主页 音频、触觉与压电 音频放大器 扬声器、电视和条形音频放大器
主页
音频、触觉与压电
音频放大器
扬声器、电视和条形音频放大器

TAS5802

正在供货

20W stereo, 40W mono, digital-input high-efficiency Class-D audio amplifier

立即订购
数据表

TAS5802

正在供货
数据表 立即订购

产品详情

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 22 Power stage supply (max) (V) 20 Power stage supply (min) (V) 4.5 RDS(on) (Ω) 0.12 THD + N at 1 kHz (%) 0.06 Load (min) (Ω) 4 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 20 Rating Catalog Operating temperature range (°C) to
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 22 Power stage supply (max) (V) 20 Power stage supply (min) (V) 4.5 RDS(on) (Ω) 0.12 THD + N at 1 kHz (%) 0.06 Load (min) (Ω) 4 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 20 Rating Catalog Operating temperature range (°C) to
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Supports multiple output configurations
    • 2 × 22.7W, BTL mode(8Ω, 20V, THD+N=1%)
    • 2 × 28W, BTL mode(6Ω, 20V, THD+N=1%)
  • Excellent audio performance:
    • 65uVrms Idle noise (typical)
    • THD+N ≤ 0.06% at 1W, 1kHz, PVDD = 12V
    • SNR ≥ 108dB (A-weighted)
  • High-efficiency class-D and better thermal performance:
    • > 90% Power efficiency, 120mΩ RDS(on)
  • Flexible audio I/O:
    • I2S, LJ, RJ, TDM
    • Supports 32, 44.1, 48, 88.2, 96kHz sample rates
    • SDOUT for Audio monitoring, sub-channel, echo cancellation
    • Supports stereo bridge-tied (BTL)
  • Enhanced audio processing
    • Multi-band advanced DRC+AGL
    • 2×15 BQs with smart EQ
    • Dynamic EQ and smart bass
    • DC Blocking
  • Excellent power consumption profile:
    • Non-latching over-current error (OCE)
    • Enhanced over-temperature protection
      • Over-temperature warn (OTW)
      • Over-temperature error (OTE)
    • Under/over-voltage lock-out (UVLO/OVLO)
  • Easy system integration
    • Flexible control strategy
      • Software control (full features)
    • Reduced solution size
      • Fewer passives required compare with open loop devices
      • Inductor-less operation (ferrite bead) for most cases where PVDD ≤ 12V
  • Supports multiple output configurations
    • 2 × 22.7W, BTL mode(8Ω, 20V, THD+N=1%)
    • 2 × 28W, BTL mode(6Ω, 20V, THD+N=1%)
  • Excellent audio performance:
    • 65uVrms Idle noise (typical)
    • THD+N ≤ 0.06% at 1W, 1kHz, PVDD = 12V
    • SNR ≥ 108dB (A-weighted)
  • High-efficiency class-D and better thermal performance:
    • > 90% Power efficiency, 120mΩ RDS(on)
  • Flexible audio I/O:
    • I2S, LJ, RJ, TDM
    • Supports 32, 44.1, 48, 88.2, 96kHz sample rates
    • SDOUT for Audio monitoring, sub-channel, echo cancellation
    • Supports stereo bridge-tied (BTL)
  • Enhanced audio processing
    • Multi-band advanced DRC+AGL
    • 2×15 BQs with smart EQ
    • Dynamic EQ and smart bass
    • DC Blocking
  • Excellent power consumption profile:
    • Non-latching over-current error (OCE)
    • Enhanced over-temperature protection
      • Over-temperature warn (OTW)
      • Over-temperature error (OTE)
    • Under/over-voltage lock-out (UVLO/OVLO)
  • Easy system integration
    • Flexible control strategy
      • Software control (full features)
    • Reduced solution size
      • Fewer passives required compare with open loop devices
      • Inductor-less operation (ferrite bead) for most cases where PVDD ≤ 12V

The TAS5802 is a 2×22 W digital input Class-D audio amplifier for driving loudspeakers used in consumer, commercial, and industrial electronics. The device is highly flexible, allowing operation with a range of control methods, power supply configurations, and audio I/O arrangements.

The TAS5802 high-performance closed-loop architecture and wide-switching frequency range reduce the solution size by reducing passive components and eliminating the inductor + capacitor (LC) filters in most applications. Advanced electromagnetic interference (EMI) reduction techniques allow excellent electromagnetic compliance (EMC) performance, even when used with ferrite bead + capacitor (BC) filters. Several power consumption methods have been implemented to minimize idle power consumption (IPC).

The TAS5802 is a 2×22 W digital input Class-D audio amplifier for driving loudspeakers used in consumer, commercial, and industrial electronics. The device is highly flexible, allowing operation with a range of control methods, power supply configurations, and audio I/O arrangements.

The TAS5802 high-performance closed-loop architecture and wide-switching frequency range reduce the solution size by reducing passive components and eliminating the inductor + capacitor (LC) filters in most applications. Advanced electromagnetic interference (EMI) reduction techniques allow excellent electromagnetic compliance (EMC) performance, even when used with ferrite bead + capacitor (BC) filters. Several power consumption methods have been implemented to minimize idle power consumption (IPC).
filter 查找其他 扬声器、电视和条形音频放大器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 3
类型 标题 下载最新的英语版本 日期
* 数据表 TAS5802 22W Stereo, Inductor-Less, Digital Input, Closed-Loop Class-D Audio Amplifier with 96Khz Extended Processing and Low Idle Power Dissipation 数据表 (Rev. A) PDF | HTML 2025年 8月 12日
用户指南 TAS5815 和 TAS5802 处理流程 PDF | HTML 英语版 PDF | HTML 2025年 1月 24日
证书 TAS5802PWPEVM EU RoHS Declaration of Conformity (DoC) 2024年 11月 12日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

支持软件

TAS5802-SW — TAS5802 PurePath™ Console 3 files

TAS5802 PurePath™ Console 3 files
支持的产品和硬件

支持的产品和硬件

产品
Speaker, TV & soundbar audio amplifiers
TAS5802 — 20W stereo, 40W mono, digital-input high-efficiency Class-D audio amplifier
发送申请
模拟工具

PSPICE-FOR-TI — PSpice® for TI 设计和仿真工具

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 CAD 符号、封装和 3D 模型
HTSSOP (PWP) 28 Ultra Librarian
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频