All trademarks are the property of their respective owners. TRI-STATE is a trademark of Texas Instruments. TRI-STATE is a trademark of Texas Instruments.
The DS90C363 transmitter converts 21 bits of CMOS/TTL data into three LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fourth LVDS link. Every cycle of the transmit clock 21 bits of input data are sampled and transmitted. The DS90CF364 receiver converts the LVDS data streams back into 21 bits of CMOS/TTL data. At a transmit clock frequency of 65 MHz, 18 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are transmitted at a rate of 455 Mbps per LVDS data channel. Using a 65 MHz clock, the data throughput is 170 Mbyte/sec. The Transmitter is offered with programmable edge data strobes for convenient interface with a variety of graphics controllers. The Transmitter can be programmed for Rising edge strobe or Falling edge strobe through a dedicated pin. A Rising edge Transmitter will inter-operate with a Falling edge Receiver (DS90CF364) without any translation logic.
This chipset is an ideal means to solve EMI and cable size problems associated with wide, high speed TTL interfaces.
| Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | DS90C363/F364 3.3V Prog LVDS Trnsmit 18Bit FPD 65MHz/LVDS Rcvr 18Bit FPD 85MHz datasheet (Rev. C) | 12 Apr 2013 | |
| Application note | High-Speed Layout Guidelines for Reducing EMI for LVDS SerDes Designs | 09 Nov 2018 | ||
| Application note | How to Map RGB Signals to LVDS/OpenLDI(OLDI) Displays (Rev. A) | 29 Jun 2018 | ||
| Application note | AN-1032 An Introduction to FPD-Link (Rev. C) | 08 Aug 2017 | ||
| Application note | Receiver Skew Margin for Channel Link I and FPD Link I Devices | 13 Jan 2016 | ||
| Application note | TFT Data Mapping for Dual Pixel LDI Application - Alternate A - Color Map | 15 May 2004 | ||
| Application note | AN-1056 STN Application Using FPD-Link | 14 May 2004 | ||
| Application note | AN-1085 FPD-Link PCB and Interconnect Design-In Guidelines | 14 May 2004 |
For additional terms or required resources, click any title below to view the detail page where available.
The FPD-Link evaluation kit includes a transmitter (Tx) board, a receiver (Rx) board and interfacing cables. This kit shows the chipsets interfacing from test equipment or a graphics controller using low-voltage differential signaling (LVDS) to a receiver board.
The transmitter board accepts (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| TSSOP (DGG) | 48 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.