All trademarks are the property of their respective owners.
The ADC08D1500 is a dual, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sample rates up to 1.7 GSPS. Consuming a typical 1.8 Watts at 1.5 GSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.25 ENOB with a 748 MHz input signal and a 1.5 GHz sample rate while providing a 10-18 C.E.R. Output formatting is binary and the LVDS digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.2V.
Each converter has a 1:2 demultiplexer that feeds two LVDS buses and reduces the output data rate on each bus to half the sample rate. The two converters can be interleaved and used as a single 3 GSPS ADC.
The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad HLQFP and operates over the Industrial (-40°C ≤ TA ≤ +85°C) temperature range.
| Top documentation | Type | Title | Format options | Date |
|---|---|---|---|---|
| * | Data sheet | ADC08D1500 High Performance, Low Power, Dual 8-Bit, 1.5 GSPS A/D Converter datasheet (Rev. G) | Apr 18, 2013 | |
| Application note | AN-1558 Clocking High-Speed A/D Converters (Rev. B) | May 1, 2013 | ||
| Application note | Generating Precision Clocks for Time- Interleaved ADCs | Aug 2, 2007 | ||
| White paper | High-Performance Analog Front Ends | Jan 1, 2006 | ||
| Application note | Understanding High-Speed Signals, Clocks, and Data Capture | Oct 18, 2005 | ||
| Application note | Send High-Speed ADC Data Remotely And Quietly Using LVDS | Mar 27, 2003 |
For additional terms or required resources, click any title below to view the detail page where available.
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| HLQFP (NNB) | 128 | Ultra Librarian |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.