The TPS1HTC30EVM is a hardware evaluation module (EVM) used to enable hardware engineers to evaluate the full performance and functionality of the TPS1HTC30-Q1 automotive high side switch. This evaluation board provides a seamless way to connect a power supply to the input of the TPS1HTC30-Q1, connect a load to the output channel, and switch on and off the device using the control pins of the chip itself. The device integrates protection features such as thermal shut down, output clamp, and current limit.

• Standalone operation with standard bench equipment
• Wide operating voltage range: 6 V to 48 V
• 64 V DC tolerance when disabled
• Low RON : 30 mΩ typ, 55 mΩ max
• Potentiometer for SNS resistor, allowing for easy configuration of external resistance values
• Improve system level reliability through adjustable current limiting – Current Limit 2A-16A • Accurate Current Sensing – ±4% at 1 A in standard mode
• Integrated inductive discharge clamp >65 V
• Low standby current of <0.5 μA
• Low quiescent current (Iq) of < 2 mA
• Functional safety capable
• Operating junction temperature, –40 to 125°C
• Input control, 1.8-V, 3.3-V and 5-V logic compatible
• Integrated fault sense voltage scaling for ADC protection
• Open-load detection in off-state
• Thermal shutdown/swing detection
• 14-Pin Thermally-enhanced TSSOP package