML | Sep 30, 2014 | |
| User guide | TINA Simulation Schematic of a Two-Node, Power-Line Communication System | Sep 6, 2013 | ||
| More literature | Efficiency from Metering to Service Solutions | Oct 17, 2012 | ||
| Application note | AFE Design for a Narrowband Power-Line Communications Modem Using the AFE031 (Rev. A) | Nov 3, 2011 |
For additional terms or required resources, click any title below to view the detail page where available.
PRIME standard for narrowband OFDM Power Line Communications. The data concentrator solution is designed for the head-end systems which communicate with the end meters (“service node”) in the neighborhood area network.
The TI PRIME data concentrator system relies on the AM3356 ARM Cortex-A8 (...)
This reference design is a solar power optimizer, which can support up to 80V input voltage and 80V output voltage, providing up to 18A output and input current. The design uses a configurable four-switch buck-boost converter to step up or step down the panel current to the string current. The (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.