Home
Design & development

TMAG5328EVM

TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch

Order now

TMAG5328EVM

Order now

Overview

The evaluation module (EVM) is an easy-to-use platform to evaluate the main features and performance of the TMAG5328 device, which is a resistor-adjustable, low-power Hall-effect switch. This EVM includes a magnet and a TMAG5328 daughter board. Also included is a head-on linear displacement module for a demonstration of the head-on linear displacement function.

Features
  • GUI-controlled DAC option for dynamically setting the internal magnetic threshold sensitivity (BOP)
  • Nonvolatile memory within DAC stores BOP for future operation without a processor
  • Potentiometer option for dynamically setting BOP
  • Resistor footprint for creating a static BOP
  • LED on TMAG5328 output for visual inspection of switch’s output state
  • Head-on linear displacement module for a demonstration of the head-on linear displacement function

  • TMAG5328 daughter board
  • 1/2-inch diameter x 1/8-inch thick, N42 diametric magnet
  • 3D-printed head-on linear displacement module
Hall-effect latches & switches
TMAG5328 — Resistor-adjustable, low-power Hall-effect switch
Download View video with transcript Video

Get started

  1. Order this EVM.
  2. If the GUI is needed, order the TI-SCB.
  3. Select and order desired magnetic attachment: SLIDEBY-MAG-ACC, HEADON-MAG-ACC, JOYSTICK-MAG-ACC, or ROTATEPUSH-MAG-ACC.
  4. Download EVM user’s guide, and if necessary, the magnetic attachment user’s manual.
  5. Connect the magnetic attachment to the EVM.
  6. If the TI-SCB is used for PC GUI communication:
    • Connect the TI-SCB to the EVM.
    • Connect a USB cable from the TI-SCB to a PC.
    • Run the EVM GUI software (GUI link is provided in the EVM user’s guide).
    • View the EVM user guide instructions on how to flash the TI-SCB with the appropriate firmware
  7. Configure device as necessary.
  8. Take measurements.

Order & start development

Explore packages of hardware, software and documentation

HARDWARE AND SOFTWARE PACKAGE

Evaluate with TMAG5328

View package

Evaluate with TMAG5328

close
Set device's switching point using the hardware, GUI and documentation to evaluate TMAG5328.
Evaluation board

TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch

Required
Why do I need this? This evaluation module lets you use set the switching point of the TMAG5328 and observe the device's output.
Supported products & hardware
In stock
Limit:
Out of stock on TI.com
Not available on TI.com

TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch

close
Version: null
Release date:
open-in-new

View all versions

Evaluation board

TI-SCB — Sensor control board (SCB) for evaluation modules

Required if
Enabling DAC programming and data capture over USB connection.
Why do I need this? The TI Sensor Control board interfaces with the GUI for this evaluation module to simplify device configuration and data visualization.
Supported products & hardware

Supported products & hardware

Hardware development
Evaluation board
HEADON-MAG-ACC — Head-on attachment accessory for magnetic sensing evaluation modules INA700EVM — INA700 evaluation module for EZShunt™ Digital Power Monitor with built in shunt resistor JOYSTICK-MAG-ACC — Joystick magnetic accessory for magnetic sensing evaluation modules (EVMs) LDC-HALL-HMI-EVM — Evaluation module for inductive touch and magnetic dial contactless user-interface design TMAG3001EVM — TMAG3001 evaluation module for three-axis linear Hall-effect sensor with I²C and programmable switch TMAG6180-6181EVM — TMAG6180 and TMAG6181 evaluation module with differential sine and cosine analog outputs
In stock
Limit:
Out of stock on TI.com
Not available on TI.com

TI-SCB — Sensor control board (SCB) for evaluation modules

close
Version: null
Release date:
open-in-new

View all versions

Hardware development
Evaluation board
HEADON-MAG-ACC — Head-on attachment accessory for magnetic sensing evaluation modules INA700EVM — INA700 evaluation module for EZShunt™ Digital Power Monitor with built in shunt resistor JOYSTICK-MAG-ACC — Joystick magnetic accessory for magnetic sensing evaluation modules (EVMs) LDC-HALL-HMI-EVM — Evaluation module for inductive touch and magnetic dial contactless user-interface design TMAG3001EVM — TMAG3001 evaluation module for three-axis linear Hall-effect sensor with I²C and programmable switch TMAG6180-6181EVM — TMAG6180 and TMAG6181 evaluation module with differential sine and cosine analog outputs
Support software

SBAC253 — PAMB Windows USB Drivers

Required if
Enabling PC communication with the TI-SCB.
Why do I need this? This software package has the PC drivers required for PC communication.
Supported products & hardware

Supported products & hardware

Hardware development
Evaluation board
ADS1015EVM-PDK — ADS1015 12-bit, 3.3-kSPS, 4-channel, delta-sigma ADC evaluation module performance demonstration kit ADS1018EVM — ADS1018 12-bit, 3.3-kSPS 4-channel, delta-sigma ADC evaluation module ADS1115EVM-PDK — ADS1115 evaluation module for 16-bit, 860-SPS four-channel delta-sigma ADC ADS1118EVM — ADS1118 16-bit, 860-SPS, 4-channel, delta-sigma ADC evaluation module ADS1148EVM-PDK — ADS1148 performance demonstration kit for 16-bit 2-kSPS ADC with PGA for sensor measurement ADS1248EVM-PDK — ADS1248 performance demonstration kit for 24-bit, 2-kSPS, eight-channel delta-sigma ADC ADS7038Q1EVM-PDK — ADS7038-Q1 8-channel, 1-MSPS, 12-bit ADC evaluation module performance demonstration kit (PDK) ADS7066EVM-PDK — ADS7066 performance demonstration kit for eight-channel, 250-kSPS, 16-bit, internal-reference ADC BOOSTXL-ADS7142-Q1 — ADS7142-Q1 2-channel 12-bit 140-kSPS I2C-compatible ADC BoosterPack™ plug-in module INA219EVM — INA219 evaluation module INA220EVM — INA220 evaluation module for 26-V, 12-bit, I²C output digital power monitor INA226EVM — INA226 Evaluation Module INA228_237_238EVM — INA228, INA237 & INA238 evaluation module INA229_239EVM — INA229 & INA239 evaluation module INA230EVM — INA230 evaluation module for 36-V, 16-bit, I²C output digital power monitor with alert INA231EVM — INA231 evaluation module INA234_236EVM — INA232, INA234 and INA236 evaluation module for current/voltage/power monitors INA260EVM — High Precision Current Shunt Monitor Evaluation Module INA423XEVM — INA4230 and INA4235 evaluation module INA700EVM — INA700 evaluation module for EZShunt™ Digital Power Monitor with built in shunt resistor INA740-INA741EVM — INA740 and INA741 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor INA745-INA746EVM — INA745 and INA746 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor INA780-INA781EVM — INA780 and INA781 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor TI-SCB — Sensor control board (SCB) for evaluation modules TLA2024EVM-PDK — TLA2024 12-bit, 4-channel, delta-sigma ADC with VREF, oscillator, PGA and I2C evaluation module TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface
Download options

SBAC253 — PAMB Windows USB Drivers

close
Version: 4.2.0.0
Release date: Sep 24, 2024
open-in-new

View all versions

lock

PAMB_USB_Driver_Installer-v4.2.0.0.exe  — 15738 K

Drivers Installer

SHA-256 checksum
lock = Requires export approval (1 minute)
Hardware development
Evaluation board
ADS1015EVM-PDK — ADS1015 12-bit, 3.3-kSPS, 4-channel, delta-sigma ADC evaluation module performance demonstration kit ADS1018EVM — ADS1018 12-bit, 3.3-kSPS 4-channel, delta-sigma ADC evaluation module ADS1115EVM-PDK — ADS1115 evaluation module for 16-bit, 860-SPS four-channel delta-sigma ADC ADS1118EVM — ADS1118 16-bit, 860-SPS, 4-channel, delta-sigma ADC evaluation module ADS1148EVM-PDK — ADS1148 performance demonstration kit for 16-bit 2-kSPS ADC with PGA for sensor measurement ADS1248EVM-PDK — ADS1248 performance demonstration kit for 24-bit, 2-kSPS, eight-channel delta-sigma ADC ADS7038Q1EVM-PDK — ADS7038-Q1 8-channel, 1-MSPS, 12-bit ADC evaluation module performance demonstration kit (PDK) ADS7066EVM-PDK — ADS7066 performance demonstration kit for eight-channel, 250-kSPS, 16-bit, internal-reference ADC BOOSTXL-ADS7142-Q1 — ADS7142-Q1 2-channel 12-bit 140-kSPS I2C-compatible ADC BoosterPack™ plug-in module INA219EVM — INA219 evaluation module INA220EVM — INA220 evaluation module for 26-V, 12-bit, I²C output digital power monitor INA226EVM — INA226 Evaluation Module INA228_237_238EVM — INA228, INA237 & INA238 evaluation module INA229_239EVM — INA229 & INA239 evaluation module INA230EVM — INA230 evaluation module for 36-V, 16-bit, I²C output digital power monitor with alert INA231EVM — INA231 evaluation module INA234_236EVM — INA232, INA234 and INA236 evaluation module for current/voltage/power monitors INA260EVM — High Precision Current Shunt Monitor Evaluation Module INA423XEVM — INA4230 and INA4235 evaluation module INA700EVM — INA700 evaluation module for EZShunt™ Digital Power Monitor with built in shunt resistor INA740-INA741EVM — INA740 and INA741 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor INA745-INA746EVM — INA745 and INA746 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor INA780-INA781EVM — INA780 and INA781 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor TI-SCB — Sensor control board (SCB) for evaluation modules TLA2024EVM-PDK — TLA2024 12-bit, 4-channel, delta-sigma ADC with VREF, oscillator, PGA and I2C evaluation module TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface

Release Information

The design resource accessed as www.ti.com/lit/zip/sbac253 or www.ti.com/lit/xx/sbac253a/sbac253a.zip has been migrated to a new user experience at www.ti.com/tool/download/SBAC253. Please update any bookmarks accordingly.
Support software

SBAC297 — TMAG5328EVM BSL Batch File

Required if
Enabling EVM communication with the TI-SCB.
Why do I need this? This firmware must be loaded onto the TI-SCB for the TI-SCB to communicate with the TMAG5328EVM.
Supported products & hardware

Supported products & hardware

Hardware development
Evaluation board
TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch
Download options

SBAC297 — TMAG5328EVM BSL Batch File

close
Version: 01.00.00.0A
Release date: Mar 21, 2022
open-in-new

View all versions

download

TMAG5328EVM BSL Batch File (zip)  — 566 K

SHA-256 checksum
Hardware development
Evaluation board
TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch

Release Information

The design resource accessed as www.ti.com/lit/zip/sbac297 or www.ti.com/lit/xx/sbac297a/sbac297a.zip has been migrated to a new user experience at www.ti.com/tool/download/SBAC297. Please update any bookmarks accordingly.
GUI for evaluation module (EVM)

TMAG5328EVM-GUI — TMAG5328EVM GUI

Required if
Enabling device configuration and data capture over USB connection.
Why do I need this? The GUI enables programming the DAC and observing a graph of the TMAG5328's output.
Supported products & hardware

Supported products & hardware

Hardware development
Evaluation board
TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch

TMAG5328EVM-GUI — TMAG5328EVM GUI

close
Version: null
Release date: Aug 23, 2024
open-in-new

View all versions

Hardware development
Evaluation board
TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch
Documentation & related resources

Order this hardware only

Evaluation board

TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch

Supported products & hardware
In stock
Limit:
Out of stock on TI.com
Not available on TI.com

TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch

close
Version: null
Release date:
open-in-new

View all versions

TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* EVM User's guide TMAG5328 Evaluation Module User's Guide (Rev. A) PDF | HTML Jan 25, 2024
User guide HEADON-MAG-ACC (Rev. A) PDF | HTML Dec 11, 2024
Application brief Head-on Linear Displacement Sensing Using Hall-Effect Sensors (Rev. A) PDF | HTML May 22, 2024
Certificate TMAG5328EVM EU RoHS Declaration of Conformity (DoC) Aug 9, 2021

Related design resources

Hardware development

EVALUATION BOARD
TI-SCB — Sensor control board (SCB) for evaluation modules

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support.

Videos