The TPSF12C1 is an active filter IC designed to reduce common-mode (CM) electromagnetic interference (EMI) in single-phase AC power systems.
The active EMI filter (AEF) configured with voltage sense and current inject (VSCI) uses a capacitive multiplier circuit to emulate the Y-capacitors in a conventional passive filter design. The device senses the high-frequency noise on each power line using a set of sense capacitors and injects noise-canceling currents back into the power lines using an injection capacitor. The effective active capacitance is set by the circuit gain and the injection capacitance. The AEF sensing and injection impedances use relatively low capacitance values with small component footprints. The device includes integrated filtering, compensation and protection circuitry, and an enable input.
The TPSF12C1 provides a very low impedance path for CM noise in the frequency range of interest for EMI measurement. Enabling up to 30 dB of CM noise reduction at the lower end of specified frequency ranges (for example, 150 kHz to 3 MHz) significantly reduces the size, weight and cost of the CM filter implementation.
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | TPSF12C1 同相ノイズ低減向け、スタンドアロン、アクティブ EMI フィルタ データシート (Rev. A) | 2023年 4月 28日 | |||
| 証明書 | TPSF12C1EVM-FILTER EU Declaration of Conformity (DoC) | 2023年 5月 18日 | ||||
| ホワイト・ペーパー | アクティブEMI電源フィルタICを使用して同相放射を低減する方法 | PDF | HTML | 英語版 | PDF | HTML | 2023年 2月 14日 | |
| ホワイト・ペーパー | 主動 EMI 濾波器 IC 如何降低單相和三相電源系統中的共模輻射，並提升功率密度 | PDF | HTML | 2023年 2月 14日 | |||
| ホワイト・ペーパー | 액티브 EMI 필터 IC가 단상 및 3상 전원 시스템에서 공통 모드 방출을 완화하고 전력 밀도를 높이는 방법 | PDF | HTML | 2023年 2月 14日 | |||
| 機能安全情報 | TPSF12C1 Functional Safety FIT Rate, FMD, and Pin FMA | PDF | HTML | 2022年 11月 11日 | |||
| 証明書 | TPSF12C1QEVM EU RoHS Declaration of Conformity (DoC) | 2022年 11月 1日 |
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
Welcome to the TPSF12C1/-Q1 and TPSF12C3/-Q1 quickstart design tool. This standalone tool facilitates and assists the power-supply engineer with the design of an AEF circuit based on this family of common-mode AEF ICs. As such, the user can expeditiously arrive at an optimized design to meet (...)
This Mathcad file is offered to predict the stability of a voltage-sense current-inject AEF circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of common-mode (CM) AEF ICs, and to assist with component selection. The model is inclusive of most parasitic effects and can be used as a (...)
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| SOT-23-THN (DYY) | 14 | Ultra Librarian |
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。
Welcome to the TPSF12C1/-Q1 and TPSF12C3/-Q1 quickstart design tool. This standalone tool facilitates and assists the power supply engineer with the design of an active EMI filter (AEF) circuit based on this family of common-mode AEF ICs. As such, the user can expeditiously arrive at an optimized design to meet the application requirements.
TPSF12C1/3 mathcad file
This Mathcad worksheet is offered to predict the stability of a voltage-sense, current-inject active EMI filter (AEF) circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of AEF ICs, and to assist with component selection. The model is inclusive of most parasitc effects and can be used as a quick check of the loop gain and insertion loss prior to simulation, bench measurement and fine tuning.
The worksheet functions for single- and 3-phase AC systems and facilitates two ways of entering the CM choke parameters:
1. Using an equivalent circuit model with (a) resistive and capacitive parasitics – suitable for ferrite-core chokes; (b) a ladder network of three parallel RL circuits -- suitable for nanocrystalline chokes
2. Using measured impedance data (magnitude and phase).
The worksheet is ideal for knowledge capture, unit-aware calculation reuse and for engineering collaboration amongst design, systems & application engineers.