ホーム パワー・マネージメント LCD / OLED ディスプレイ向けの電源とドライバ

TPS65163

アクティブ

4 チャネル、LCD バイアス、9 チャネル・レベル・シフタ内蔵

製品詳細

Display type LCD unipolar IC integration LCD bias, LCD level shifter Vin (min) (V) 8.6 Vin (max) (V) 14.7 Applications 13 to 21 inches, 21 inches and above Source driver voltage (min) (V) 9.6 Source driver voltage (max) (V) 18.5 Level shifter/scan driver (Ch) 9 Features GPM or GVS, Level shifter, Output discharge, Reset generator Topology Boost, Buck Rating Catalog Operating temperature range (°C) -40 to 85
Display type LCD unipolar IC integration LCD bias, LCD level shifter Vin (min) (V) 8.6 Vin (max) (V) 14.7 Applications 13 to 21 inches, 21 inches and above Source driver voltage (min) (V) 9.6 Source driver voltage (max) (V) 18.5 Level shifter/scan driver (Ch) 9 Features GPM or GVS, Level shifter, Output discharge, Reset generator Topology Boost, Buck Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGZ) 48 49 mm² 7 x 7
  • 8.6-V to 14.7-V Input Voltage Range
  • 2.8-A Boost Converter Switch Current Limit
  • Boost Converter Output Voltages up to 18.5 V
  • Boost and Buck Converter Short-Circuit Protection
  • 1.5-A Buck Converter (3.3 V) Switch Current Limit
  • Fixed 750-kHz Switching Frequency for Buck and Boost Converters
  • Buck Converter and Boost Converter Soft-Start
  • Two Charge-Pump Controllers to Regulate VGH and VGL
  • Control Signal for External High-Side MOSFET Isolation Switch
  • 9-Channel Level Shifter Organized in Two Groups of 7 and 2 Channels (Separate VGH)
  • Gate Shaping (Level Shifter Channels 1 to 6)
  • Display Panel Discharge Function
  • Supports VGH Voltages up to 38 V
  • Supports VGL Voltages Down to –13 V
  • Reset Signal With Programmable Reset-Pulse Duration
  • Thermal Shutdown
  • 48-Pin 7-mm × 7-mm QFN Package
  • APPLICATIONS
    • LCD TVs and Monitors Using GIP Technology
  • 8.6-V to 14.7-V Input Voltage Range
  • 2.8-A Boost Converter Switch Current Limit
  • Boost Converter Output Voltages up to 18.5 V
  • Boost and Buck Converter Short-Circuit Protection
  • 1.5-A Buck Converter (3.3 V) Switch Current Limit
  • Fixed 750-kHz Switching Frequency for Buck and Boost Converters
  • Buck Converter and Boost Converter Soft-Start
  • Two Charge-Pump Controllers to Regulate VGH and VGL
  • Control Signal for External High-Side MOSFET Isolation Switch
  • 9-Channel Level Shifter Organized in Two Groups of 7 and 2 Channels (Separate VGH)
  • Gate Shaping (Level Shifter Channels 1 to 6)
  • Display Panel Discharge Function
  • Supports VGH Voltages up to 38 V
  • Supports VGL Voltages Down to –13 V
  • Reset Signal With Programmable Reset-Pulse Duration
  • Thermal Shutdown
  • 48-Pin 7-mm × 7-mm QFN Package
  • APPLICATIONS
    • LCD TVs and Monitors Using GIP Technology

The TPS65163 integrates a boost converter, buck converter, reset generator, two charge pump controllers and a nine-channel level shifter in a single device.

In typical display panel applications, the boost converter generates the display panel source voltage, VS; the buck converter generates the system logic supply, VLOGIC; and the two charge pump controllers regulate the external charge pumps generating the display transistors’ on and off supplies, VGH and VGL.

The level shifters transform the logic-level control signals generated by the display timing controller into the high-level signals needed by the LCD panel. The nine level-shifter channels are organized in two groups, each with its own positive supply voltage (VGH). Each channel uses a low-impedance output stage to achieve fast rise and fall times, even when driving the capacitive loads present in LCD applications. Channels 1 to 6 also support gate voltage shaping.

The TPS65163 also provides a reset circuit that monitors the buck converter output (VLOGIC) and generates a reset signal for the timing controller during power up and power down.

A control signal can also be generated to control an external MOSFET isolation switch located between the output of the boost converter and the display panel.

The TPS65163 integrates a boost converter, buck converter, reset generator, two charge pump controllers and a nine-channel level shifter in a single device.

In typical display panel applications, the boost converter generates the display panel source voltage, VS; the buck converter generates the system logic supply, VLOGIC; and the two charge pump controllers regulate the external charge pumps generating the display transistors’ on and off supplies, VGH and VGL.

The level shifters transform the logic-level control signals generated by the display timing controller into the high-level signals needed by the LCD panel. The nine level-shifter channels are organized in two groups, each with its own positive supply voltage (VGH). Each channel uses a low-impedance output stage to achieve fast rise and fall times, even when driving the capacitive loads present in LCD applications. Channels 1 to 6 also support gate voltage shaping.

The TPS65163 also provides a reset circuit that monitors the buck converter output (VLOGIC) and generates a reset signal for the timing controller during power up and power down.

A control signal can also be generated to control an external MOSFET isolation switch located between the output of the boost converter and the display panel.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
TPS65142 アクティブ LCD パネル向け、6 チャネル WLED ドライバ搭載、LCD バイアス・ソリューション Integrated backlight driver.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
7 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LCD Bias Supply with Integrated Level Shifters データシート 2009年 9月 14日
アプリケーション・ノート 昇圧コンバータの電力段に関する基本的な計算 (Rev. D 翻訳版) PDF | HTML 英語版 (Rev.D) PDF | HTML 2022年 12月 1日
アプリケーション・ノート Basic Calculation of a Boost Converter's Power Stage... (Rev. D) PDF | HTML 2022年 11月 21日
アプリケーション・ノート Understanding Undervoltage Lockout in Power Devices (Rev. A) 2018年 9月 19日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート Generation of a VCOM buffer input using PWM signal 2015年 12月 21日
アプリケーション・ノート Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015年 8月 17日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI を使用すると、内蔵のライブラリを使用して、複雑なミックスド (...)
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
VQFN (RGZ) 48 Ultra Librarian

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ