AFE7958

アクティブ

複数の 12GSPS DAC と複数の 3GSPS ADC と SYSREF 監視機能搭載、4 個の送信、6 個の受信、X バンド、RF サンプリング AFE

製品詳細

Applications Avionics & Defense, General purpose, Industrial, Test and Measurement Number of TXs and RXs 4 TX, 6 RX Number of DUCs per TX 2 Number of DDCs per RX 2 RF frequency (max) (MHz) 12000 RF frequency (min) (MHz) 600 Operating temperature range (°C) -40 to 85 Rating Catalog
Applications Avionics & Defense, General purpose, Industrial, Test and Measurement Number of TXs and RXs 4 TX, 6 RX Number of DUCs per TX 2 Number of DDCs per RX 2 RF frequency (max) (MHz) 12000 RF frequency (min) (MHz) 600 Operating temperature range (°C) -40 to 85 Rating Catalog
FCBGA (ABJ) 400 289 mm² 17 x 17 FCBGA (ALK) 400 289 mm² 17 x 17
  • Request full data sheet
  • Four RF sampling 12GSPS DACs
  • Six RF sampling 3GSPS ADCs
  • Maximum RF signal bandwidth:
    • 4TX: 1200 MHz; 2TX: 2400MHz
    • 4RX: 1200 MHz; 6RX: 600MHz
  • RF frequency range:
    • TX: 600MHz to 12GHz
    • RX: 5MHz to 12GHz
  • Digital step attenuators (DSA):
    • TX: 39dB range, 0.125dB steps
    • RX: 25dB range, 0.5dB steps
  • Digital Up-Converters (DUC) and Digital Down-Converters (DDC): Fast frequency hopping using 16 pre-configurable Numerically Controlled Oscillators (NCOs) in DDC and DUC
  • Flexible clocking options:
    • External RF clock
    • Internal PLL mode with low speed input clock
  • SerDes data interface:
    • JESD204B and JESD204C compatible
    • TX: 8 lanes, RX/FB: 8 lanes, up to 24.75Gbps
    • Subclass 1 multi-device synchronization
    • SYSREF alignment detector
  • Package: 17mm × 17mm FCBGA, 0.8mm pitch
  • Request full data sheet
  • Four RF sampling 12GSPS DACs
  • Six RF sampling 3GSPS ADCs
  • Maximum RF signal bandwidth:
    • 4TX: 1200 MHz; 2TX: 2400MHz
    • 4RX: 1200 MHz; 6RX: 600MHz
  • RF frequency range:
    • TX: 600MHz to 12GHz
    • RX: 5MHz to 12GHz
  • Digital step attenuators (DSA):
    • TX: 39dB range, 0.125dB steps
    • RX: 25dB range, 0.5dB steps
  • Digital Up-Converters (DUC) and Digital Down-Converters (DDC): Fast frequency hopping using 16 pre-configurable Numerically Controlled Oscillators (NCOs) in DDC and DUC
  • Flexible clocking options:
    • External RF clock
    • Internal PLL mode with low speed input clock
  • SerDes data interface:
    • JESD204B and JESD204C compatible
    • TX: 8 lanes, RX/FB: 8 lanes, up to 24.75Gbps
    • Subclass 1 multi-device synchronization
    • SYSREF alignment detector
  • Package: 17mm × 17mm FCBGA, 0.8mm pitch

The AFE7958 is a high performance, wide bandwidth multi-channel transceiver, integrating four (4T) RF sampling transmitter (TX) chains and a total of six (6R) RF sampling receivers. With operation up to 12GHz, the AFE enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This high density and configurability enables high-channel-count, multi-mission systems.

The TX and RX interface data rates can be chosen based on signal bandwidths, and is limited by the JESD204B/C interface speed. The data streams are matched to the DAC update rate or to the ADC conversion rate using interpolation in the DUC or decimation in the DDC.

The DAC runs at a maximum rate of 12GSPS, and has a mode to operate in the 2nd Nyquist, enabling the generation of RF signals up to 12GHz. A variable gain amplifier (termed as TDSA) enables changing the power output from the transmitter.

Each receive chain has a Digital Step Attenuator (RDSA) followed by a 3GSPS ADC which can convert higher Nyquist zones to digitize RF signals up to a maximum of 12GHz. Digital peak detectors at the ADC output can be configured to assist an external Automatic Gain control (AGC) loop to control LNA (external) gain and DSA (internal) attenuation.

The AFE7958 can be programmed using the SPI interface. The device also has several GPIOs that can be configured to provide interrupts and to achieve a fast control of functions like NCO switching.

The AFE7958 is a high performance, wide bandwidth multi-channel transceiver, integrating four (4T) RF sampling transmitter (TX) chains and a total of six (6R) RF sampling receivers. With operation up to 12GHz, the AFE enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This high density and configurability enables high-channel-count, multi-mission systems.

The TX and RX interface data rates can be chosen based on signal bandwidths, and is limited by the JESD204B/C interface speed. The data streams are matched to the DAC update rate or to the ADC conversion rate using interpolation in the DUC or decimation in the DDC.

The DAC runs at a maximum rate of 12GSPS, and has a mode to operate in the 2nd Nyquist, enabling the generation of RF signals up to 12GHz. A variable gain amplifier (termed as TDSA) enables changing the power output from the transmitter.

Each receive chain has a Digital Step Attenuator (RDSA) followed by a 3GSPS ADC which can convert higher Nyquist zones to digitize RF signals up to a maximum of 12GHz. Digital peak detectors at the ADC output can be configured to assist an external Automatic Gain control (AGC) loop to control LNA (external) gain and DSA (internal) attenuation.

The AFE7958 can be programmed using the SPI interface. The device also has several GPIOs that can be configured to provide interrupts and to achieve a fast control of functions like NCO switching.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート AFE7958 4T6R RF Sampling AFE with 12GSPS DACs and 3GSPS ADCs データシート PDF | HTML 2025年 8月 27日
証明書 AFE7958EVM EU Declaration of Conformity (DoC) 2025年 6月 30日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

AFE7958EVM — AFE7958 評価基板

AFE7958 評価基板 (EVM) は、高速トランシーバの AFE795x ファミリを評価できるように設計されています。評価基板には、AFE7958(4 送信・6 受信 RF サンプリング、600MHz 〜 12GHz、最大 1200MHz IBW、SYSREF 検出対応)が搭載されています。
ドライバまたはライブラリ

AFE79XX-HSC-DESIGN AFE79xx family high-speed transceiver design & support files

Find detailed product information on the AFE79xx product family (datasheets, EVM resources, software and firmware, reference designs, etc)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
RF トランシーバ
AFE7900 5MHz ~ 7.4GHz、最大 1,200MHz の IBW (入力帯域幅)、4 個の送信と 6 個の受信、RF サンプリング トランシーバ AFE7901 5MHz ~ 7.4GHz、最大 400MHz の IBW (入力帯域幅)、4 個の送信と 4 個の受信、RF サンプリング トランシーバ AFE7903 5MHz ~ 7.4GHz、最大 400MHz の IBW (入力帯域幅)、2 個の送信と 2 個の受信、RF サンプリング トランシーバ AFE7950 600MHz ~ 12GHz、最大 1,200MHz の IBW (入力帯域幅)、4 個の送信と 6 個の受信、RF サンプリング トランシーバ AFE7950-SP 放射線耐性保証 (RHA)、最大 12GHz、4 個の送信と 6 個の受信、RF サンプリング トランシーバ AFE7951 600MHz ~ 12GHz、最大 400MHz の IBW (入力帯域幅)、4 個の送信と 4 個の受信、RF サンプリング トランシーバ AFE7953 複数の 12GSPS DAC と複数の 3GSPS ADC 搭載、2 個の送信、2 個の受信、600MHz ~ 12GHz、RF サンプリング AFE (アナログ フロント エンド) AFE7955 12GSPS DAC と 3GSPS ADC 搭載、最大 1.2GHz の IBW (入力帯域幅)、2T3R (2 個の送信と 3 個の受信)、600MHz ~ 12GHz、RF サンプリング AFE AFE7958 複数の 12GSPS DAC と複数の 3GSPS ADC と SYSREF 監視機能搭載、4 個の送信、6 個の受信、X バンド、RF サンプリング AFE
RF レシーバ
AFE7906 5MHz ~ 12GHz、最大 1,200MHz の IBW (入力帯域幅)、6 チャネル RF サンプリング レシーバ
RF トランスミッタ
AFE7954 12GSPS DAC 搭載、最大 2.4GHz の IBW (入力帯域幅)、4 チャネル、600MHz ~ 12GHz、RF サンプリング AFE
ハードウェア開発
評価ボード
AFE7950EVM AFE7950 4 個の送信、6 個の受信、X バンド、RF サンプリング AFE の評価基板 AFE7900EVM AFE7900 4 個の送信、6 個の受信、5MHz ~ 7400MHz、RF サンプリング AFE の評価基板 AFE7958EVM AFE7958 評価基板
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
FCBGA (ABJ) 400 Ultra Librarian
FCBGA (ALK) 400 Ultra Librarian

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ