低ノイズ、広帯域、完全差動出力、プログラマブル ゲイン、計測アンプ

製品詳細

PGA/VGA PGA Number of channels 1 Vs (min) (V) 9 Vs (max) (V) 36 Input type Differential Output type Differential Input offset drift (±) (typ) (µV/°C) 0.3 Interface type GPIO BW at Acl (MHz) 8 Acl, min spec gain (V/V) 0.5 Gain (max) (dB) 100 Architecture Bipolar Features Fully Differential, Overvoltage protection, Super-beta Vos (offset voltage at 25°C) (typ) (mV) 0.05 Input voltage noise (typ) (µV√Hz) 0.034 Slew rate (typ) (V/µs) 35 Iq per channel (typ) (mA) 5.2 Gain error (typ) (%) 0.01 Gain drift (max) (ppm/°C) 2 Rating Catalog Operating temperature range (°C) -40 to 125
PGA/VGA PGA Number of channels 1 Vs (min) (V) 9 Vs (max) (V) 36 Input type Differential Output type Differential Input offset drift (±) (typ) (µV/°C) 0.3 Interface type GPIO BW at Acl (MHz) 8 Acl, min spec gain (V/V) 0.5 Gain (max) (dB) 100 Architecture Bipolar Features Fully Differential, Overvoltage protection, Super-beta Vos (offset voltage at 25°C) (typ) (mV) 0.05 Input voltage noise (typ) (µV√Hz) 0.034 Slew rate (typ) (V/µs) 35 Iq per channel (typ) (mA) 5.2 Gain error (typ) (%) 0.01 Gain drift (max) (ppm/°C) 2 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN (RGT) 16 9 mm² 3 x 3
  • Eight pin-programmable decade (scope) gains
    • G (V/V) = ½, 1, 2, 5, 10, 20, 50, and 100
  • Fully differential outputs
  • Output common-mode control
  • Low gain error drift: ±2ppm/°C (maximum)
  • Faster signal processing:
    • Wide bandwidth: 6.2MHz (G < 10), 2.4MHz (G = 50, 100)
    • Input stage noise: 8.5nV/√Hz at G > 10V/V
    • Filter option to achieve better SNR
  • Input overvoltage protection to ±40V beyond supplies
  • Input-stage supply range:
    • Single supply: 9V to 36V
    • Dual supply: ±4.5V to ±18V
  • Independent output power-supply pins
  • Output-stage supply range:
    • Single supply: 4.5V to 36V
    • Dual supply: ±2.25V to ±18V
  • Specified temperature range: ­–40°C to +125°C
  • Small package: 3mm × 3mm VQFN
  • Eight pin-programmable decade (scope) gains
    • G (V/V) = ½, 1, 2, 5, 10, 20, 50, and 100
  • Fully differential outputs
  • Output common-mode control
  • Low gain error drift: ±2ppm/°C (maximum)
  • Faster signal processing:
    • Wide bandwidth: 6.2MHz (G < 10), 2.4MHz (G = 50, 100)
    • Input stage noise: 8.5nV/√Hz at G > 10V/V
    • Filter option to achieve better SNR
  • Input overvoltage protection to ±40V beyond supplies
  • Input-stage supply range:
    • Single supply: 9V to 36V
    • Dual supply: ±4.5V to ±18V
  • Independent output power-supply pins
  • Output-stage supply range:
    • Single supply: 4.5V to 36V
    • Dual supply: ±2.25V to ±18V
  • Specified temperature range: ­–40°C to +125°C
  • Small package: 3mm × 3mm VQFN

The PGA854 is a wide-bandwidth, high-voltage, low-noise programmable gain instrumentation amplifier with differential output. The PGA854 is equipped with eight decade (scope) gain settings, from an attenuating gain of 0.5V/V to a maximum of 100V/V. Gain is set using three digital gain selection pins.

The PGA854 architecture is optimized to drive inputs of high-resolution, precision analog-to-digital converters (ADCs) with sampling rates up to 1MSPS without the need for an additional ADC driver. The output-stage power supplies are decoupled from the input stage to protect the ADC or downstream devices against overdrive damage.

The super-beta input transistors offer an impressively low input bias current, which in turn provides a very low input current noise density of 0.3pA/√Hz, making the PGA854 a versatile choice for virtually any sensor type. The low-noise current-feedback front-end architecture offers exceptional gain flatness even at high frequencies, making the PGA854 an excellent high-impedance sensor readout device. Integrated protection circuitry on the input pins handles overvoltages of up to ±40V beyond the power-supply voltages.

The PGA854 is a wide-bandwidth, high-voltage, low-noise programmable gain instrumentation amplifier with differential output. The PGA854 is equipped with eight decade (scope) gain settings, from an attenuating gain of 0.5V/V to a maximum of 100V/V. Gain is set using three digital gain selection pins.

The PGA854 architecture is optimized to drive inputs of high-resolution, precision analog-to-digital converters (ADCs) with sampling rates up to 1MSPS without the need for an additional ADC driver. The output-stage power supplies are decoupled from the input stage to protect the ADC or downstream devices against overdrive damage.

The super-beta input transistors offer an impressively low input bias current, which in turn provides a very low input current noise density of 0.3pA/√Hz, making the PGA854 a versatile choice for virtually any sensor type. The low-noise current-feedback front-end architecture offers exceptional gain flatness even at high frequencies, making the PGA854 an excellent high-impedance sensor readout device. Integrated protection circuitry on the input pins handles overvoltages of up to ±40V beyond the power-supply voltages.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート PGA854 Low-Noise, Wide-Bandwidth, Decade Gain, Precision Programmable Gain Instrumentation Amplifier データシート PDF | HTML 2025年 8月 25日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

PGA855EVM — PGA855 完全差動出力、プログラマブル ゲイン アンプの評価基板

PGA855評価基板 (EVM) は、複数の差動出力を採用した高精度プログラマブル ゲイン アンプである PGA855 を評価するための開発プラットフォームです。PGA855 は、複数の完全差動入力を採用した高性能 A/D コンバータ (ADC) の入力駆動向けに最適化済みです。

ユーザー ガイド: PDF | HTML
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI を使用すると、内蔵のライブラリを使用して、複雑なミックスド (...)
シミュレーション・ツール

TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

TINA は DesignSoft (...)

ユーザー ガイド: PDF
英語版 (Rev.A): PDF
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
VQFN (RGT) 16 Ultra Librarian

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ