Home
Design & development

DRV2605EVM-CT

DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

Order now

DRV2605EVM-CT

Order now

Overview

The DRV2605 is a haptic driver designed for Linear Resonant Actuators (LRA) and Eccentric Rotating Mass (ERM) motors. It provides many features which help eliminate the design complexities of haptic motor control including reduced solution size, high efficiency output drive, closed-loop motor control, quick device startup, and auto-resonance frequency tracking.

The DRV2605EVM-CT Evaluation Module (EVM) is a complete demo and evaluation platform for the DRV2605. The kit includes a microcontroller, linear actuator, eccentric rotating mass motor, sample waveforms and capacitive touch buttons which can be used to completely demonstrate and evaluate the DRV2605.

Features
  • Smart Loop Architecture
    •    
  • Automatic Overdrive & Braking (ERM/LRA)
    •    
  • Automatic Resonance Tracking (LRA)
    •    
  • Automatic Actuator Diagnostics (ERM/LRA)
    •    
  • Automatic Calibration (ERM/LRA)
  • I2C Digital Playback Engine
  • 123 Effect Haptic Waveform Library
  • Audio-to-Haptics
  • ERM & LRA Actuator
  • Capacitive Touch Buttons
  • Programmable MSP430
    •
    Haptics drivers
    DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking

     

    MSP430 microcontrollers
    MSP430TCH5E — 16 MHz MCU with 16KB Flash, 512B SRAM, haptics-enabled, capacitive touch, 10-bit ADC, UART/SPI/I2
    Download View video with transcript Video

    Order & start development

    Explore packages of hardware, software and documentation

    HARDWARE AND SOFTWARE PACKAGE

    Develop with DRV2605

    View package

    Develop with DRV2605

    close
    See hardware, software, and design resources for evaluating the DRV2605 Haptic driver for ERM/LRA.
    Evaluation board

    DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

    Required
    Why do I need this? This complete reference design for the DRV2605/L ERM and LRA haptics driver has Smart Loop Algorithm, RAM for waveform storage, and adds extended actuator support for ERMs and LRAs.
    Supported products & hardware

    Supported products & hardware

    Hardware development
    Reference design
    TIDA-HAPTIC-MOTOR-CONTROL-REFERENCE-DESIGN — Advanced haptic driver simplifies tactile feedback design in consumer and industrial
    In stock
    Limit:
    Out of stock on TI.com
    Not available on TI.com

    DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

    close
    Version: null
    Release date:
    open-in-new

    View all versions

    Hardware development
    Reference design
    TIDA-HAPTIC-MOTOR-CONTROL-REFERENCE-DESIGN — Advanced haptic driver simplifies tactile feedback design in consumer and industrial
    Evaluation board

    DRV-ACC16-EVM — Haptic Accelerometer Measurement Tool

    Optional
    Why do I need this? This Haptic Accelerometer Measurement Tool is highly recommended for you to easily measure and characterize haptic feedback, acceleration and vibration strength.
    Supported products & hardware
    In stock
    Limit:
    Out of stock on TI.com
    Not available on TI.com

    DRV-ACC16-EVM — Haptic Accelerometer Measurement Tool

    close
    Version: null
    Release date:
    open-in-new

    View all versions

    Evaluation board

    USB2ANY —

    USB2ANY interface adapter

    Required if
    Using EVM module.
    Why do I need this? The USB2ANY interface adapter is a tool intended to allow a computer to control an evaluation module (EVM) via a USB connection.
    Supported products & hardware

    Supported products & hardware

    Hardware development
    Reference design
    TIDA-050047 — Integrated USB Type-C®, USB Power Delivery and charging reference design for 2–4 cell batteries
    Daughter card
    TPS23881B1EVM-024 — TPS23881B daughter card
    Evaluation board
    TPSM8287A06BASEVM — TPSM8287A06 evaluation module for parallelable, I²C interface, remote sense 6A step-down mod ULC1001-DRV290XEVM — ULC1001 and DRV2901 hardware evaluation bundles for ultrasonic lens cleaning (ULC) ULC1001-DRV2911EVM — ULC1001 and DRV2911 evaluation module
    In stock
    Limit:
    Out of stock on TI.com
    Not available on TI.com

    USB2ANY —

    USB2ANY interface adapter

    close
    Version: null
    Release date:
    open-in-new

    View all versions

    Hardware development
    Reference design
    TIDA-050047 — Integrated USB Type-C®, USB Power Delivery and charging reference design for 2–4 cell batteries
    Daughter card
    TPS23881B1EVM-024 — TPS23881B daughter card
    Evaluation board
    TPSM8287A06BASEVM — TPSM8287A06 evaluation module for parallelable, I²C interface, remote sense 6A step-down mod ULC1001-DRV290XEVM — ULC1001 and DRV2901 hardware evaluation bundles for ultrasonic lens cleaning (ULC) ULC1001-DRV2911EVM — ULC1001 and DRV2911 evaluation module
    GUI for evaluation module (EVM)

    HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

    Required
    Why do I need this? This Haptic Control Console is an evaluation and development suite for TI Haptic Drivers to help you setup, control and evaluate the entire device.
    Supported products & hardware

    Supported products & hardware

    Products
    Haptics drivers
    DRV2510-Q1 — Automotive 3A haptic driver for solenoids with integrated diagnostics and load-dump protection DRV2511-Q1 — Automotive 8A haptic driver for solenoids with integrated fault-protection DRV2604 — Haptic driver for ERM/LRA with waveform memory & auto-resonance tracking DRV2604L — Haptic driver for ERM/LRA with 2-V operation, waveform memory & auto-resonance tracking DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking DRV2605L — Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking DRV2624 — Haptic driver for ERM/LRA with waveform memory, auto-resonance tracking, & low power consumption DRV2625 — Haptic driver for ERM/LRA with waveform library, auto-resonance tracking, & low power consumption
    Piezo drivers
    DRV2667 — Haptic driver for piezo with integrated 105-V boost converter, waveform memory & DAC
    Hardware development
    Evaluation board
    DRV-ACC16-EVM — Haptic accelerometer measurement tool DRV2510Q1EVM — DRV2510-Q1 Automotive Haptic Driver for Solenoids with Integrated Diagnostics Evaluation Module DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit DRV2605LEVM-MD — DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback DRV2624EVM-CT — DRV2624 evaluation board with capacitive touch DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics DRV2625EVM-CT — DRV2625 Evaluation Board with Bluetooth and Capacitive Touch DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics DRV2667EVM-CT — DRV2667 evaluation module with boost, digital front end and internal waveform memory LM48560TLEVAL — High Voltage Class H Ceramic Speaker Driver with Automatic Level Control
    Download options

    HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

    close
    Version: 01.00.00.0D
    Release date: Jul 28, 2020
    open-in-new

    View all versions

    lock

    Haptic Control Console v1.6.0.2 (zip)  — 5610 K

    Checksum
    lock = Requires export approval (1 minute)
    Products
    Haptics drivers
    DRV2510-Q1 — Automotive 3A haptic driver for solenoids with integrated diagnostics and load-dump protection DRV2511-Q1 — Automotive 8A haptic driver for solenoids with integrated fault-protection DRV2604 — Haptic driver for ERM/LRA with waveform memory & auto-resonance tracking DRV2604L — Haptic driver for ERM/LRA with 2-V operation, waveform memory & auto-resonance tracking DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking DRV2605L — Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking DRV2624 — Haptic driver for ERM/LRA with waveform memory, auto-resonance tracking, & low power consumption DRV2625 — Haptic driver for ERM/LRA with waveform library, auto-resonance tracking, & low power consumption
    Piezo drivers
    DRV2667 — Haptic driver for piezo with integrated 105-V boost converter, waveform memory & DAC
    Hardware development
    Evaluation board
    DRV-ACC16-EVM — Haptic accelerometer measurement tool DRV2510Q1EVM — DRV2510-Q1 Automotive Haptic Driver for Solenoids with Integrated Diagnostics Evaluation Module DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit DRV2605LEVM-MD — DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback DRV2624EVM-CT — DRV2624 evaluation board with capacitive touch DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics DRV2625EVM-CT — DRV2625 Evaluation Board with Bluetooth and Capacitive Touch DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics DRV2667EVM-CT — DRV2667 evaluation module with boost, digital front end and internal waveform memory LM48560TLEVAL — High Voltage Class H Ceramic Speaker Driver with Automatic Level Control

    Release Information

    The design resource accessed as www.ti.com/lit/zip/sloc332 or www.ti.com/lit/xx/sloc332d/sloc332d.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC332. Please update any bookmarks accordingly.
    Firmware

    SLOC318 — DRV2605EVM-CT Firmware v1.0

    Optional
    Why do I need this? This is the DRV2605EVM-CT firmware.
    Supported products & hardware

    Supported products & hardware

    Products
    Haptics drivers
    DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking
    Hardware development
    Evaluation board
    DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation
    Download options

    SLOC318 — DRV2605EVM-CT Firmware v1.0

    close
    Version: 01.00.00.0A
    Release date: Jan 22, 2018
    open-in-new

    View all versions

    lock

    DRV2605EVM-CT Firmware v1.0 (zip)  — 295 K

    Checksum
    lock = Requires export approval (1 minute)
    Products
    Haptics drivers
    DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking
    Hardware development
    Evaluation board
    DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

    Release Information

    The design resource accessed as www.ti.com/lit/zip/sloc318 or www.ti.com/lit/xx/sloc318a/sloc318a.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC318. Please update any bookmarks accordingly.
    Firmware

    SLOC340 — DRV-USB-COM Board Firmware

    Optional
    Why do I need this? This is the DRV-USB-COM board firmware.
    Supported products & hardware

    Supported products & hardware

    Hardware development
    Evaluation board
    DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics DRV2667EVM-CT — DRV2667 evaluation module with boost, digital front end and internal waveform memory
    Download options

    SLOC340 — DRV-USB-COM Board Firmware

    close
    Version: 01.00.00.00
    Release date: Aug 17, 2016
    open-in-new

    View all versions

    download

    DRV-USB-COM Board Firmware (zip)  — 591 K

    Checksum
    Hardware development
    Evaluation board
    DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics DRV2667EVM-CT — DRV2667 evaluation module with boost, digital front end and internal waveform memory

    Release Information

    The design resource accessed as www.ti.com/lit/zip/sloc340 or www.ti.com/lit/xx/sloc340/sloc340.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC340. Please update any bookmarks accordingly.

    Order this hardware only

    Evaluation board

    DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

    Supported products & hardware

    Supported products & hardware

    Hardware development
    Reference design
    TIDA-HAPTIC-MOTOR-CONTROL-REFERENCE-DESIGN — Advanced haptic driver simplifies tactile feedback design in consumer and industrial
    In stock
    Limit:
    Out of stock on TI.com
    Not available on TI.com

    DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

    close
    Version: null
    Release date:
    open-in-new

    View all versions

    Hardware development
    Reference design
    TIDA-HAPTIC-MOTOR-CONTROL-REFERENCE-DESIGN — Advanced haptic driver simplifies tactile feedback design in consumer and industrial
    TI's Standard Terms and Conditions for Evaluation Items apply.

    Technical documentation

    No results found. Please clear your search and try again.
    View all 9
    Type Title Date
    Application note Benefits of Auto-Resonance Tracking (Rev. A) PDF | HTML Nov 11, 2021
    User guide Haptic Control Console GUI (Rev. B) Oct 14, 2021
    Application note Haptic Energy Consumption (Rev. A) PDF | HTML Sep 28, 2021
    Certificate DRV2605EVM-CT EU Declaration of Conformity (DoC) Jan 2, 2019
    Data sheet DRV2605 Haptic Driver for ERM and LRA With Built-In Library and Smart-Loop Architecture datasheet (Rev. E) PDF | HTML Apr 3, 2018
    Application note DRV2605 Device Setup Guide Jul 9, 2014
    User guide DRV2605 ERM, LRA Haptic Driver Evaluation Kit (Rev. B) Mar 28, 2014
    More literature DRV2605EVM-CT Quick Start Guide Dec 18, 2012
    More literature Haptics: Solutions for ERM and LRA Actuators Dec 18, 2012

    Support & training

    TI E2E™ forums with technical support from TI engineers

    View all forum topics

    Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

    If you have questions about quality, packaging or ordering TI products, see TI support.

    Videos