AFE7920EVM

The AFE7920 evaluation module (EVM) is an RF-sampling transceiver platform that can be configured to support up to four-transmit four-receive plus two-feedback (4T4R + 2FB) channels simultaneously.

The board evaluates the AFE7920 device, which is a quad-channel RF-sampling analog front end (AFE) with 14-bit 12-GSPS digital-to-analog converters (DACs), 14-bit 3-GSPS analog-to-digital converters (ADCs), and on-chip integrated phase-locked loop (PLL) and voltage-controlled oscillator (VCO) for high-frequency clock generation for DACs and ADCs.

AFE7920EVM has options to use dual digital up converters and down converters in each channel to synthesize and digitize multiple wideband signals with high dynamic range simultaneously. On-chip integrated digital step attenuator (DSA) for the receiver channels and DSA functionality for the transmitter channels is supported. Eight JESD204B/C-compatible serializer/deserializer (SerDes) transceivers running up to 29.5 Gbps can be used for providing inputs and outputs to/from the AFE7920 device through the onboard FPGA mezzanine card (FMC) connector.

AFE7920EVM includes the LMK04828 clock generator for providing a reference signal to the AFE on-chip PLL and for generating the required system-reference (SYSREF) signals for the JESD204B/C protocol. Also included is the option for providing an low-phase-noise external clocking solution.

AFE7920EVM implements an efficient low-dropout (LDO)-less power-management solution using only DC-DC converters for the required power rails. The design interfaces with our pattern/capture card solution (TSW14J58EVM, sold separately), as well as many FPGA development kits.
 

Features

RF transceivers

RF transmitters