LM5168E
- Functional Safety-Capable
- Designed for reliability in rugged applications
- 6V to 115V wide input voltage range
- –55°C to +150°C junction temperature range
- Fixed 3ms internal soft-start timer
- Peak and valley current-limit protection
- Input UVLO and thermal shutdown protection
- Designed for scalable industrial power supplies and battery packs
- Integration reduces design size and cost
- COT mode control architecture
- Integrated 1.9Ω NFET buck switch
- Integrated 0.71Ω NFET synchronous rectifier
- 1.2V internal voltage reference
- No loop compensation components
- Internal VCC bias regulator and boot diode
- Open-drain power-good indicator
- Package: SOIC PowerPAD™-8 integrated circuit package with 1.27mm pin spacing
The LM5168E is an extended temperature range, (–55°C to +150°C) synchronous buck converter designed to regulate over a wide input voltage range, minimizing the need for external surge suppression components. A minimum controllable on time of 50ns facilitates large step-down conversion ratios, enabling the direct step-down from a 48V nominal input to low-voltage rails for reduced system complexity and design cost. The LM5168E operates during input voltage dips as low as 6V, at nearly 100% duty cycle if needed, making the device an excellent choice for wide input supply range industrial and high cell count battery pack applications.
With integrated high-side and low-side power MOSFETs, the LM5168E delivers up to 0.3A of output current. A constant on-time (COT) control architecture provides nearly constant switching frequency with excellent load and line transient response. The LM5168E is available in the auto mode version, which enables ultra-low IQ and diode emulation mode operation for high light-load efficiency.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | LM5168E 115V, 0.3A, Synchronous Buck Converter 数据表 | PDF | HTML | 2025年 8月 26日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
LM5168FEVM — LM5168 115V Fly-Buck 稳压器评估模块
LM5168PEVM — LM5168P 115V 直流/直流降压稳压器评估模块
LM5168P 评估模块 (EVM) 是一款 115V 直流/直流降压稳压器,采用同步整流实现小尺寸、高转换效率。该 EVM 在 20V 至 115V(最大绝对电压为 120V)的宽输入电压范围内工作,能够在高达 0.3A 的电流下以 500kHz 开关频率提供 12V 稳压输出。输出电压具有优于 1.5% 的设定点精度,可使用外部电阻分压器进行调节。模块设计采用 LM5168P 同步降压转换器,支持宽输入电压范围、宽占空比范围、集成高侧和低侧功率 MOSFET、高级过流保护和精密使能。
封装 | 引脚 | CAD 符号、封装和 3D 模型 |
---|---|---|
HSOIC (DDA) | 8 | Ultra Librarian |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点