SLVUDJ1 January   2026

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
      1. 1.4.1 TPS7N59
      2. 1.4.2 LMG1020 Low Side Driver
  6. 2Hardware
    1. 2.1 EVM Setup
      1. 2.1.1 LDO Input/Output Connector Descriptions
        1. 2.1.1.1 VIN and GND
        2. 2.1.1.2 BIAS and GND
        3. 2.1.1.3 VOUT and GND
        4. 2.1.1.4 EN
      2. 2.1.2 Optional Load Transient Input/Output Connector Descriptions
        1. 2.1.2.1 VDD and GND
        2. 2.1.2.2 J12
        3. 2.1.2.3 J14
        4. 2.1.2.4 J16
        5. 2.1.2.5 J13
        6. 2.1.2.6 J17
      3. 2.1.3 TPS7N59 LDO Operation
      4. 2.1.4 Optional Load Transient Circuit Operation
      5. 2.1.5 Inputs/Outputs Connectors and Jumper Descriptions
        1. 2.1.5.1 J20, J22 – IN
        2. 2.1.5.2 J8 – OUT
        3. 2.1.5.3 TP1 – REF
        4. 2.1.5.4 TP2 – PG
        5. 2.1.5.5 TP3 – NR/SS
        6. 2.1.5.6 TP4, TP5, TP6 – GND
      6. 2.1.6 Soldering Guidelines
      7. 2.1.7 Equipment Connections
  7. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials (BOM)
EVM User's Guide

TPS7N59EVM-184 Evaluation Module