Home Battery management ICs Battery fuel gauges
Home
Battery management ICs
Battery fuel gauges

BQ27Z561

ACTIVE

Impedance Track™ integrated circuit gas gauge solution for 1-series

Order now
Data sheet

A newer version of this product is available

open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
BQ27Z561-R2 ACTIVE Impedance track battery gas gauge solution for 1-series cell li-ion battery packs SHA-256 authentication, low-voltage (2.0 V), black box recorder, enhanced charging algorithm

BQ27Z561

ACTIVE
Data sheet Order now

Product details

Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface HDQ, I2C Battery capacity (min) (mAh) 100 Battery capacity (max) (mAh) 32000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm, SHA-256 Authentication Operating temperature range (°C) -40 to 85 Rating Catalog
Cell chemistry Li-Ion/Li-Polymer Number of series cells Single Cell Communication interface HDQ, I2C Battery capacity (min) (mAh) 100 Battery capacity (max) (mAh) 32000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm, SHA-256 Authentication Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YPH) 12 2.8896 mm² 2.064 x 1.4
  • Supports high-side and low-side current sense resistors: down to 1mΩ
  • SHA-256 authentication responder for increased battery pack security
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error: < 1µV (typical)
  • Low-voltage operation: 2V
  • Supports pack-side gauging
  • Wide-range current applications: 1mA to > 5A
  • Active high or low interrupt pin
  • Reduced power modes (typical battery pack operating range conditions)
    • Typical SLEEP mode: < 11µA
    • Typical DEEP SLEEP mode: < 9µA
    • Typical OFF mode: < 1.9µA
  • Internal and external temperature sense functions
  • 400kHz I2C bus communications interface for high-speed programming and data access
  • HDQ one-wire for communication with host
  • Compact 12-pin DSBGA package (YPH)
  • Supports high-side and low-side current sense resistors: down to 1mΩ
  • SHA-256 authentication responder for increased battery pack security
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error: < 1µV (typical)
  • Low-voltage operation: 2V
  • Supports pack-side gauging
  • Wide-range current applications: 1mA to > 5A
  • Active high or low interrupt pin
  • Reduced power modes (typical battery pack operating range conditions)
    • Typical SLEEP mode: < 11µA
    • Typical DEEP SLEEP mode: < 9µA
    • Typical OFF mode: < 1.9µA
  • Internal and external temperature sense functions
  • 400kHz I2C bus communications interface for high-speed programming and data access
  • HDQ one-wire for communication with host
  • Compact 12-pin DSBGA package (YPH)

The Texas Instruments BQ27Z561 Impedance Track™ gas gauge solution is a highly integrated, accurate, 1-series cell gas gauge with a flash programmable custom reduced instruction-set CPU (RISC) and SHA-256 authentication for Li-ion and Li-polymer battery packs. The 1-series cell capability includes parallel cells for increased capacity.

The BQ27Z561 gas gauge communicates using I2C-compatible and HDQ one-wire interfaces and includes several key features that help facilitate accurate gas gauging applications. Integrated temperature sense functions (internal and external options) enable system and battery temperature measurements. The integrated SHA-256 functionality helps enable secure identification between systems and packs. The interrupt function facilitates the BQ27Z561 device to inform the system when a state-of-charge (SOC), voltage, or temperature fault occurs. The low-voltage operation enables the system to continue monitoring the battery, even in deeply discharged conditions. During low-activity situations, the device can be set to the low power coulomb counting (CC) mode, which allows the device to continue coulomb counting while significantly reducing operating current.

The Texas Instruments BQ27Z561 Impedance Track™ gas gauge solution is a highly integrated, accurate, 1-series cell gas gauge with a flash programmable custom reduced instruction-set CPU (RISC) and SHA-256 authentication for Li-ion and Li-polymer battery packs. The 1-series cell capability includes parallel cells for increased capacity.

The BQ27Z561 gas gauge communicates using I2C-compatible and HDQ one-wire interfaces and includes several key features that help facilitate accurate gas gauging applications. Integrated temperature sense functions (internal and external options) enable system and battery temperature measurements. The integrated SHA-256 functionality helps enable secure identification between systems and packs. The interrupt function facilitates the BQ27Z561 device to inform the system when a state-of-charge (SOC), voltage, or temperature fault occurs. The low-voltage operation enables the system to continue monitoring the battery, even in deeply discharged conditions. During low-activity situations, the device can be set to the low power coulomb counting (CC) mode, which allows the device to continue coulomb counting while significantly reducing operating current.
filter Find other Battery fuel gauges
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 13
Type Title Date
* Data sheet BQ27Z561 Impedance Track™ Battery Gas Gauge Solution for 1-Series Cell Li-Ion Battery Packs datasheet (Rev. C) PDF | HTML 30 Sep 2025
Application note A Method to Save Time from Chem ID Ready to Pack Sample Manufacturing PDF | HTML 23 Jul 2025
Application note How to Create and Program Authentication Keys into TI Battery Fuel Gauges PDF | HTML 05 Mar 2025
User guide BQ27Z561-R2 and BQ27Z558 Technical Reference Manual (Rev. C) PDF | HTML 03 Mar 2024
Application note Battery Gauging Algorithm Comparison PDF | HTML 04 Dec 2023
Certificate BQ27Z561EVM-011 EU RoHS Declaration of Conformity (DoC) (Rev. A) 12 Jul 2022
User guide BQ27Z561EVM-011 Single-Cell Impedance Track Technology (Rev. A) PDF | HTML 12 Jul 2022
Application note End of Discharge SOC Jump Elimination PDF | HTML 06 Apr 2020
Application note BQ27Z561-R1 to BQ27Z561-R2 Change List 26 Feb 2020
Application note Impedance Track Optimization for Applications Without Significant Rest Periods 15 Oct 2019
User guide bq27z561 Technical Reference Manual 26 Jun 2018
Application note Simple Guide to Chemical ID Selection Tool (GPC) (Rev. A) 05 Jun 2018
Application note Gauge Communication 12 Jan 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ27Z561EVM-011 — BQ27Z561 1S-cell programmable battery manager Evaluation module

This evaluation module (EVM) is a complete evaluation system for the BQ27Z561 battery management system. The EVM includes a BQ27Z561 integrated circuit (IC) and all other components necessary to monitor and predict capacity and other parameters of a 1-series Li-ion or Li-polymer battery pack. The (...)

User guide: PDF | HTML
Not available on TI.com
Application software & framework

BQSTUDIO-STABLE — Battery Management Studio (bqStudio) Software – stable version downloads for bq series of TI battery fuel gauges

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

Supported products & hardware

Supported products & hardware

Products
Battery monitors & balancers
  • BQ76942 — 3-series to 10-series multicell battery monitor and protector
  • BQ76952 — 3-s to 16-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4
Battery charger ICs
  • BQ24800 — SMBus 1-4 cell Buck battery charge controller to support hybrid power boost and battery boost mode
  • BQ25720 — SMBus 1- to 4-cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG
  • BQ25723 — I²C 1-4 cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG
  • BQ25731 — I2C 1-5 cell NVDC buck-boost battery charge controller with USB type-C PD support
  • BQ25790 — Integrated, NVDC, 5-A 1-cell to 4-cell switch-mode buck-boost battery charger
  • BQ25792 — I2C controlled, 5-A, 1-4 cell buck-boost charger with dual-input selector and USB PD 3.0 OTG output
Battery fuel gauges
  • BQ27220 — Single cell pack/system-side CEDV battery fuel (gas) gauge w/pre-programmed chemistry profiles
  • BQ27320 — Single cell pack/System-side CEDV battery fuel (gas) gauge
  • BQ27425-G1 — System-side Impedance Track™; fuel gauge with direct battery connection | gas gauge battery
  • BQ27425-G2A — System-side Impedance Track™; fuel gauge for LiCoO2 battery
  • BQ27425-G2B — System-side Impedance Track™; fuel gauge LiMn2O4 battery
  • BQ27520-G4 — System side Impedance Track™ fuel gauge with integrated LDO.
  • BQ27530-G1 — System-side Impedance-Track fuel (gas) gauge with direct battery connection
  • BQ27531-G1 — Battery management unit Impedance Track™ fuel (gas) gauge for bq2419x charger controller
  • BQ27532-G1 — Battery management unit Impedance Track™ fuel gauge for bq2425x charger
  • BQ27545-G1 — Single cell, pack side, Impedance Track™ fuel gauge
  • BQ27546-G1 — Single cell Impedance Track™ pack side fuel gauge with DSBGA package
  • BQ27621-G1 — System-side fuel gauge with Dynamic Voltage Correlation, battery gas gauge
  • BQ27741-G1 — Pack-side Impedance Track™(tm) fuel (gas) gauge with integrated protector
  • BQ27742-G1 — Single cell Li-ion battery fuel gauge with integrated protection | battery gas gauge
  • BQ27Z561 — Impedance Track™ integrated circuit gas gauge solution for 1-series
  • BQ28Z610 — Battery fuel gauge with integrated protector for 1-2 series packs
  • BQ34110 — Multi-chemistry high-cell Count battery fuel gauge with integrated rarely discharged module
  • BQ34210-Q1 — Automotive Qualified Single cell system-side CEDV fuel gauge
  • BQ34Z100-G1 — Multi-chemistry Impedance Track™ standalone fuel gauge | battery gas gauge
  • BQ35100 — Battery fuel gauge for non-rechargeable batteries (lithium primary) and end-of-service monitor
  • BQ4050 — 1-4 series CEDV battery fuel (gas) gauge
  • BQ40Z50 — 1-4 series Li-ion battery pack manager | battery fuel (gas) gauge
  • BQ40Z50-R1 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 1.0
  • BQ40Z50-R2 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 2.0
  • BQ40Z60 — Complete multi-cell battery manager | battery fuel (gas) gauge
  • BQ40Z80 — 2-s to 6-s battery pack manager with Impedance Track™ gas gauging
  • BQ78350 — Companion CEDV Fuel Gauge Battery Management Controller for bq76940 Monitor Family
  • BQ78350-R1 — CEDV li-ion gas gauge and battery management controller
  • BQ78Z100 — Impedance Track™ battery fuel (gas) gauge for 1-series to 2-series
Download options
Application software & framework

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

Supported products & hardware

Supported products & hardware

Products
Battery monitors & balancers
  • BQ76905 — Low-power monitor and protector for 2S to 5S with high accuracy cell voltage measurement
  • BQ76907 — Low-power monitor and protector for 2S to 7S with high accuracy cell voltage measurement
  • BQ769142 — 3-s to 14-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4 battery
  • BQ76942 — 3-series to 10-series multicell battery monitor and protector
  • BQ76952 — 3-s to 16-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4
  • BQ76972 — 3s-to-16s high-accuracy battery monitor and protector for Li-ion, Li-poly and LiFePO4
Battery charger ICs
  • BQ24800 — SMBus 1-4 cell Buck battery charge controller to support hybrid power boost and battery boost mode
  • BQ25720 — SMBus 1- to 4-cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG
  • BQ25723 — I²C 1-4 cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG
  • BQ25731 — I2C 1-5 cell NVDC buck-boost battery charge controller with USB type-C PD support
  • BQ25756 — Stand-alone or I²C-controlled 70-V bidirectional buck-boost charge controller with MPPT
  • BQ25790 — Integrated, NVDC, 5-A 1-cell to 4-cell switch-mode buck-boost battery charger
  • BQ25792 — I2C controlled, 5-A, 1-4 cell buck-boost charger with dual-input selector and USB PD 3.0 OTG output
Battery fuel gauges
  • BQ27220 — Single cell pack/system-side CEDV battery fuel (gas) gauge w/pre-programmed chemistry profiles
  • BQ27320 — Single cell pack/System-side CEDV battery fuel (gas) gauge
  • BQ27425-G1 — System-side Impedance Track™; fuel gauge with direct battery connection | gas gauge battery
  • BQ27425-G2A — System-side Impedance Track™; fuel gauge for LiCoO2 battery
  • BQ27425-G2B — System-side Impedance Track™; fuel gauge LiMn2O4 battery
  • BQ27427 — Single-cell battery fuel gauge with pre-programmed chemistry and integrated sense resistor
  • BQ27520-G4 — System side Impedance Track™ fuel gauge with integrated LDO.
  • BQ27530-G1 — System-side Impedance-Track fuel (gas) gauge with direct battery connection
  • BQ27531-G1 — Battery management unit Impedance Track™ fuel (gas) gauge for bq2419x charger controller
  • BQ27532-G1 — Battery management unit Impedance Track™ fuel gauge for bq2425x charger
  • BQ27545-G1 — Single cell, pack side, Impedance Track™ fuel gauge
  • BQ27546-G1 — Single cell Impedance Track™ pack side fuel gauge with DSBGA package
  • BQ27621-G1 — System-side fuel gauge with Dynamic Voltage Correlation, battery gas gauge
  • BQ27741-G1 — Pack-side Impedance Track™(tm) fuel (gas) gauge with integrated protector
  • BQ27742-G1 — Single cell Li-ion battery fuel gauge with integrated protection | battery gas gauge
  • BQ27Z561 — Impedance Track™ integrated circuit gas gauge solution for 1-series
  • BQ27Z746 — Pack-side, single-cell Impedance Track™ technology fuel gauge with integrated protector
  • BQ28Z610 — Battery fuel gauge with integrated protector for 1-2 series packs
  • BQ34110 — Multi-chemistry high-cell Count battery fuel gauge with integrated rarely discharged module
  • BQ34210-Q1 — Automotive Qualified Single cell system-side CEDV fuel gauge
  • BQ34Z100-G1 — Multi-chemistry Impedance Track™ standalone fuel gauge | battery gas gauge
  • BQ35100 — Battery fuel gauge for non-rechargeable batteries (lithium primary) and end-of-service monitor
  • BQ4050 — 1-4 series CEDV battery fuel (gas) gauge
  • BQ40Z50 — 1-4 series Li-ion battery pack manager | battery fuel (gas) gauge
  • BQ40Z50-R1 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 1.0
  • BQ40Z50-R2 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 2.0
  • BQ40Z60 — Complete multi-cell battery manager | battery fuel (gas) gauge
  • BQ40Z80 — 2-s to 6-s battery pack manager with Impedance Track™ gas gauging
  • BQ78350 — Companion CEDV Fuel Gauge Battery Management Controller for bq76940 Monitor Family
  • BQ78350-R1 — CEDV li-ion gas gauge and battery management controller
  • BQ78Z100 — Impedance Track™ battery fuel (gas) gauge for 1-series to 2-series
Battery protectors
  • BQ77307 — Low-power protector for 2S to 7S with high accuracy cell voltage measurement
Hardware development
Evaluation board
Download options
Software programming tool

BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products

BQ-BATTERY-PROGRAMMER-SW software development kit (SDK) is a collection of robust software command line tools that assist with the process of programming, testing, or assembling packs that use TI Battery management products. The executables in this software work with the MKST-3P-ALT-EV2300 MKS (...)

Supported products & hardware

Supported products & hardware

Products
Battery fuel gauges
  • BQ20Z40 — SBS Compliant Gas Gauge with Impedance Track Technology for use with BQ29330
  • BQ20Z40-R1 — SBS 1.1 compliant Gas Gauge with Impedance Track™ Technology
  • BQ20Z45 — SBS 1.1 compliant Gas Gauge with Impedance Track Technology and Advanced Charging Algorithm
  • BQ20Z70-V150 — SBS 1.1-compliant gas gauge enabled with Impedance Track™ technology
  • BQ20Z70-V160 — SBS 1.1-compliant gas gauge enabled with Impedance Track™ technology for use with the bq29330
  • BQ20Z80 — SBS 1.1-compliant gas gauge enabled with Impedance Track™; technology for use with the bq29312
  • BQ20Z80-V102 — SBS 1.1-compliant gas gauge enabled w/Impedance Track™ technology
  • BQ20Z80-V110 — SBS 1.1-compliant gas gauge enabled w/Impedance Track™ technology with FW v1.10
  • BQ20Z80A-V110 — SBS 1.1 compliant gas gauge enabled with Impedance Track™; technology for use with the bq29312A
  • BQ27505-J2 — System-side Impedance Track™; fuel gauge with FW v2.15
  • BQ27505-J3 — System-side Impedance Track™; fuel gauge with FW v2.20
  • BQ27505-J4 — System-side Impedance Track™; fuel gauge with FW v2.24
  • BQ27505-J5 — System-side Impedance Track™; fuel gauge with FW v2.29
  • BQ27520-G4 — System side Impedance Track™ fuel gauge with integrated LDO.
  • BQ27530-G1 — System-side Impedance-Track fuel (gas) gauge with direct battery connection
  • BQ27531-G1 — Battery management unit Impedance Track™ fuel (gas) gauge for bq2419x charger controller
  • BQ27532-G1 — Battery management unit Impedance Track™ fuel gauge for bq2425x charger
  • BQ27545-G1 — Single cell, pack side, Impedance Track™ fuel gauge
  • BQ27546-G1 — Single cell Impedance Track™ pack side fuel gauge with DSBGA package
  • BQ27741-G1 — Pack-side Impedance Track™(tm) fuel (gas) gauge with integrated protector
  • BQ27742-G1 — Single cell Li-ion battery fuel gauge with integrated protection | battery gas gauge
  • BQ27Z558 — Single-cell Impedance Track™ technology gas gauge with 1.2V IO support
  • BQ27Z561 — Impedance Track™ integrated circuit gas gauge solution for 1-series
  • BQ27Z561-R1 — Impedance Track™ battery gas gauge solution for 1-series cell Li-ion battery packs
  • BQ27Z561-R2 — Impedance track battery gas gauge solution for 1-series cell li-ion battery packs
  • BQ27Z746 — Pack-side, single-cell Impedance Track™ technology fuel gauge with integrated protector
  • BQ27Z758 — 1-series Impedance Track™ battery fuel gauge and protection with true 0V charging
  • BQ28Z610 — Battery fuel gauge with integrated protector for 1-2 series packs
  • BQ28Z610-R1 — Battery fuel gauge with integrated protector for 1-2 series packs
  • BQ28Z620 — Battery fuel gauge with integrated protector for 1-series to 2 series packs with 1.2-V I/O
  • BQ3050 — SBS 1.1-compliant 2-s to 4-s battery gas gauge & protection
  • BQ3055 — 2-series, 3-series, and 4-series Li-ion battery pack manager
  • BQ3060 — SBS 1.1-compliant gas gauge and protector
  • BQ30Z554-R1 — 2 series, 3 series, and 4 series Li-ion battery pack manager
  • BQ34110 — Multi-chemistry high-cell Count battery fuel gauge with integrated rarely discharged module
  • BQ34210-Q1 — Automotive Qualified Single cell system-side CEDV fuel gauge
  • BQ34Z100 — 1-s to 16-s Impedance Track™ fuel gauge | battery gas gauge
  • BQ34Z100-G1 — Multi-chemistry Impedance Track™ standalone fuel gauge | battery gas gauge
  • BQ34Z100-R2 — Multichemistry Impedance Track™ stand-alone fuel gauge
  • BQ34Z110 — Wide range fuel gauge with Impedance Track™; for lead acid batteries | battery gas gauge
  • BQ35100 — Battery fuel gauge for non-rechargeable batteries (lithium primary) and end-of-service monitor
  • BQ4050 — 1-4 series CEDV battery fuel (gas) gauge
  • BQ40Z50 — 1-4 series Li-ion battery pack manager | battery fuel (gas) gauge
  • BQ40Z50-R1 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 1.0
  • BQ40Z50-R2 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 2.0
  • BQ78350 — Companion CEDV Fuel Gauge Battery Management Controller for bq76940 Monitor Family
  • BQ78350-R1 — CEDV li-ion gas gauge and battery management controller
  • BQ78350-R1A — CEDV li-ion gas gauge and battery management controller
Hardware development
Evaluation board
  • ADVANCED-BQMTESTER — Texas Instruments Advanced bqMTester Multi-Station Test and Program Board
  • BQ27510EVM — System-Side Single-Cell Impedance Track™ Technology Evaluation Module  | Battery Fuel Gauge
  • BQ27520EVM — System-Side Impedance Track™ Battery Fuel Gauge Evaluation Module | Gas Gauge
  • BQ27530EVM — BQ27530EVM System-Side Impedance-Track Fuel (Gas) Gauge Direct Battery Connection Evaluation Module
  • BQ27531EVM — Battery Management Unit Impedance Track Fuel (Gas) Gauge Charger Controller Evaluation Module
  • BQ27532EVM-656 — Battery Charging Solution Evaluation Module
  • BQ27542EVM — Li-ion Battery Fuel Gauge Evaluation Module
  • BQ27546EVM-702 — bq27546 Gas Gauge with Impedance Track™ Technology
  • BQ27741EVM — BQ27741EVM Pack-Side Impedance Track Fuel (Gas) Gauge Integrated Protector Evaluation Module
  • BQ27742EVM — bq27742-G1 Single Cell Li-ion Battery Fuel (Gas) Gauge Programmable Evaluation Module
  • BQ27750EVM-837 — BQ27750 1-Cell Programmable Battery Manager Evaluation Module
  • BQ27Z558EVM-084 — BQ27Z558 evaluation module for single-cell Impedance Track™ technology gas gauge
  • BQ27Z561EVM-011 — BQ27Z561 1S-cell programmable battery manager Evaluation module
  • BQ27Z746EVM-047 — BQ27Z746 evaluation module Impedance Track™ technology battery gas gauge with protection solution
  • BQ28Z610EVM-532 — BQ28Z610 1-Cell to 2-Cell Programmable Battery Manager Evaluation Module
  • BQ28Z620EVM-071 — BQ28Z620 evaluation module for one- or two-series cell Li-Ion Impedance Track™ battery fuel gauge
  • BQ3050EVM-001 — bq3050EVM SBS 1.1 Compliant Advanced Gas Gauge EVM
  • BQ34110EVM-796 — bq34110 Multi-Chemistry CEDV Battery Gas Gauge for Rarely Discharged Applications Evaluation Module
  • BQ34210IQ1EVM-826 — bq34210-Q1 Evaluation Module for System Side CEDV Fuel Gauge
  • BQ34Z100EVM — Bq34z100EVM 1s to 16s Impedance Track Fuel Gauge Battery Evaluation Module | Gas Gauge Battery
  • BQ35100EVM-795 — bq35100 Lithium Primary Cell Evaluation Module Using End-of-Service Monitor Gas Gauging
  • BQ4050EVM-561 — 1 Series, 2 Series, 3 Series, and 4 Series Li-Ion Battery Pack Manager Evaluation Module
  • BQ40Z50EVM-561 — BQ40Z50 evaluation board 
  • BQ40Z60EVM-578 — 2 Series, 3 Series, and 4 Series Li-Ion Battery Pack Manager Evaluation Module
  • BQ40Z80EVM-020 — BQ40Z80 2s-7s Battery Gauge Evaluation Module
  • BQMTESTER — BQMTESTER Multi Channel Test and Program Board
  • MKST-3P-ALT-EV2300 — MKS Technology alternative for EV2300 communications transceiver
Software
Application software & framework
  • BQ-HI-PRODUCTION — Production Application Software for Hi-Cell Count Battery Fuel (Gas) Gauges
  • BQ27Z561-R2-DEVICE-FW — BQ27Z561 firmware: impedance track battery gas gauge solution for 1-s cell li-ion battery
  • BQEVSW — BQ evaluation software (BQEVSW) v0.0.92 for BQ30Z554-R1
  • BQPRODUCTION — Production tool for fourth generation multicell battery fuel (gas) gauges
  • BQPRODUCTION-SINGLECELL — Production Software for Single Cell Battery Fuel (Gas) Gauges
  • BQSTUDIO — Battery Management Studio (bqStudio) Software
Support software
Software programming tool
Firmware
Download options
Software programming tool

BQ-PRODUCTION-SINGLE-CELL-SW — Production software for single cell battery fuel (gas) gauges

SingleCellbqProduction offers a full suite of robust tools to assist with the process of configuring, calibrating, manufacturing and tracking printed circuit boards utilizing TI's battery battery management products. This includes features that allow writing a golden image followed by different (...)

Supported products & hardware

Supported products & hardware

Products
Battery fuel gauges
  • BQ27320 — Single cell pack/System-side CEDV battery fuel (gas) gauge
  • BQ27Z561 — Impedance Track™ integrated circuit gas gauge solution for 1-series
  • BQ27Z561-R1 — Impedance Track™ battery gas gauge solution for 1-series cell Li-ion battery packs
  • BQ27Z561-R2 — Impedance track battery gas gauge solution for 1-series cell li-ion battery packs
Hardware development
Evaluation board
  • BQ27320EVM-766 — bq27320 System-Side Fuel Gauge with Integrated LDO Evaluation Module
  • BQ27Z561EVM-011 — BQ27Z561 1S-cell programmable battery manager Evaluation module
Software
Application software & framework
  • BQSTUDIO — Battery Management Studio (bqStudio) Software
  • BQ27Z561-R2-DEVICE-FW — BQ27Z561 firmware: impedance track battery gas gauge solution for 1-s cell li-ion battery
Download options
Software programming tool

BQKEYPROGRAMMER — Program Key Software for Battery Fuel Gauges

Several TI Fuel Gauge products support authentication for anti-counterfeit protection of battery packs. The selection of the battery authentication scheme between SHA and ECC is left to the user to decide. bqKeyPackager is provided to package the key, and bqKeyProgrammer is provided to program the (...)
View Options
Support software

BQ27Z561-R2-DEVICE-FW — BQ27Z561 Firmware

The BQ27Z561-R2-DEVICE-FW is a firmware (FW) release that can be flashed onto any existing hardware such as the BQ27Z561 or BQ27Z561-R1 product. The firmware incorporates the patented Impedance Track™ technology to create a pack-based solution that provides a rich array of features for gas (...)

Supported products & hardware

Supported products & hardware

Products
Battery fuel gauges
  • BQ27Z561 — Impedance Track™ integrated circuit gas gauge solution for 1-series
  • BQ27Z561-R1 — Impedance Track™ battery gas gauge solution for 1-series cell Li-ion battery packs
  • BQ27Z561-R2 — Impedance track battery gas gauge solution for 1-series cell li-ion battery packs
Software
Application software & framework
Download
Package Pins CAD symbols, footprints & 3D models
DSBGA (YPH) 12 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos