BQ27Z855
この製品に対応するパラメータはありません。
- Fully integrated battery fuel gauge, linear battery charger, protector, and authenticator
- Battery chemistries supported include Li-ion with LCO, NMC, or LFP cathodes
- Battery fuel gauging based on patented Dynamic Z-Track technology
- Automatically adjusts for aging, temperature, and rate-induced effects on the battery
- Fully featured battery linear charger
- CC/CV charging up to 2A with JEITA-compliant integrated Advanced Charge Algorithm (ACA)
- Dynamic Power Path Management
- MINSYS mode to ensure system voltage does not drop below target threshold while charging with a weak input
- SUPPLEMENT mode with ultra fast switching time to ensure system does not brown out during loads while charging
- Ideal diode (ID) mode during discharge to prevent voltage drop to system load
- PACK+ terminal voltage tolerance of +24V with 1kΩ RPACK value
- High-accuracy analog front end with two independent ADCs:
- 18-bit low offset delta-sigma ADC for Coulomb counting with ±100mV input range
- 16-bit delta-sigma ADC for cell voltage and internal and external temperature sensors
- Programmable safety and protection:
- Hardware-level protections
- Over Voltage Protection (OVP)
- Under Voltage Protection (UVP)
- Over Current Charging (OCC)
- Over Current Discharging (OCD)
- Short Circuit Discharging (SCD)
- Firmware-level protections
- OVP, UVP, OCC, and OCD
- Under Temperature (UT)
- Over Temperature (OT)
- FET Failure (FETF)
- Charge Timeout (CTO)
- Hardware-level protections
- ECC ECDSA authentication support with secure memory
- True zero-volt charging to support dead battery charging
- Integrated RTC with calendar and time of day
- Ultra-compact, 15-ball DSBGA package (YAH)
The Texas Instruments BQ27Z855 Dynamic Z-Trackgas gauge solution is a fully integrated, accurate 1-series cell gas gauge, JEITA-compliant linear battery charger, protection, and authentication solution.
The BQ27Z855 gas gauge communicates through an I2C compatible interface and combines an ultra-low power ARM M0 RISC processor, high accuracy analog measurement capabilities, integrated flash memory, high-side NMOS FET drivers, and ECC ECDSA authentication to provide a complete, high-performance battery management solution.
この製品に対する詳細情報はありません。
技術資料
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
5 をすべて表示
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | ユーザー・ガイド | BQ27Z855 Technical Reference Manual (Rev. A) | PDF | HTML | 2026/07/21 | ||
| アプリケーション・ノート | バッテリ残量測定アルゴリズムの比較 | PDF | HTML | PDF | HTML | 2026/04/28 | ||
| アプリケーション・ノート | Dynamic Z-Track™ テクノロジー：動的負荷アプリケーション向け の高度なバッテリ残量計アルゴリズム (Rev. A 翻訳版) | PDF | HTML | 英語版 (Rev.A) | PDF | HTML | 2025/10/13 | |
| アプリケーション・ノート | TI バッテリー残量計への楕円曲線暗号による認証機能の実装 | PDF | HTML | 英語版 | PDF | HTML | 2025/07/03 | |
| アプリケーション・ノート | How to Create and Program Authentication Keys into TI Battery Fuel Gauges | PDF | HTML | 2025/03/05 |