• Menu
  • Product
  • Email
  • PDF
  • Order now

  • INA700-701EVM Evaluation Module

    • SBOU285A April   2023  – July 2025 INA700

       

  • CONTENTS
  • SEARCH
  • INA700-701EVM Evaluation Module
  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Quick Start Setup
    2. 2.2 EVM Operation
      1. 2.2.1 Current Sensing Operation
        1. 2.2.1.1 Detailed Setup
    3. 2.3 Circuitry
      1. 2.3.1 Current Sensing IC
      2. 2.3.2 Input Signal Path
      3. 2.3.3 Digital Circuitry
    4. 2.4 PAMB Compatibility
  8. 3Software
    1. 3.1 Setup
      1. 3.1.1 Driver Installation
      2. 3.1.2 Firmware
        1. 3.1.2.1 Firmware Debug
      3. 3.1.3 GUI Setup and Connection
        1. 3.1.3.1 Initial Setup
        2. 3.1.3.2 GUI to EVM Connection
    2. 3.2 GUI Operation
      1. 3.2.1 Homepage Tab
      2. 3.2.2 Registers Tab
      3. 3.2.3 Results Data Tab
    3. 3.3 Direct EVM USB Communication
      1. 3.3.1 Standard USB Read and Write Operations
      2. 3.3.2 Collect Data Through the USB BULK Channel
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  10. 5Additional Information
    1. 5.1 Trademarks
  11. 6Related Documentation
  12. 7Revision History
  13. IMPORTANT NOTICE
search No matches found.
  • Full reading width
    • Full reading width
    • Comfortable reading width
    • Expanded reading width
  • Card for each section
  • Card with all content

 

EVM User's Guide

INA700-701EVM Evaluation Module

Description

The INA700-701EVM is an easy-to-use platform that can evaluate the main features and performance of the INA700 or INA701 device. The evaluation module (EVM) comes with graphical user interface (GUI) support to read and write to device registers.

Get Started

  1. Buy the INA700 or INA701 Evaluation Module.
  2. Buy the TI-SCB sensor control board (SCB).
  3. Download and install the PAMB Windows USB Drivers.
  4. Read this user's guide to set up the hardware.
  5. Run the EZShunt-EVM-GUI.

Features

  • GUI support to read and write device registers as well as view and save results data
  • EVM detached from SCB for custom use cases
  • Multiple EVM support with single SCB or GUI
  • Conveniently powered from a common micro-USB connector through the SCB

 
Texas Instruments

© Copyright 1995-2025 Texas Instruments Incorporated. All rights reserved.
Submit documentation feedback | IMPORTANT NOTICE | Trademarks | Privacy policy | Cookie policy | Terms of use | Terms of sale