NUEVO

BQ27Z855

ACTIVO

Indicador batería c/cargador lineal integrado, protección y autentic. p/paquetes de 1 celda

Haga su pedido ahora

Guías de usuario

document-pdfAcrobat
BQ27Z855 Technical Reference Manual (Rev. A) (Inglés)

BQ27Z855

ACTIVO

Haga su pedido ahora

Detalles del producto

No hay parámetros disponibles para este producto.

Fully integrated battery fuel gauge, linear battery charger, protector, and authenticator
Battery chemistries supported include Li-ion with LCO, NMC, or LFP cathodes
Battery fuel gauging based on patented Dynamic Z-Track technology
- Automatically adjusts for aging, temperature, and rate-induced effects on the battery
Fully featured battery linear charger
- CC/CV charging up to 2A with JEITA-compliant integrated Advanced Charge Algorithm (ACA)
- Dynamic Power Path Management
  - MINSYS mode to ensure system voltage does not drop below target threshold while charging with a weak input
  - SUPPLEMENT mode with ultra fast switching time to ensure system does not brown out during loads while charging
- Ideal diode (ID) mode during discharge to prevent voltage drop to system load
- PACK+ terminal voltage tolerance of +24V with 1kΩ RPACK value
High-accuracy analog front end with two independent ADCs:
- 18-bit low offset delta-sigma ADC for Coulomb counting with ±100mV input range
- 16-bit delta-sigma ADC for cell voltage and internal and external temperature sensors
Programmable safety and protection:
- Hardware-level protections
  - Over Voltage Protection (OVP)
  - Under Voltage Protection (UVP)
  - Over Current Charging (OCC)
  - Over Current Discharging (OCD)
  - Short Circuit Discharging (SCD)
- Firmware-level protections
  - OVP, UVP, OCC, and OCD
  - Under Temperature (UT)
  - Over Temperature (OT)
  - FET Failure (FETF)
  - Charge Timeout (CTO)
ECC ECDSA authentication support with secure memory
True zero-volt charging to support dead battery charging
Integrated RTC with calendar and time of day
Ultra-compact, 15-ball DSBGA package (YAH)

Fully integrated battery fuel gauge, linear battery charger, protector, and authenticator
Battery chemistries supported include Li-ion with LCO, NMC, or LFP cathodes
Battery fuel gauging based on patented Dynamic Z-Track technology
- Automatically adjusts for aging, temperature, and rate-induced effects on the battery
Fully featured battery linear charger
- CC/CV charging up to 2A with JEITA-compliant integrated Advanced Charge Algorithm (ACA)
- Dynamic Power Path Management
  - MINSYS mode to ensure system voltage does not drop below target threshold while charging with a weak input
  - SUPPLEMENT mode with ultra fast switching time to ensure system does not brown out during loads while charging
- Ideal diode (ID) mode during discharge to prevent voltage drop to system load
- PACK+ terminal voltage tolerance of +24V with 1kΩ RPACK value
High-accuracy analog front end with two independent ADCs:
- 18-bit low offset delta-sigma ADC for Coulomb counting with ±100mV input range
- 16-bit delta-sigma ADC for cell voltage and internal and external temperature sensors
Programmable safety and protection:
- Hardware-level protections
  - Over Voltage Protection (OVP)
  - Under Voltage Protection (UVP)
  - Over Current Charging (OCC)
  - Over Current Discharging (OCD)
  - Short Circuit Discharging (SCD)
- Firmware-level protections
  - OVP, UVP, OCC, and OCD
  - Under Temperature (UT)
  - Over Temperature (OT)
  - FET Failure (FETF)
  - Charge Timeout (CTO)
ECC ECDSA authentication support with secure memory
True zero-volt charging to support dead battery charging
Integrated RTC with calendar and time of day
Ultra-compact, 15-ball DSBGA package (YAH)

The Texas Instruments BQ27Z855 Dynamic Z-Trackgas gauge solution is a fully integrated, accurate 1-series cell gas gauge, JEITA-compliant linear battery charger, protection, and authentication solution.

The BQ27Z855 gas gauge communicates through an I2C compatible interface and combines an ultra-low power ARM M0 RISC processor, high accuracy analog measurement capabilities, integrated flash memory, high-side NMOS FET drivers, and ECC ECDSA authentication to provide a complete, high-performance battery management solution.

The Texas Instruments BQ27Z855 Dynamic Z-Trackgas gauge solution is a fully integrated, accurate 1-series cell gas gauge, JEITA-compliant linear battery charger, protection, and authentication solution.

The BQ27Z855 gas gauge communicates through an I2C compatible interface and combines an ultra-low power ARM M0 RISC processor, high accuracy analog measurement capabilities, integrated flash memory, high-side NMOS FET drivers, and ECC ECDSA authentication to provide a complete, high-performance battery management solution.

filter

Buscar otro/a Medidores de carga de baterías

No hay detalles disponibles para este producto.

open-in-new

Buscar otro/a Medidores de carga de baterías

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 5

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Guía del usuario	BQ27Z855 Technical Reference Manual (Rev. A)	PDF \| HTML	21/07/2026
	Nota sobre la aplicación	Dynamic Z-Track™ Technology: An Advanced Battery Gauging Algorithm for Dynamic Load Applications (Rev. A)	PDF \| HTML	15/07/2025
	Nota sobre la aplicación	Implementation of Elliptic Curve Cryptography Authentication on TI Battery Fuel Gauges	PDF \| HTML	28/05/2025
	Nota sobre la aplicación	How to Create and Program Authentication Keys into TI Battery Fuel Gauges	PDF \| HTML	5/03/2025
	Nota sobre la aplicación	Battery Gauging Algorithm Comparison	PDF \| HTML	4/12/2023

BQ27Z855

Indicador batería c/cargador lineal integrado, protección y autentic. p/paquetes de 1 celda

BQ27Z855

Detalles del producto

Documentación técnica

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Videos