• Menu
  • Product
  • Email
  • PDF
  • Order now
  • TPSI31xx-Q1 Evaluation Module

    • SLVUCU9 November   2023 TPSI3100-Q1

       

  • CONTENTS
  • SEARCH
  • TPSI31xx-Q1 Evaluation Module
  1.   1
  2.   Description
  3.   3
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Header Information
    3. 2.3 Jumper Information
    4. 2.4 Test Points
  9. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  10. 4Additional Information
    1. 4.1 Trademarks
  11. IMPORTANT NOTICE
search No matches found.
  • Full reading width
    • Full reading width
    • Comfortable reading width
    • Expanded reading width
  • Card for each section
  • Card with all content

 

EVM User's Guide

TPSI31xx-Q1 Evaluation Module

Description

TPSI31xx-Q1 evaluation module (EVM) helps designers evaluate the operation and performance of the TPSI31xx-Q1 device family. The board features the TPSI3100-Q1, an isolated switch driver with integrated 15.8-V gate supply and fault/alarm indicators. The TPSI3100-Q1 is a 5-kVRMS reinforced isolated switch driver with 1.5-A peak source current and 3-A peak sink current. The device is able to generate a regulated secondary 15.8-V power supply, which allows for a wide selection of power switches such as MOSFETs, SiC MOSFETs, and IGBTs. The EVM features a current sense amplifier (INA181) and is intended for overcurrent protection with two-level detection (5-A alarm, 10-A fault). The EVM also includes an N-Channel 750-V 44-A silicon carbide (SiC) MOSFET in a TO-263-7L package. The board contains multiple test points to monitor TPSI3100-Q1 functionality. In addition, the EVM contains an adjustable 5-V LDO to support battery powering.

Features

  • Overcurrent protection with 2-level detection (5-A alarm, 10-A fault)
  • Current sense amplifier (INA181-Q1) for precise load detection
  • Ultralow-noise LDO (5-V to 20-V input) for powering the circuit if adjustable power supply is unavailable
  • Drives external power transistors, including placeholders for common through-hole and surface-mount footprints
  • No isolated secondary supply required
  • 5-kVRMS reinforced isolation
  • 15.8-V gate drive with 1.5-A peak source current and 3-A peak sink current
  • Up to 25-mW, 5-V supply for external auxiliary circuitry
  • Dual isolated high-speed comparators with integrated voltage reference +/-1.5%
  • Open-drain outputs for fault and alarm indicators

 

Texas Instruments

© Copyright 1995-2025 Texas Instruments Incorporated. All rights reserved.
Submit documentation feedback | IMPORTANT NOTICE | Trademarks | Privacy policy | Cookie policy | Terms of use | Terms of sale